Actions

Kits - Comparison chart

From Zenitel Wiki

Revision as of 13:23, 24 October 2023 by Lennert.werf (talk | contribs)
AEIS.png

Zenitel offers a number of IP based kits, which can be used for a wide range of applications.

This article compares the properties and capabilities of the different kits, and indicates which kit is best fit for a certain application.

Kit offerings

ZMK-1angleRthumb.jpg TKIS-2 2.png TKIE.png TKIE-2.PNG TKIE.png IP-LCM 1.jpg TKIV+.jpg
ZMK-01 TKIS-2 TKIE-1 TKIE-2 TKIE-3CC IP-LCM TKIV+


Properties and capabilities

Kit General Audio out Audio In I/Os Accessories Support for:
Name Item no. Housing Ethernet ports Loudspeaker output Line Out (0 dBm) Additional speaker Microphone Line In Relays Digital I/Os Inputs as key matrix Handset Headset Keyboard LCD Display HDMI (touch)Display DAK48 module Camera USB-C HID
TKIS-2 1008131020 Plastic 1 10W Yes No Electret mic No 1 6 Yes *** No No No No No No No No
TKIE-1 1008132010 No 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes No No No No No No
TKIE-2 1008132020 Metal 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes No No No No No No
TKIE-3CC 1008132030 No 2 10W Yes No Electret mic Yes 2 * 6 Yes *** Yes Yes Yes No No No No No
IP-LCM 1008095201 Plastic 1 10W Yes No Electret mic No 8 + 1 8 + 6 Yes *** No No No No No No No No
TKIV+ 1008331010 Plastic 1 10W Yes No Electret mic No 1 6 Yes *** No No No No No No Yes No
IPMSK-V2 1008493000 No 2 1.5W No 5 W Electret mic No 1 3 inputs No Yes Yes Yes Yes No Yes No No
ZMK-01 1008493000 Metal 2 15W Yes No Electret mic Yes 1 2 inputs Yes Yes (USB-C) Yes (USB-C) Yes (USB-C) No Yes No Yes (USB-C) Yes


* Two more relays (4 in total) by using the TA-10 module in combination with the TKIE kit.
** LCD Display for Master kit: 1008099000
*** Four inputs can be combined in a matrix function, providing 15 different input signals. This is supported in SIP mode and Edge mode only.


Relay switching capacity:

  • TKIS and TKIE: 60 watt (max. 250VAC)
  • IP-LCM and TA-10: 8A (max. 250VAC)


Application areas

The table below shows which kit is best fit for a certain application. Please note that often several types of kits might be suitable for the same application.

Category Application TKIS-2 TKIE-1 TKIE-2 TKIE-3CC IP-LCM TKIV+ IPMSK-V2 ZMK-01
Substation Up to 6 call buttons *** Checkbox.png
Substation Up to 6 call buttons, camera Checkbox.png
Substation Up to 6 call buttons, handset Checkbox.png Checkbox.png
Substation Up to 6 call buttons, headset Checkbox.png Checkbox.png
Substation (Touch)Display, camera Checkbox.png
Masterstation with full keypad Checkbox.png Checkbox.png
Masterstation with full keypad and LCD display Checkbox.png
Masterstation with full keypad, LCD display and support for DAK-48 module Checkbox.png
Audio Interface PA (Public Address) amplifer Checkbox.png
Audio Interface Mobile Radio system (ICX-AlphaCom) Checkbox.png Checkbox.png
Audio Interface Program Source (ICX-AlphaCom) Checkbox.png Checkbox.png
Audio Interface Customized IP Speaker Checkbox.png
Audio Interface Customized IP Speaker, answer in speaker Checkbox.png
I/O device Input device for receving alarms (dry contacts), 6 inputs Checkbox.png
I/O device Input device for receving alarms, 14 inputs Checkbox.png
I/O device Output device for operating relays, 1 relay Checkbox.png
I/O device Output device for operating relays, 2 relays Checkbox.png Checkbox.png
I/O device Output device for operating relays, 4 relays * Checkbox.png Checkbox.png Checkbox.png
I/O device Output device for operating relays, 9 relays Checkbox.png
* When using the TKIE kit, 4 relays are achieved by combining the TKIE kit with the TA-10 module.
*** Four inputs can be combined in a matrix function, providing 15 inputs/call buttons. This is supported in SIP mode and Edge mode only.