Difference between revisions of "TFIX-3"
From Zenitel Wiki
(→Accessories) |
|||
| Line 1: | Line 1: | ||
| − | {{ | + | {{AEPS}}[[file:TFIX-3 Descr.png|thumb|400px|Turbine Industry - EX<br>(100 8123 030)]] |
== Getting started == | == Getting started == | ||
* [[TFIX Connections|Connections]] | * [[TFIX Connections|Connections]] | ||
| Line 9: | Line 9: | ||
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. | The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. | ||
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | * [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | ||
| + | * [[Adding station to existing system (Edge)|Edge mode]] | ||
* [[SIP Intercom Configuration|SIP mode]] | * [[SIP Intercom Configuration|SIP mode]] | ||
* [[IP Station Configuration - Pulse mode|Pulse mode]] | * [[IP Station Configuration - Pulse mode|Pulse mode]] | ||
Revision as of 16:05, 5 December 2019
Contents
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Flowire Software Upgrade Procedure
Connectors, Indicators and Dimensions
Accessories
Software Requirements
This station is fully supported as form AlphaCom version 11.2.3.11