Revision as of 14:21, 6 February 2024

Previous Release - VSF-Fortitude8 8.0 Release Notes

This document provides the release notes for VSF-Fortitude8 8.1 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 8.0.3.2.

Release info

Name: VSF-Fortitude8
Description: VSF-Fortitude8 is a firmware for Turbine Plus Intercoms including the following devices: TCIV-2+, TCIV-3+, TCIV-5+, TCIV-6+, TKIV+, TMIV-1+, TEIV-1+ and TEIV-4+.

The firmware is delivered in two different files:

vsff8-8.1.3.x - Used for standard in-field upgrades
vsff8-prod-8.1.3.x - Used in production- and recovery upgrades.

Version: 8.1.3.0
Date: 02.02.2024
Status: General Availability

VSF-FORTITUDE8 8.1.3.0

Improvements

MTN-4156 Added option for using Normally Closed switch on I/O Pins configured as input

The default input configuration is Normally Open and the switch contact needs to close to activate the function. A new option “Input NC” has been added to the I/O Pin configuration, which inverts the default behavior and the function is activated on switch open.

Issues fixed

MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices

The gain was increased after AEC but before the audio signal compander (with AGC function) so transmitted signal level reaches target level of -23 dBFS with “nominal voice input”

MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS

There was an issue with video stream in Ganz Control VMS, this is now fixed.

MTN-4284 Relay activation by Pin code can now play audio messages

Activating of Relay caused by PIN-code function will now trigger audio messages if it is configured.

MTN-4230 Fixed issue where audio is not heard when station is using SRTP

When stations are registered to a SIP server using TLS, Secure SIP and SRTP, audio was heard only on the caller side. This is now fixed, and audio can be heard on both sides.

MTN-4219 'DAVC' and 'Offline Relays' were not visible in the station web menu in ICX-AlphaCom mode

The DAVC and Offline Relays settings are now available in the station web menu in ICX-AlphaCom mode.

MTN-4217 Allowing underscore in SNMP community string

Underscore is now allowed in the SNMP community string.

Known Issues

MTN-4121 Known issue: Asterisk discards alternative profiles

Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.

The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182

@@ Line 27: / Line 27: @@
 ==Issues fixed==
-===MTN-4229 HD audio for back ground music distribution in ICX-AlphaCom produced noise===
+=== MTN-4346 User experience: Audio output level too low when in open duplex conversation with imx6 and im8 based devices ===
-Issue with PCM sampling is now fixed.
+The gain was increased after AEC but before the audio signal compander (with AGC function) so transmitted signal level reaches target level of -23 dBFS with “nominal voice input”
-=== MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco===
+=== MTN-4288 TCIV+ video stream is now working properly with Ganz Control VMS===
-There was an issue with SIP H.264 video calls with Genetec Sipelia and Cisco, this is now fixed.
+There was an issue with video stream in Ganz Control VMS, this is now fixed.
-=== MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS===
+=== MTN-4284 Relay activation by Pin code can now play audio messages ===
-There was an issue with how Report DAK and Report station call events as Digital Input in ONVIF options were behaving in Hanwha VMS, this is now fixed and they work as expected.
+Activating of Relay caused by PIN-code function will now trigger audio messages if it is configured.
-=== MTN-4176 AVC config now shown under Audio Settings===
+=== MTN-4230 Fixed issue where audio is not heard when station is using SRTP===
-AVC config was missing on 7.5 version. This is fixed, AVC is now visible and configurable.
+When stations are registered to a SIP server using TLS, Secure SIP and SRTP, audio was heard only on the caller side. This is now fixed, and audio can be heard on both sides.
-=== MTN-4072 JQuery version update to version 3.6.4===
+=== MTN-4219 'DAVC' and 'Offline Relays' were not visible in the station web menu in ICX-AlphaCom mode===
-Now the Station Web is running newer JQuery version with included JQuery migrate to support some of the older functions.
+The DAVC and Offline Relays settings are now available in the station web menu in ICX-AlphaCom mode.
+=== MTN-4217 Allowing underscore in SNMP community string===
+Underscore is now allowed in the SNMP community string.
 <br>

Difference between revisions of "VSF-Fortitude8 8.1 Release Notes"

From Zenitel Wiki