Actions

Difference between revisions of "Upgrade from Pulse to IC-EDGE"

From Zenitel Wiki

(Select Edge Controller)
(Upgrade the Stations)
Line 23: Line 23:
  
 
== Upgrade the Stations ==
 
== Upgrade the Stations ==
In an IC-EDGE System all station must be upgraded to Edge. You cannot mix Edge and Pulse devices. <br>
+
Upgrade all stations and devices with firmware for Edge.
Make sure all Turbine station runs 5.0.3.0 or newer. <br>
+
* Software can be found [[Downloads#IC-EDGE_System|here]]
Inca stations must run 02.10.3.0 or newer. <br>
+
* Upgrade procedure using VS-IMT can be found [[VS-IMT_Upgrade_Stations|here]]. <br>
Software can be found [[Downloads#IC-EDGE_System|here]]. <br>
+
* Manual upgrade procedure can be found [[Turbine_Software_Upgrade|here]].
 
 
Upgrade procedure using VS-IMT can be found [[VS-IMT_Upgrade_Stations|here]]. <br>
 
Manual upgrade procedure can be found [[Turbine_Software_Upgrade|here]].
 
  
 
== Edge Configuration ==
 
== Edge Configuration ==

Revision as of 13:43, 11 September 2019

icon This article is under construction!


This article describes how to upgrade from a Pulse system to an IC-EDGE System.

Firmware versions

Firmware for Pulse:

  • In a Pulse system the Turbine devices are running firmware 3.x or 4.x.
  • In a Pulse system the INCA devices are running firmware 2.9 or earlier.

Firmware for IC-EDGE System:

  • In an IC-EDGE system all Turbine devices are running firmware 5.x.
  • In an IC-EDGE system all INCA devices are running firmware 2.10 or newer.
Note icon You cannot mix devices running Pulse and Edge firmware in the same system


Prerequisites

  • In an IC-EDGE System, INCA stations cannot be used as the Edge Controller. The Edge Controller must be a Turbine device. If the current Pulse Server is an INCA station, you must select a different device (Turbine) as the Edge Controller.
  • TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices.
  • VS-IMT can be used for station discovery and upgrade, but should not be used to configure Edge.

Licenses

Pulse licenses will be honored in an IC-EGDE System. When upgrading a Pulse Server to version 5.x, any licenses installed on the original Pulse Server will still be valid.
More information regarding licensing in Edge can be found here.

Upgrade the Stations

Upgrade all stations and devices with firmware for Edge.

  • Software can be found here
  • Upgrade procedure using VS-IMT can be found here.
  • Manual upgrade procedure can be found here.

Edge Configuration

Detailed information on how to configure Edge can be found here.