Actions

Difference between revisions of "TCIS-2"

From Zenitel Wiki

(Accessories)
Line 1: Line 1:
{{APS}}[[file:TCIS2.PNG|right|200px|thumb|Turbine substation<br>(100 8111 020)]]
+
{{AEPS}}[[file:TCIS2.PNG|right|200px|thumb|Turbine substation<br>(100 8111 020)]]
 
== Getting started ==
 
== Getting started ==
 
* [[TCIS Connections|Connecting your Turbine Intercom station]]
 
* [[TCIS Connections|Connecting your Turbine Intercom station]]
Line 7: Line 7:
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
 
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
 
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
 
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]]
 +
* [[Adding station to existing system (Edge)|Edge mode]]
 
* [[SIP Intercom Configuration|SIP mode]]
 
* [[SIP Intercom Configuration|SIP mode]]
 
* [[IP Station Configuration - Pulse mode|Pulse mode]]
 
* [[IP Station Configuration - Pulse mode|Pulse mode]]

Revision as of 15:58, 5 December 2019

AEPS.png
Turbine substation
(100 8111 020)

Getting started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.7

Related Information