Difference between revisions of "TFIX-4"
From Zenitel Wiki
imported>Asle (→Configuration) |
imported>Asle (→Configuration) |
||
Line 13: | Line 13: | ||
* [[IP Station Configuration - Pulse mode|Pulse mode]] | * [[IP Station Configuration - Pulse mode|Pulse mode]] | ||
− | TFIX-4 specific configuration: In the web interface of the station, select '''Product Model And Accessory''' = '''TFIX-1''' ("TFIX-4" is not an available option). | + | {{note|TFIX-4 specific configuration: In the web interface of the station, select '''Product Model And Accessory''' = '''TFIX-1''' ("TFIX-4" is not an available option).}} |
== Restore Factory Defaults and Software Upgrade == | == Restore Factory Defaults and Software Upgrade == |
Revision as of 14:53, 22 May 2019
Contents
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Flowire Software Upgrade Procedure