Actions

Difference between revisions of "Licensing in IC-EDGE"

From Zenitel Wiki

(Free License period)
Line 3: Line 3:
  
 
The following devices require a license:
 
The following devices require a license:
* Additional [[:category:Stations|Vingtor-Stentofon devices]] beyond the quantity of 32
+
* Additional [[:category:Stations|Vingtor-Stentofon devices]] beyond the quantity of 32. Maximum 64 devices in total.
* [[Configure 3rd party SIP devices (Edge)|3rd Party SIP devices]]
+
* [[Configure 3rd party SIP devices (Edge)|3rd Party SIP devices]]. Maximum 10 devices.
* [[:Category:IC-EDGE Integrations|Telephone gateways]]
+
* [[:Category:IC-EDGE Integrations|Telephone gateways]]. Maximum 10 gateways.
  
 
{{note|
 
{{note|

Revision as of 13:20, 29 March 2019

Edge-icon.jpg

Some devices used in the IC-EDGE System requires that a software license is installed. The license key is linked to the MAC address of the Edge Controller.

The following devices require a license:

Note icon
  • From factory there is a 60-day free license period during which all devices can be used without the need of any license.
  • When the free license period expires there must be a valid license installed, if not the licensed device will cease to operate


Available licenses

The following licenses are available:

License Item Number Comments
Intercom Extension 100 9661 001 License for additional Vingtor-Stentofon devices beyond 32. One license per device. Note that the first 32 devices do not require any license
SIP Client Extension 100 9661 201 License for 3rd party SIP telephone. One license per phone
TelTrunk 100 9662 001 License for GSM telephone gateway and Analog telephone gateway. One license per gateway


Installing a licence

To insert a license:

  • Obtain the license key from your local supplier
  • Log on to the Edge Controller
  • Select Edge Controller > Licensing
  • In the New License field enter a valid license code, then Activate License
License for 4 SIP devices installed