Actions

Difference between revisions of "ICX 1.3.3.X - Release Notes"

From Zenitel Wiki

(→‎MTN-4365 Update OpenSSL version)
(→‎MTN-4365 Update OpenSSL version)
Line 39: Line 39:
 
==Security fixes and improvements==
 
==Security fixes and improvements==
 
=== MTN-4365 Update OpenSSL version ===
 
=== MTN-4365 Update OpenSSL version ===
−
ICX-Alphacom and ICX-Core is updated to OpenSSL 3.0.
+
ICX-Alphacom and ICX-Core are updated to OpenSSL 3.0.
  
 
=== MTN-4366 Updated web banner for ICX-Alphacom===
 
=== MTN-4366 Updated web banner for ICX-Alphacom===

Revision as of 12:47, 21 February 2024

Previous Release - ICX 1.2.3.X - Release Notes

This article provides the release notes for ICX-500, ICX-510 and ICX-Core software 1.3.3.x with incremental bug fix releases. This release notes describe new features, improvements and issues fixed after ICX 1.2.3.x.

Contents

General information

VSF-ICX-500 is a firmware archive for the ICX-500 Intelligent Gateway platform.

  • vsfx-1.3.3.x{-n}.swu - Used for standard in-field upgrades
  • vsfx-prod-1.3.3.x{n}.img.zip - Used in-field recovery and major system upgrades (SD-Card update)
  • vsfx-prod-1.3.3.x{n}.zip - Used in production upgrade only.
Note icon
  • The first 4 numbers in version directly links to the the ICX-Core version.
  • The last optional "-n" number is added for vsfx build with only platform changes form the first ICX-Core build for vsfx.''


ICX-Core software is an "apt" installation package for Ubuntu 22.04.x LTS Server containing the same functional capabilities as the ICX-500 Intelligent Gateway platform.

  • ICX-Core-01.00-jammy-1.3.3.X.apt.tar - Used for installation from the Ubuntu shell or from ICX-Web interface on already running ICX-Core systems.

Software Upgrade information

ICX 1.3.3.0

Release info

ICX Version: 1.3.3.0
Date: 21.02.2024
Status: General Availability

Bug fixes

MTN-4311 Updated ICX-5x0 hardware labels in web

The hardware version "ICX-510" is now correctly displayed in System Monitoring > Node Information in the ICX web interface



Security fixes and improvements

MTN-4365 Update OpenSSL version

ICX-Alphacom and ICX-Core are updated to OpenSSL 3.0.

MTN-4366 Updated web banner for ICX-Alphacom


ICX 1.2.3.8

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.8
Date: 07.02.2023
Status: General Availability

Note icon If you are upgrading from ICX-AlphaCom Core 1.2.3.7 or below, you must add the php8.1 repository prior to upgrade. To add the php8.1 repository, from the linux console enter the following command.
sudo add-apt-repository ppa:ondrej/php



Bug fixes

MTN-3913 Support SNMP GET and Walk for nodeState

MTN-3925 Fixed wrong active I/O reported on station startup

MTN-3976 Fixed issue where SIP station hangs if disconnected when queued in ringing group

Security fixes and improvements

MTN-4041 Updated Linux kernel and libraries


ICX 1.2.3.7

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.7
Date: 18.11.2022
Status: General Availability

Bug fixes

MTN-2675 Node Name not Updated

The "Node name" should now be updated according to the name configured in AlphaPro

MTN-3725 Fixed an issue where time was set in wrong 12/24 hour format

MTN-3802 Removed deprecated quick edit mode

MTN-3808 Suppressed RTPD busy syslog messages

MTN-3812 Fixed issue with 12/24 hour clock when setting time

MTN-3842 Fixed issue for synchronization of state data between IPHA nodes

MTN-3927 Fixed issue with hanging SIP calls when SIP device disconnects unexpectedly

MTN-3932 Fixed issue where NTP server did not work after a reboot

MTN-3938 Fixed an issue where reconnecting network adapters at the same time caused IPHA collision

MTN-3942 Fixed an issue where 16 character node name sent from Alphapro caused reset

MTN-3953 Fixed issue where Alphacom replied to wrong SIP port on CANCEL-request if alternative port is used




ICX 1.2.3.6

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.6
Date: 28.06.2022
Status: General Availability

Bug fixes

MTN-3804 ICX-Core: Default gateway is now saved after installation script is run on a VM

MTN-3811 Fix issue where IPHA lost operational IP on cable hot swapping.


Security fixes and improvements

MTN-3836 Added new function $SMALL_RESET to simulate small reset sent from web

Will send proper shutdown signal and trigger system status messages, improvement on $RESET implementation.

MTN-3837 Added ZAP port in web firewall settings


ICX 1.2.3.5

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.5
Date: 04.05.2022
Status: General Availability

Bug fixes

MTN-3704 Fixed issue where noise was introduced after a voice message stopped playing

When a prerecorded voice message played there sometimes was a noticeable pop noise at the end of the playback.

MTN-3737 All ENA amplifiers now take the correct ENA license

The ENA amplifiers ENA-2200, ENA-2200-AC2 and ENA-2400-AC2 did not take the "ENA Amplifier" license.

MTN-3740 Fixed audio recording issue with outbound calls to SIP Trunk

MTN-3753 Fixed ICX-Core VM install script failure issue

An error message was displayed at the end of the installation of the ICX-Core software.

MTN-3770 When updating firmware on a registered device, the Noise Reduction value will now be kept

In previous versions the Noise Reduction would be disabled (the value set to 0 in the ICX-AlphaCom server) after firmware update of a device. This could be perceived as different audio quality after an upgrade of the device. This is now fixed, and the Noise Reduction value is kept in ICX-AlphaCom server after upgrading the firmware of a device.


ICX 1.2.3.4

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.4
Date: 08.03.2022
Status: General Availability

Bug fixes

MTN-3519 IPHA Did not Trigger Subevent 231 on Small/Chilly Reset

MTN-3614 Force gratuitous ARP on IPHA takeover

MTN-3622 Fixed issue with missing SIP "From" field to Recorder

The Recorder would show originating station as a question mark (?). This is now fixed.

MTN-3655 Resolved an Issue Causing IPHA Conflict on Takeover


ICX 1.2.3.3

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.3
Date: 26.11.2021
Status: General Availability

Security fixes and improvements

MTN-3575 Production update, no impact on the functionality



ICX 1.2.3.2

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.2
Date: 26.11.2021
Status: General Availability

Security fixes and improvements

MTN-3575 Production update, no impact on the functionality


ICX 1.2.3.1

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.1
Date: 26.11.2021

Security fixes and improvements

MTN-3574 Production update, no impact on the functionality


ICX 1.2.3.0

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.0
Date: 19.11.2021
Status: General Availability

Bug fixes

MTN-2971 Updated JQuery library for security hardening

MTN-3047 Expand SIP trunk to SIP trunk digit limit from 7 to 16 digits

MTN-3175 Fixed issue with scripter SSH access

Will now also sync web user credentials with Linux credentials for script users

MTN-3246 Fixed NTP Get Time issue

MTN-3297 Expand SIP numbers from 16 digits to 24 digits

MTN-3371 NTP no longer uses mode 0 to send initial request

MTN-3382 Improved handling of logs for better flash utilization

MTN-3392 Corrected ENA-2200AC now ENA license issue

MTN-3396 $ALRM to single station now correctly triggers volume override

MTN-3414 Hanging SIP Station in Ringing group After Lost Connection

Fixed issue causing a disconnected SIP station in a ringing group call to hang.

MTN-3431 Support for SNMP walk nodeState

MTN-3505 Fixed issue where billing with PIN code did not work as expected



Security fixes and improvements

MTN-2984 Setting Unreachable NTP Server is now Possible

It should now be possible to set an unreachable NTP server if needed for offline configuration.

MTN-3441 Support for Custom SNMPTrap Community String


Retrieved from "https://wiki.zenitel.com/w/index.php?title=ICX_1.3.3.X_-_Release_Notes&oldid=235858"