Clean room intercom station IP-CROR: Difference between revisions

Latest revision as of 13:09, 18 February 2025

The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms.

IP-CROR station (1008415000)

Getting Started

Configuration from Display Menu

Configuration

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration:

Customized text on navigation buttons - ICX-AlphaCom mode

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as from ICX-AlphaCom version 11.2.3.7

Related information

Additional Documentation on Zenitel.com

@@ Line 1: / Line 1: @@
-{{AEIS}}
+{{ACEIS}}
-[[File:1008015000 1.jpg|thumb|350px|IP OR station 100 8415 000]]
+The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms.
+[[File:IP-CROR-newZ.png|thumb|350px|IP-CROR station (1008415000)]]
 ==Getting Started==
+* [[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
-*[[IP Flush Connections|IP OR Station connections]]
-*[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
+* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
-*[[IP Station Configuration - ICX-AlphaCom mode]]
+* [[Adding station to existing system (Edge)|Edge mode]]
-*[[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
-*[[SIP Intercom Configuration|IP Station Configuration - SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 Station specific configuration:
@@ Line 18: / Line 18: @@
 ==Restore Factory Defaults and Software Upgrade==
 *[[IP Master Station -V2 Restore Factory Defaults|Restore factory default settings]]
 *[[IP Master Station -V2 Software Upgrade|Upgrade via the station web interface]]
-*[[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
+*[[:Category:IMX6 Release notes|Software Release Notes]]
 ==Connectors, Indicators and Dimensions==
+* [[IP Flush Master -V2 Board Connectors|Device Connectors]]
-*[[IP Flush Master -V2 Board Connectors|Board Connectors]]
+* [[IP Flush Master Station LED Indications|Station LED Indications]]
-*[[IP Flush Master Station LED Indications|Station LED Indications]]
+* [[IP OR Station Dimensions & Mounting Instructions|Dimensions and mounting]]
-*[[IP OR Station Dimensions & Mounting Instructions|Dimensions and mounting]]
 ==Accessories==
-*[[Back box flush mount - 1008098700|1008098700 - Flush Master Back Box]]
+* [[Back box flush mount - 1008098700|1008098700 - Flush Master Back Box]]
+* [[Back box on wall mount - 2810021001|2810021001 - On Wall Back Box]]
 ==Software Requirements==
@@ Line 39: / Line 39: @@
 ==Related information==
-*[http://www.zenitel.com/product/ip-or-master Additional Documentation on Zenitel.com]
+*[https://www.zenitel.com/product/ip-cror Additional Documentation on Zenitel.com]
 [[Category: Turbine]]