Difference between revisions of "Upgrade from Pulse to IC-EDGE"
From Zenitel Wiki
(→Prerequisites) |
(→Prerequisites) |
||
Line 16: | Line 16: | ||
==Prerequisites== | ==Prerequisites== | ||
− | *In an IC-EDGE System, [[:Category:Stations#INCA_stations|INCA stations]] ''cannot'' be used as the [[Edge Controller]]. If the current Pulse Server is an [[:Category:Stations#INCA_stations|INCA station]], you must | + | *In an IC-EDGE System, [[:Category:Stations#INCA_stations|INCA stations]] ''cannot'' be used as the [[Edge Controller]]. If the current Pulse Server is an [[:Category:Stations#INCA_stations|INCA station]], you must choose a different device in the installation as the Edge Controller. Here is a [[Edge Controller|list showing which devices can act as Edge Controller]]. |
*[[VS-IMT_Upgrade_Stations|VS-IMT]] can be used for station discovery and upgrade, but should not be used to configure IC-EDGE. | *[[VS-IMT_Upgrade_Stations|VS-IMT]] can be used for station discovery and upgrade, but should not be used to configure IC-EDGE. | ||
Revision as of 15:02, 10 August 2021
This article describes how to upgrade from a Pulse system to an IC-EDGE System.
Firmware versions
Whether a device is operating in Pulse mode or in IC-EDGE mode, depends on the firmware version on the device.
Firmware for Pulse:
- The Turbine devices are running firmware 3.x or 4.x.
- The INCA devices are running firmware 2.9 or earlier.
Firmware for IC-EDGE System:
- The Turbine devices are running firmware 5.x.
- The INCA devices are running firmware 2.10 or newer.
Prerequisites
- In an IC-EDGE System, INCA stations cannot be used as the Edge Controller. If the current Pulse Server is an INCA station, you must choose a different device in the installation as the Edge Controller. Here is a list showing which devices can act as Edge Controller.
- VS-IMT can be used for station discovery and upgrade, but should not be used to configure IC-EDGE.
Licenses
Pulse licenses will be honored in an IC-EDGE System. When upgrading a Pulse Server to version 5.x, any licenses installed on the original Pulse Server will still be valid.
More information regarding licensing in IC-EDGE can be found here.
Upgrading the system
Upgrade all stations and devices with firmware for IC-EDGE.
- Download software for IC-EDGE System
- Upgrade procedure using the VS-IMT tool can be found here.
- Manual upgrade procedure can be found here.
Edge Configuration
Detailed information on how to configure IC-EDGE can be found here.