Difference between revisions of "Upgrade from Pulse to IC-EDGE"
From Zenitel Wiki
(→Upgrade the system) |
ZenitelAus (talk | contribs) (Tag: Visual edit) |
||
Line 2: | Line 2: | ||
This article describes how to upgrade from a Pulse system to an IC-EDGE System. | This article describes how to upgrade from a Pulse system to an IC-EDGE System. | ||
− | == Firmware versions== | + | ==Firmware versions== |
− | Whether a device is operating in Pulse mode or in | + | Whether a device is operating in Pulse mode or in IC-EDGE mode, depends on the firmware version on the device. <br><br> |
'''Firmware for Pulse:'''<br> | '''Firmware for Pulse:'''<br> | ||
− | * In a Pulse system the [[:Category:Stations#Turbine stations|Turbine devices]] are running firmware 3.x or 4.x. | + | |
− | * In a Pulse system the [[:Category:Stations#INCA_stations|INCA devices]] are running firmware 2.9 or earlier. | + | *In a Pulse system the [[:Category:Stations#Turbine stations|Turbine devices]] are running firmware 3.x or 4.x. |
+ | *In a Pulse system the [[:Category:Stations#INCA_stations|INCA devices]] are running firmware 2.9 or earlier. | ||
'''Firmware for IC-EDGE System:'''<br> | '''Firmware for IC-EDGE System:'''<br> | ||
− | * In an IC-EDGE system all [[:Category:Stations#Turbine stations|Turbine devices]] are running firmware 5.x. | + | |
− | * In an IC-EDGE system all [[:Category:Stations#INCA_stations|INCA devices]] are running firmware 2.10 or newer. | + | *In an IC-EDGE system all [[:Category:Stations#Turbine stations|Turbine devices]] are running firmware 5.x. |
+ | *In an IC-EDGE system all [[:Category:Stations#INCA_stations|INCA devices]] are running firmware 2.10 or newer. | ||
{{note|You cannot mix devices running Pulse and Edge firmware in the same system}} | {{note|You cannot mix devices running Pulse and Edge firmware in the same system}} | ||
− | == Prerequisites == | + | ==Prerequisites== |
− | * In an IC-EDGE System, [[:Category:Stations#INCA_stations|INCA stations]] cannot be used as the | + | |
− | * TCIV video intercoms should not be used as the | + | *In an IC-EDGE System, [[:Category:Stations#INCA_stations|INCA stations]] cannot be used as the IC-EDGE Controller. The IC-EDGE Controller must be a Turbine device. If the current Pulse Server is an [[:Category:Stations#INCA_stations|INCA station]], you must select a different device (Turbine) as the IC-EDGE Controller. |
− | * [[VS-IMT_Upgrade_Stations|VS-IMT]] can be used for station discovery and upgrade, but should not be used to configure | + | *TCIV video intercoms should not be used as the IC-EDGE Controller for systems exceeding 4 devices. |
+ | *[[VS-IMT_Upgrade_Stations|VS-IMT]] can be used for station discovery and upgrade, but should not be used to configure IC-EDGE. | ||
+ | |||
+ | ==Licenses== | ||
+ | Pulse licenses will be honored in an IC-EDGE System. When upgrading a Pulse Server to version 5.x, any licenses installed on the original Pulse Server will still be valid. <br> | ||
+ | More information regarding licensing in IC-EDGE can be found [[Licensing_in_IC-EDGE|here]]. | ||
− | == | + | ==Upgrading the system== |
− | + | Upgrade all stations and devices with firmware for IC-EDGE. | |
− | |||
− | + | *[[Downloads#IC-EDGE_System|Download software for IC-EDGE System]] | |
− | + | *Upgrade procedure using the VS-IMT tool can be found [[VS-IMT_Upgrade_Stations|here]]. <br> | |
− | * [[Downloads#IC-EDGE_System|Download software for IC-EDGE System]] | + | *Manual upgrade procedure can be found [[Turbine_Software_Upgrade|here]]. |
− | * Upgrade procedure using the VS-IMT tool can be found [[VS-IMT_Upgrade_Stations|here]]. <br> | ||
− | * Manual upgrade procedure can be found [[Turbine_Software_Upgrade|here]]. | ||
− | == Edge Configuration == | + | ==Edge Configuration== |
− | Detailed information on how to configure | + | Detailed information on how to configure IC-EDGE can be found [[IC-EDGE_-_Getting_started|here]]. |
[[Category: IC-EDGE Configuration]] | [[Category: IC-EDGE Configuration]] |
Revision as of 00:54, 12 September 2019
This article describes how to upgrade from a Pulse system to an IC-EDGE System.
Firmware versions
Whether a device is operating in Pulse mode or in IC-EDGE mode, depends on the firmware version on the device.
Firmware for Pulse:
- In a Pulse system the Turbine devices are running firmware 3.x or 4.x.
- In a Pulse system the INCA devices are running firmware 2.9 or earlier.
Firmware for IC-EDGE System:
- In an IC-EDGE system all Turbine devices are running firmware 5.x.
- In an IC-EDGE system all INCA devices are running firmware 2.10 or newer.
Prerequisites
- In an IC-EDGE System, INCA stations cannot be used as the IC-EDGE Controller. The IC-EDGE Controller must be a Turbine device. If the current Pulse Server is an INCA station, you must select a different device (Turbine) as the IC-EDGE Controller.
- TCIV video intercoms should not be used as the IC-EDGE Controller for systems exceeding 4 devices.
- VS-IMT can be used for station discovery and upgrade, but should not be used to configure IC-EDGE.
Licenses
Pulse licenses will be honored in an IC-EDGE System. When upgrading a Pulse Server to version 5.x, any licenses installed on the original Pulse Server will still be valid.
More information regarding licensing in IC-EDGE can be found here.
Upgrading the system
Upgrade all stations and devices with firmware for IC-EDGE.
- Download software for IC-EDGE System
- Upgrade procedure using the VS-IMT tool can be found here.
- Manual upgrade procedure can be found here.
Edge Configuration
Detailed information on how to configure IC-EDGE can be found here.