System Status (Event Type)
From Zenitel Wiki
(Redirected from Event 27)
Contents
Event description
| Event Owner: | Station number 1 (fixed) |
| Event type: | 27 - System Status |
| Subevent: | Device ID |
| When change to ON: | When a device is reported UP |
| When change to OFF: | When a device is reported DOWN |
| When related to: | N/A (Use "All") |
- Available from AMC 09.05. Pocket Paging from AMC 10.52. IP-HA state and %syse from 11.2.3.4.
Additional information
- Sub-event 1 – 64: RIO, PC (AlphaVision)
- Sub-event 65 – 68: Exchange modules
- The ON event is reported when all cards are scanned (exchange is operational). If the exchange is standby in IP-HA this sub event will not be reported.
- Sub-event 210 – 217: Serial ports 0 – 7
- Only AlphaNet and MultiModule is reported
- Sub-event 218 – 221: Pocket Paging ports "Tateco", "Ericcson", "Multitone", "Fire input", ISO1745 link poll status.
- Sub-event 230: ON = Local server is in Standby Mode. OFF = Operational Mode.
- Sub-event 231: ON = HA connection OK with related Standby/Operational server. OFF = No connection with remote server.
- After reset both events will be reported after sub-event 65. (In standby sub-event 65 will not be reported, but 230 and 231 will)
- Sub-event 232: ON = Local exchange is Primary Server (configuration master). OFF = Secondary Server (not configuration master). (Requires AMC 11.2.3.5)
- States reported in Sub-event 230, 231 and 232 are also reported in DEVICE_INFO
Macro to read current state of system event
%syse(sub_event)
Return 1 (TRUE) if sub event is ON.
Application
- System and AlphaNet surveillance and reporting
- Trigger actions after system boot
- 3rd party information of HA state