Difference between revisions of "VSF-Fortitude8 8.1 Release Notes"
From Zenitel Wiki
(→Release info) |
(→VSF-FORTITUDE8 8.1.3.1) |
||
| (11 intermediate revisions by the same user not shown) | |||
| Line 13: | Line 13: | ||
*vsff8-prod-8.1.3.x - Used in production- and recovery upgrades. | *vsff8-prod-8.1.3.x - Used in production- and recovery upgrades. | ||
| − | '''Version:''' 8.1.3. | + | '''Version:''' 8.1.3.1<br> |
| − | '''Date:''' | + | '''Date:''' 29.02.2024 <br> |
'''Status:''' General Availability<br> | '''Status:''' General Availability<br> | ||
| − | =VSF-FORTITUDE8 8. | + | =VSF-FORTITUDE8 8.1.3.1= |
==Fixed Issues== | ==Fixed Issues== | ||
| − | === | + | === DS-817 Zenitel Connect Pro 1.1 compatible=== |
| − | + | Compatible with Zenitel Connect Pro 1.1. No changes for ICX-AlphaCom, SIP and IC-EDGE mode. | |
| − | |||
| − | ===MTN- | + | ==Known Issues== |
| − | + | === MTN-4333 HD-Audio mode not working using digital microphone input=== | |
| + | Audio is distorted when digital microphone is used. Audio is OK if using analogue microphone input | ||
| + | |||
| + | ===MTN-4121 Known issue: Asterisk discards alternative profiles=== | ||
| + | Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5. | ||
| + | |||
| + | The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182 | ||
| − | |||
<br> | <br> | ||
| − | =VSF-FORTITUDE8 8. | + | =VSF-FORTITUDE8 8.1.3.0= |
| − | |||
| − | |||
| − | |||
| − | |||
==Improvements== | ==Improvements== | ||
| − | === MTN- | + | ===MTN-4156 Added option for using Normally Closed switch on I/O Pins configured as input=== |
| − | + | The default input configuration is Normally Open and the switch contact needs to close to activate the function. A new option “Input NC” has been added to the I/O Pin configuration, which inverts the default behavior and the function is activated on switch open. | |
| − | |||
| − | |||
| − | |||
<br> | <br> | ||
==Issues fixed== | ==Issues fixed== | ||
| − | ===MTN- | + | === MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices === |
| − | + | The gain was increased after AEC but before the audio signal compander (with AGC function) so transmitted signal level reaches target level of -23 dBFS with “nominal voice input” | |
| + | |||
| + | === MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS=== | ||
| + | There was an issue with video stream in Ganz Control VMS, this is now fixed. | ||
| + | |||
| + | === MTN-4284 Relay activation by Pin code can now play audio messages === | ||
| + | Activating of Relay caused by PIN-code function will now trigger audio messages if it is configured. | ||
| − | === MTN- | + | === MTN-4230 Fixed issue where audio is not heard when station is using SRTP=== |
| − | + | When stations are registered to a SIP server using TLS, Secure SIP and SRTP, audio was heard only on the caller side. This is now fixed, and audio can be heard on both sides. | |
| − | === MTN- | + | === MTN-4219 'DAVC' and 'Offline Relays' were not visible in the station web menu in ICX-AlphaCom mode=== |
| − | + | The DAVC and Offline Relays settings are now available in the station web menu in ICX-AlphaCom mode. | |
| − | === MTN- | + | === MTN-4217 Allowing underscore in SNMP community string=== |
| − | + | Underscore is now allowed in the SNMP community string. | |
| − | === MTN- | + | === MTN-4095 Fixed an issue with distorted video when streaming in MJPG format from TCIV+=== |
| − | + | The sensor format configuration for MJPEG stream that was removed earlier has been added back. | |
<br> | <br> | ||
==Known Issues== | ==Known Issues== | ||
| + | === MTN-4333 HD-Audio mode not working using digital microphone input=== | ||
| + | Audio is distorted when digital microphone is used. Audio is OK if using analogue microphone input | ||
| + | |||
===MTN-4121 Known issue: Asterisk discards alternative profiles=== | ===MTN-4121 Known issue: Asterisk discards alternative profiles=== | ||
Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5. | Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5. | ||
Revision as of 15:37, 1 March 2024
- Previous Release - VSF-Fortitude8 8.0 Release Notes
This document provides the release notes for VSF-Fortitude8 8.1 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 8.0.3.2.
Contents
- 1 Release info
- 2 VSF-FORTITUDE8 8.1.3.1
- 3 VSF-FORTITUDE8 8.1.3.0
- 3.1 Improvements
- 3.2 Issues fixed
- 3.2.1 MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices
- 3.2.2 MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS
- 3.2.3 MTN-4284 Relay activation by Pin code can now play audio messages
- 3.2.4 MTN-4230 Fixed issue where audio is not heard when station is using SRTP
- 3.2.5 MTN-4219 'DAVC' and 'Offline Relays' were not visible in the station web menu in ICX-AlphaCom mode
- 3.2.6 MTN-4217 Allowing underscore in SNMP community string
- 3.2.7 MTN-4095 Fixed an issue with distorted video when streaming in MJPG format from TCIV+
- 3.3 Known Issues
Release info
Name: VSF-Fortitude8
Description: VSF-Fortitude8 is a firmware for Turbine Plus Intercoms including the following devices:
TCIV-2+, TCIV-3+, TCIV-5+, TCIV-6+, TKIV+, TMIV-1+, TEIV-1+ and TEIV-4+.
The firmware is delivered in two different files:
- vsff8-8.1.3.x - Used for standard in-field upgrades
- vsff8-prod-8.1.3.x - Used in production- and recovery upgrades.
Version: 8.1.3.1
Date: 29.02.2024
Status: General Availability
VSF-FORTITUDE8 8.1.3.1
Fixed Issues
DS-817 Zenitel Connect Pro 1.1 compatible
Compatible with Zenitel Connect Pro 1.1. No changes for ICX-AlphaCom, SIP and IC-EDGE mode.
Known Issues
MTN-4333 HD-Audio mode not working using digital microphone input
Audio is distorted when digital microphone is used. Audio is OK if using analogue microphone input
MTN-4121 Known issue: Asterisk discards alternative profiles
Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.
The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182
VSF-FORTITUDE8 8.1.3.0
Improvements
MTN-4156 Added option for using Normally Closed switch on I/O Pins configured as input
The default input configuration is Normally Open and the switch contact needs to close to activate the function. A new option “Input NC” has been added to the I/O Pin configuration, which inverts the default behavior and the function is activated on switch open.
Issues fixed
MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices
The gain was increased after AEC but before the audio signal compander (with AGC function) so transmitted signal level reaches target level of -23 dBFS with “nominal voice input”
MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS
There was an issue with video stream in Ganz Control VMS, this is now fixed.
MTN-4284 Relay activation by Pin code can now play audio messages
Activating of Relay caused by PIN-code function will now trigger audio messages if it is configured.
MTN-4230 Fixed issue where audio is not heard when station is using SRTP
When stations are registered to a SIP server using TLS, Secure SIP and SRTP, audio was heard only on the caller side. This is now fixed, and audio can be heard on both sides.
The DAVC and Offline Relays settings are now available in the station web menu in ICX-AlphaCom mode.
MTN-4217 Allowing underscore in SNMP community string
Underscore is now allowed in the SNMP community string.
MTN-4095 Fixed an issue with distorted video when streaming in MJPG format from TCIV+
The sensor format configuration for MJPEG stream that was removed earlier has been added back.
Known Issues
MTN-4333 HD-Audio mode not working using digital microphone input
Audio is distorted when digital microphone is used. Audio is OK if using analogue microphone input
MTN-4121 Known issue: Asterisk discards alternative profiles
Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.
The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182