IP Desk Master -V2-P: Difference between revisions

Latest revision as of 11:04, 23 January 2025

This product has been discontinued!

IP Desktop station 1008400090 (IPDM-V2-P)

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration for the IP Master station:

@@ Line 1: / Line 1: @@
-{{AEIS}}
+{{Obsolete}}
-[[File:1008000000 IP Desktop Master Station display Front.jpg|thumb|200px|IP Desktop station 1008400090 (IPDM-V2-P)]]
+{{ACEIS}}
+[[File:IPDM-V2-P-newZ.png|thumb|400px|IP Desktop station 1008400090 (IPDM-V2-P)]]
 ==Getting Started==
 *[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 Station specific configuration for the IP Master station:
 *[[Users_%26_Stations_(AlphaPro)#DAK|Customized text on navigation buttons - ICX-AlphaCom mode]]
@@ Line 33: / Line 33: @@
 ==Software Requirements==
-This station is fully supported as from ICX-AlphaCom version 11.2.3.7
+* Minimum firmware version: 7.3.3.0
 ==Related information==
@@ Line 40: / Line 40: @@
 [[Category: Turbine]]
+[[Category: Discontinued Stations]]