Difference between revisions of "Upgrade from Pulse to IC-EDGE"
From Zenitel Wiki
(→Upgrade the Stations) |
(→Upgrade the Stations) |
||
| Line 24: | Line 24: | ||
== Upgrade the Stations == | == Upgrade the Stations == | ||
Upgrade all stations and devices with firmware for Edge. | Upgrade all stations and devices with firmware for Edge. | ||
| − | * | + | * [[Downloads#IC-EDGE_System|Download software for IC-EDGE System]] |
* Upgrade procedure using VS-IMT can be found [[VS-IMT_Upgrade_Stations|here]]. <br> | * Upgrade procedure using VS-IMT can be found [[VS-IMT_Upgrade_Stations|here]]. <br> | ||
* Manual upgrade procedure can be found [[Turbine_Software_Upgrade|here]]. | * Manual upgrade procedure can be found [[Turbine_Software_Upgrade|here]]. | ||
Revision as of 13:45, 11 September 2019
|
This article is under construction! |
This article describes how to upgrade from a Pulse system to an IC-EDGE System.
Firmware versions
Firmware for Pulse:
- In a Pulse system the Turbine devices are running firmware 3.x or 4.x.
- In a Pulse system the INCA devices are running firmware 2.9 or earlier.
Firmware for IC-EDGE System:
- In an IC-EDGE system all Turbine devices are running firmware 5.x.
- In an IC-EDGE system all INCA devices are running firmware 2.10 or newer.
|
You cannot mix devices running Pulse and Edge firmware in the same system |
Prerequisites
- In an IC-EDGE System, INCA stations cannot be used as the Edge Controller. The Edge Controller must be a Turbine device. If the current Pulse Server is an INCA station, you must select a different device (Turbine) as the Edge Controller.
- TCIV video intercoms should not be used as the Edge Controller for systems exceeding 4 devices.
- VS-IMT can be used for station discovery and upgrade, but should not be used to configure Edge.
Licenses
Pulse licenses will be honored in an IC-EGDE System. When upgrading a Pulse Server to version 5.x, any licenses installed on the original Pulse Server will still be valid.
More information regarding licensing in Edge can be found here.
Upgrade the Stations
Upgrade all stations and devices with firmware for Edge.
- Download software for IC-EDGE System
- Upgrade procedure using VS-IMT can be found here.
- Manual upgrade procedure can be found here.
Edge Configuration
Detailed information on how to configure Edge can be found here.