Actions

Difference between revisions of "VSF-Fortitude8 8.0 Release Notes"

From Zenitel Wiki

(Created page with "* Previous Release - VSF-Fortitude8 7.5 Release Notes This document provides the release notes for VSF-Fortitude8 8.0 with incremental bug fix releases. The release notes...")
 
(→‎Release info)
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
* Previous Release - [[VSF-Fortitude8 7.5 Release Notes]]
 
* Previous Release - [[VSF-Fortitude8 7.5 Release Notes]]
 +
* Next Release - [[VSF-Fortitude8 8.1 Release Notes]]
  
 
This document provides the release notes for VSF-Fortitude8 8.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 7.5.3.1.
 
This document provides the release notes for VSF-Fortitude8 8.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 7.5.3.1.
  
 
==Release info==
 
==Release info==
−
'''Name:''' VSF-Turbine <br>
+
'''Name:''' VSF-Fortitude8 <br>
−
'''Description:''' VSF-Fortitude8 is a firmware for Turbine Plus Intercoms including the following devices:
+
'''Description:''' VSF-Fortitude8 is a firmware for [[Zenitel Devices based on iMX8|Zenitel devices based on the IMX8 processor]].
−
[[TCIV-2+]], [[TCIV-3+]], [[TCIV-5+]], [[TCIV-6+]], [[TKIV+]] and [[TMIV-1+]]
 
  
 
The firmware is delivered in two different files:
 
The firmware is delivered in two different files:
  
−
*vsff8-7.5.3.x - Used for standard in-field upgrades
+
*vsff8-8.0.3.x - Used for standard in-field upgrades
−
*vsff8-prod-7.5.3.x - Used in production- and recovery upgrades.
+
*vsff8-prod-8.0.3.x - Used in production- and recovery upgrades.
  
−
'''Version:''' 7.5.3.1<br>
+
'''Version:''' 8.0.3.2<br>
−
'''Date:''' 23.05.2023 <br>
+
'''Date:''' 27.11.2023 <br>
 
'''Status:''' General Availability<br>
 
'''Status:''' General Availability<br>
  
−
=VSF-FORTITUDE8 7.5.3.1=
+
=VSF-FORTITUDE8 8.0.3.2=
 +
==Fixed Issues==
 +
===MTN-4292 Acknowledgement of network settings via apply button===
 +
In version 8.0.3.1 the network settings were saved immediately when pressing the Save button, which caused the device to reboot without notifying the user. This is now fixed, and as in earlier software releases, the user is redirected to a new page with an Apply button to confirm the new network configuration.
 +
 
 +
This issue also affected Zenitel IMT: In combination with version 8.0.3.1, the Zenitel IMT configuration wizard would get stuck when changing network settings and saving. This is now fixed.
 +
 
 +
===MTN-4238 The Dynamic Range Compression (DRC) could cause signal clipping of the loudspeaker output when the DRC was set to a high value.===
 +
Modified how the gain is applied to the DRC to reduce the risk of signal clipping.
 +
 
 +
Note that DRC is a dynamic digital signal gain adjust function, and some signal clipping may still occur on high DRC gain configuration.
 +
 
 +
<br>
 +
 
 +
=VSF-FORTITUDE8 8.0.3.1=
 +
==Fixed Issues==
 +
===DS-706 Internal update, no impact on functionality.===
 +
 
 +
<br>
 +
 
 +
=VSF-FORTITUDE8 8.0.3.0=
 
==Improvements==
 
==Improvements==
−
===MTN-4004 Added support for more complex passwords===
+
=== MTN-2448 Support for uploading HTTPS certificates===  
−
Passwords can now be 32 characters long, numbers, letters and the following special characters are supported ?!@$*,.-
+
A more user friendly approach to allow end-user to generate the CSR, and to upload HTTPS certificate to the devices.
−
The password must meet the following criteria:
 
−
* Minimum length of 8 characters
 
−
* At least three out of the following four requirements must be met:
 
−
** Contains at least one digit (0-9)
 
−
**Contains at least one uppercase letter (A-Z)
 
−
** Contains at least one lowercase letter (a-z)
 
−
**Contains at least one special character
 
  
−
===MTN-3259 Added option to make device ringlists independent of Edge Controller ringlist updates===
+
=== DS-592 OpenSSL upgraded to 3.0===  
−
When ‘No updates from Edge Controller’ checkbox is enabled, the ringlist is managed locally in the station. Global ringlist configuration in the Edge Controller is then ignored.  
+
OpenSSL has been upgraded to the latest LTS version.
  
 
<br>
 
<br>
  
 
==Issues fixed==
 
==Issues fixed==
−
=== MTN-4167 Upgrade of IPDM-V2_P now possible===  
+
===MTN-4229 HD audio for back ground music distribution in ICX-AlphaCom produced noise===
−
Hardware revision 2 of the IPDM-V2_P failed to upgrade. This is resolved, and you can now upgrade to 7.5.3.1 or newer versions. Note that it is not possible to downgrade to versions older than 7.5.3.1.
+
Issue with PCM sampling is now fixed.  
−
 
 
−
=== MTN-4148 Circle showing PTZ location is now visible again===
 
−
In image settings for video devices, the circle showing PTZ location was not showing. this is now fixed.
 
  
−
=== MTN-4056 It's now possible to disable OPTIONS timeout in Edge mode===  
+
=== MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco===  
−
Added a text field to disable or change the timeout for SIP OPTIONS when in Edge mode. Setting the timeout to 0 disables it. This option is analog to the one provided in SIP mode.
+
There was an issue with SIP H.264 video calls with Genetec Sipelia and Cisco, this is now fixed.
  
−
=== MTN-4047 It’s now possible to use W as the second letter in a password===  
+
=== MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS===  
−
The issue was that with W as second letter in a password you could not get access to the video configuration page on the device web. This is now fixed.
+
There was an issue with how Report DAK and Report station call events as Digital Input in ONVIF options were behaving in Hanwha VMS, this is now fixed and they work as expected.
  
−
=== MTN-4000 RTSP can now be enabled or disabled===  
+
=== MTN-4176 AVC config now shown under Audio Settings===  
−
RTSP stream can be manually enabled or disabled (it's enabled by default), when disabled all RTSP related settings get grayed out (disabled).
+
AVC config was missing on 7.5 version. This is fixed, AVC is now visible and configurable.
  
−
=== MTN-3941 Accepting and responding with correct payload type===  
+
=== MTN-4072 JQuery version update to version 3.6.4===  
−
When receiving a video call, the TCIV+ would respond 200 OK with a Payload type which was different from the Payload type actually used. This could sometimes cause video issues such as late or no video at all.
+
Now the Station Web is running newer JQuery version with included JQuery migrate to support some of the older functions.
  
 
<br>
 
<br>

Latest revision as of 09:19, 21 June 2024

This document provides the release notes for VSF-Fortitude8 8.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 8.0 describe new features, improvements and issues fixed after VSF-Fortitude8 7.5.3.1.

Release info

Name: VSF-Fortitude8
Description: VSF-Fortitude8 is a firmware for Zenitel devices based on the IMX8 processor.

The firmware is delivered in two different files:

  • vsff8-8.0.3.x - Used for standard in-field upgrades
  • vsff8-prod-8.0.3.x - Used in production- and recovery upgrades.

Version: 8.0.3.2
Date: 27.11.2023
Status: General Availability

VSF-FORTITUDE8 8.0.3.2

Fixed Issues

MTN-4292 Acknowledgement of network settings via apply button

In version 8.0.3.1 the network settings were saved immediately when pressing the Save button, which caused the device to reboot without notifying the user. This is now fixed, and as in earlier software releases, the user is redirected to a new page with an Apply button to confirm the new network configuration.

This issue also affected Zenitel IMT: In combination with version 8.0.3.1, the Zenitel IMT configuration wizard would get stuck when changing network settings and saving. This is now fixed.

MTN-4238 The Dynamic Range Compression (DRC) could cause signal clipping of the loudspeaker output when the DRC was set to a high value.

Modified how the gain is applied to the DRC to reduce the risk of signal clipping.

Note that DRC is a dynamic digital signal gain adjust function, and some signal clipping may still occur on high DRC gain configuration.


VSF-FORTITUDE8 8.0.3.1

Fixed Issues

DS-706 Internal update, no impact on functionality.


VSF-FORTITUDE8 8.0.3.0

Improvements

MTN-2448 Support for uploading HTTPS certificates

A more user friendly approach to allow end-user to generate the CSR, and to upload HTTPS certificate to the devices.

DS-592 OpenSSL upgraded to 3.0

OpenSSL has been upgraded to the latest LTS version.


Issues fixed

MTN-4229 HD audio for back ground music distribution in ICX-AlphaCom produced noise

Issue with PCM sampling is now fixed.

MTN-4206 SIP H.264 video calls are now working properly with Genetec Sipelia and Cisco

There was an issue with SIP H.264 video calls with Genetec Sipelia and Cisco, this is now fixed.

MTN-4181 Report DAK and Report station call events as Digital Input in ONVIF options are now working for Hanwha VMS

There was an issue with how Report DAK and Report station call events as Digital Input in ONVIF options were behaving in Hanwha VMS, this is now fixed and they work as expected.

MTN-4176 AVC config now shown under Audio Settings

AVC config was missing on 7.5 version. This is fixed, AVC is now visible and configurable.

MTN-4072 JQuery version update to version 3.6.4

Now the Station Web is running newer JQuery version with included JQuery migrate to support some of the older functions.


Known Issues

MTN-4121 Known issue: Asterisk discards alternative profiles

Default setting for ITSV-5 sends 3 types (BP & MP & HP). However, Asterisk discards all but the first profile it receives (HP in this case). Since only the "Baseline profile" is supported on the device the video doesn't load. A workaround to this issue is to select "Baseline profile" as the H.264 profile type on the ITSV-5.

The issue has been reported and documented here: https://issues.asterisk.org/jira/browse/ASTERISK-29182



Retrieved from "https://wiki.zenitel.com/w/index.php?title=VSF-Fortitude8_8.0_Release_Notes&oldid=236757"