Clean room intercom station IP-CROR: Difference between revisions
From Zenitel Wiki
| (6 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{ | {{ACEIS}} | ||
[[File: | The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms. | ||
[[File:IP-CROR-newZ.png|thumb|350px|IP-CROR station (1008415000)]] | |||
==Getting Started== | ==Getting Started== | ||
| Line 6: | Line 8: | ||
==Configuration== | ==Configuration== | ||
The | The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to. | ||
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | ||
* [[Adding station to existing system (Edge)|Edge mode]] | * [[Adding station to existing system (Edge)|Edge mode]] | ||
* [[SIP Intercom - Web Interface|SIP mode]] | * [[SIP Intercom - Web Interface|SIP mode]] | ||
{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}} | |||
Station specific configuration: | Station specific configuration: | ||
| Line 16: | Line 18: | ||
==Restore Factory Defaults and Software Upgrade== | ==Restore Factory Defaults and Software Upgrade== | ||
*[[IP Master Station -V2 Restore Factory Defaults|Restore factory default settings]] | *[[IP Master Station -V2 Restore Factory Defaults|Restore factory default settings]] | ||
*[[IP Master Station -V2 Software Upgrade|Upgrade via the station web interface]] | *[[IP Master Station -V2 Software Upgrade|Upgrade via the station web interface]] | ||
| Line 30: | Line 31: | ||
==Accessories== | ==Accessories== | ||
*[[Back box flush mount - 1008098700|1008098700 - Flush Master Back Box]] | * [[Back box flush mount - 1008098700|1008098700 - Flush Master Back Box]] | ||
* [[Back box on wall mount - 2810021001|2810021001 - On Wall Back Box]] | |||
==Software Requirements== | ==Software Requirements== | ||
Latest revision as of 13:09, 18 February 2025
The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms.
Getting Started
Configuration
The device can operate in different modes. Set the mode according to the server the station should register to.
|
To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server. |
Station specific configuration:
Restore Factory Defaults and Software Upgrade
- Restore factory default settings
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Accessories
Software Requirements
This station is fully supported as from ICX-AlphaCom version 11.2.3.7