Clean room intercom station IP-CROR: Difference between revisions

Revision as of 16:10, 3 January 2025

The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms.

IP-CROR station (1008415000)

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration:

This station is fully supported as from ICX-AlphaCom version 11.2.3.7

@@ Line 1: / Line 1: @@
-{{AEIS}}
+{{ACEIS}}
 The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms.
@@ Line 8: / Line 8: @@
 ==Configuration==
-The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}
 Station specific configuration:
@@ Line 18: / Line 18: @@
 ==Restore Factory Defaults and Software Upgrade==
 *[[IP Master Station -V2 Restore Factory Defaults|Restore factory default settings]]
 *[[IP Master Station -V2 Software Upgrade|Upgrade via the station web interface]]