Difference between revisions of "IP-LCM"
From Zenitel Wiki
ZenitelAus (talk | contribs) (Tag: Visual edit) |
(→Configuration) |
||
| Line 29: | Line 29: | ||
General configuration: | General configuration: | ||
| − | *[[ | + | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] |
*[[Adding station to existing system (Edge)|Edge mode]] | *[[Adding station to existing system (Edge)|Edge mode]] | ||
*[[SIP Intercom Configuration|SIP mode]] | *[[SIP Intercom Configuration|SIP mode]] | ||
Revision as of 08:15, 25 March 2021
The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.
- 8 relay outputs
- 8 control inputs
- Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
- Device powered via the TKIS-2 kit using PoE or local power
- All TKIS-2 features are available, including:
- 1 relay
- 6 inputs
Contents
Software requirements
The IP-LCM is fully supported as from ver 4.11.
License Requirements
- An IP Station License is required in the AlphaCom. An IP Station License is required for ICX-AlphaCom.
- Even if only the I/O part of the IP-LCM is used a license is required!
Getting started
Configuration
General configuration:
Device specific configuration for the IP-LCM:
Restore Factory Defaults and Software Upgrade
Connectors, Indicators and Dimensions
Software Requirements
When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7