Actions

Kits - Comparison chart

From Zenitel Wiki

Revision as of 15:12, 1 October 2021 by Asle (talk | contribs) (Application areas)
AEIS.png

Zenitel offers a number of IP based kits, which can be used for a wide range of applications. The kits are supported in all modes of operation (Edge, SIP and ICX-AlphaCom).

This article compares the properties and capabilities of the different kits, and indicated which kit is best fit for a certain application.

Kit offerings

TKIS-2 2.png TKIE.png TKIE-2.PNG TKIE.png IP-LCM 1.jpg TKIV+.jpg
TKIS-2 TKIE-1 TKIE-2 TKIE-3 IP-LCM TKIV+


Properties and capabilities

Kit General Audio out Audio In I/Os Accessories Support for:
Name Item no. Housing Ethernet ports Loudspeaker output Line Out (0 dBm) Additional speaker Microphone Line In Relays Digital I/Os Inputs as key matrix Handset Headset Keyboard LCD Display DAK48 module Camera
TKIS-2 1008131020 Plastic 1 10W Yes No Electret mic No 1 6 Yes *** No No No No No No
TKIE-1 1008132010 No 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes No No No No
TKIE-2 1008132020 Metal 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes No No No No
TKIE-3 1008132030 No 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes Yes No No No
IP-LCM 1008095201 Plastic 1 10W Yes No Electret mic No 8 + 1 8 + 6 Yes *** No No No No No No
TKIV+ 1008331010 Plastic 1 10W Yes No Electret mic No 1 6 Yes *** No No No No No Yes
IPMSK-V2 1008493000 No 2 1.5W No 5 W Electret mic No 1 3 inputs No Yes Yes Yes Yes Yes No


* Two more relays (4 in total) can be added to the TKIE kit by using the TA-10 module.
** LCD Display for Master kit: 1008099000
*** Four inputs can be combined in a matrix function, providing 15 inputs. This is supported in SIP mode and Edge mode only.


Relay switching capacity:

  • TKIS and TKIE: 60 watt (max. 250VAC)
  • IP-LCM and TA-10: 8A (max. 250VAC)


Application areas

The table below shows which kit is best fit for a certain application. Please note that often several types of kits might be suitable for the same application.

Category Application TKIS-2 TKIE-1 TKIE-2 TKIE-3 IP-LCM TKIV+ IPMSK-V2
Substation Up to 6 call buttons *** Checkbox.png
Substation Including camera Checkbox.png
Substation Including handset support Checkbox.png Checkbox.png
Substation Including headset support Checkbox.png Checkbox.png
Masterstation with full keypad Checkbox.png Checkbox.png
Masterstation with full keypad and LCD display Checkbox.png
Masterstation with full keypad, LCD display and support for DAK-48 module Checkbox.png
Audio Interface PA (Public Address) amplifer Checkbox.png
Audio Interface Mobile Radio system Checkbox.png Checkbox.png
Audio Interface Program Source (ICX-AlphaCom) Checkbox.png Checkbox.png
Audio Interface Customized IP Speaker Checkbox.png
Audio Interface Customized IP Speaker, answer in speaker Checkbox.png
I/O device Input device for receving alarms (dry contacts), 6 inputs Checkbox.png
I/O device Input device for receving alarms, 14 inputs Checkbox.png
I/O device Output device for operating relays, 1 relay Checkbox.png
I/O device Output device for operating relays, 2 relays Checkbox.png Checkbox.png
I/O device Output device for operating relays, 4 relays * Checkbox.png Checkbox.png Checkbox.png
I/O device Output device for operating relays, 9 relays Checkbox.png


* When using the TKIE kit, 4 relays are achieved by combining the TKIE kit with the TA-10 module.
*** Four inputs can be combined in a matrix function, providing 15 inputs/call buttons. This is supported in SIP mode and Edge mode only.