Actions

Kits - Comparison chart

From Zenitel Wiki

Revision as of 08:29, 4 October 2021 by Nikica (talk | contribs) (Application areas)
AEIS.png

Zenitel offers a number of IP based kits, which can be used for a wide range of applications. The kits are supported in all modes of operation (Edge, SIP and ICX-AlphaCom).

This article compares the properties and capabilities of the different kits, and indicates which kit is best fit for a certain application.

Kit offerings

TKIS-2 2.png TKIE.png TKIE-2.PNG TKIE.png IP-LCM 1.jpg TKIV+.jpg
TKIS-2 TKIE-1 TKIE-2 TKIE-3 IP-LCM TKIV+


Properties and capabilities

Kit General Audio out Audio In I/Os Accessories Support for:
Name Item no. Housing Ethernet ports Loudspeaker output Line Out (0 dBm) Additional speaker Microphone Line In Relays Digital I/Os Inputs as key matrix Handset Headset Keyboard LCD Display DAK48 module Camera
TKIS-2 1008131020 Plastic 1 10W Yes No Electret mic No 1 6 Yes *** No No No No No No
TKIE-1 1008132010 No 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes No No No No
TKIE-2 1008132020 Metal 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes No No No No
TKIE-3 1008132030 No 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes Yes No No No
IP-LCM 1008095201 Plastic 1 10W Yes No Electret mic No 8 + 1 8 + 6 Yes *** No No No No No No
TKIV+ 1008331010 Plastic 1 10W Yes No Electret mic No 1 6 Yes *** No No No No No Yes
IPMSK-V2 1008493000 No 2 1.5W No 5 W Electret mic No 1 3 inputs No Yes Yes Yes Yes Yes No


* Two more relays (4 in total) by using the TA-10 module in combination with the TKIE kit.
** LCD Display for Master kit: 1008099000
*** Four inputs can be combined in a matrix function, providing 15 different input signals. This is supported in SIP mode and Edge mode only.


Relay switching capacity:

  • TKIS and TKIE: 60 watt (max. 250VAC)
  • IP-LCM and TA-10: 8A (max. 250VAC)


Application areas

The table below shows which kit is best fit for a certain application. Please note that often several types of kits might be suitable for the same application.

Category Application TKIS-2 TKIE-1 TKIE-2 TKIE-3 IP-LCM TKIV+ IPMSK-V2
Substation Up to 6 call buttons *** Checkbox.png
Substation Up to 6 call buttons, camera Checkbox.png
Substation Up to 6 call buttons, handset Checkbox.png Checkbox.png
Substation Up to 6 call buttons, headset Checkbox.png Checkbox.png
Masterstation with full keypad Checkbox.png Checkbox.png
Masterstation with full keypad and LCD display Checkbox.png
Masterstation with full keypad, LCD display and support for DAK-48 module Checkbox.png
Audio Interface PA (Public Address) amplifer Checkbox.png
Audio Interface Mobile Radio system (ICX-AlphaCom) Checkbox.png Checkbox.png
Audio Interface Program Source (ICX-AlphaCom) Checkbox.png Checkbox.png
Audio Interface Customized IP Speaker Checkbox.png
Audio Interface Customized IP Speaker, answer in speaker Checkbox.png
I/O device Input device for receving alarms (dry contacts), 6 inputs Checkbox.png
I/O device Input device for receving alarms, 14 inputs Checkbox.png
I/O device Output device for operating relays, 1 relay Checkbox.png
I/O device Output device for operating relays, 2 relays Checkbox.png Checkbox.png
I/O device Output device for operating relays, 4 relays * Checkbox.png Checkbox.png Checkbox.png
I/O device Output device for operating relays, 9 relays Checkbox.png
* When using the TKIE kit, 4 relays are achieved by combining the TKIE kit with the TA-10 module.
*** Four inputs can be combined in a matrix function, providing 15 inputs/call buttons. This is supported in SIP mode and Edge mode only.