Actions

ICX 1.2.3.X - Release Notes

From Zenitel Wiki

Revision as of 11:18, 13 November 2023 by Asle (talk | contribs) (→‎ICX 1.2.3.9)

Previous Release - ICX 1.1.3.X - Release Notes

This article provides the release notes for ICX-500 and ICX-Core software 1.2.3.x with incremental bug fix releases. The release notes for ICX 1.2 describe new features, improvements and issues fixed after ICX 1.1.

Contents

General information

VSF-ICX-500 is a firmware archive for the ICX-500 Intelligent Gateway platform.

  • vsfx-1.2.3.x{-n}.swu - Used for standard in-field upgrades
  • vsfx-prod-1.2.3.x{n}.img.zip - Used in-field recovery and major system upgrades (SD-Card update)
  • vsfx-prod-1.2.3.x{n}.zip - Used in production upgrade only.
Note icon
  • The first 4 numbers in version directly links to the the ICX-Core version.
  • The last optional "-n" number is added for vsfx build with only platform changes form the first ICX-Core build for vsfx.''


ICX-Core software is an "apt" installation package for Ubuntu 18.04.x LTS Server containing the same functional capabilities as the ICX-500 Intelligent Gateway platform.

  • ICX-Core-01.00-bionic-1.2.3.X.apt.tar - Used for installation from the Ubuntu shell or from ICX-Web on already running ICX-Core systems.

Software Upgrade information


ICX 1.2.3.10

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.10
Date: 13.11.2023
Status: General Availability

Bug fixes

MTN-3950 Fixed the web page refresh issue.

Fixed the problem when refreshing the page, it now correctly refreshes to the same tab. Tabs now keep track of the active side menu item and will open it if you switch tabs.

MTN-4120 Fixed issue where logs accumulated

MTN-4147 Fixed issue where RTP details were not visible in Alphaweb

MTN-4168 Fixed SNMP Trap issue

MTN-4180 Fix recorder disconnect issue

MTN-4183 Fixed issues with adding billing trunks

MTN-4190 Fixed issues with sending logs by mail

MTN-4216 Fixed an issue with no audio in second record on dual recording



ICX 1.2.3.9

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.9
Date: 04.05.2023
Status: General Availability

Note icon If you are upgrading the virtual ICX-AlphaCom Core 1.2.3.7 or below, you must add the php8.1 repository prior to upgrade. To add the php8.1 repository, from the linux console enter the following command.
sudo add-apt-repository ppa:ondrej/php



Bug fixes

MTN-4055 Fixed issue with fingerprint file

MTN-4098 SD-Card message storage correctly mounted on reboot

MTN-4108 Fixed issues where missing version causes IPHA warning

MTN-4111 Fixed issue where recorder re-invite stops SIP to SIP call

MTN-4120 Fixed issue where logs accumulated


Security fixes and improvements

MTN-4080 Fixed vulnerability in Billing solution


ICX 1.2.3.8

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.8
Date: 07.02.2023
Status: General Availability

Note icon If you are upgrading from ICX-AlphaCom Core 1.2.3.7 or below, you must add the php8.1 repository prior to upgrade. To add the php8.1 repository, from the linux console enter the following command.
sudo add-apt-repository ppa:ondrej/php



Bug fixes

MTN-3913 Support SNMP GET and Walk for nodeState

MTN-3925 Fixed wrong active I/O reported on station startup

MTN-3976 Fixed issue where SIP station hangs if disconnected when queued in ringing group

Security fixes and improvements

MTN-4041 Updated Linux kernel and libraries


ICX 1.2.3.7

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.7
Date: 18.11.2022
Status: General Availability

Bug fixes

MTN-2675 Node Name not Updated

The "Node name" should now be updated according to the name configured in AlphaPro

MTN-3725 Fixed an issue where time was set in wrong 12/24 hour format

MTN-3802 Removed deprecated quick edit mode

MTN-3808 Suppressed RTPD busy syslog messages

MTN-3812 Fixed issue with 12/24 hour clock when setting time

MTN-3842 Fixed issue for synchronization of state data between IPHA nodes

MTN-3927 Fixed issue with hanging SIP calls when SIP device disconnects unexpectedly

MTN-3932 Fixed issue where NTP server did not work after a reboot

MTN-3938 Fixed an issue where reconnecting network adapters at the same time caused IPHA collision

MTN-3942 Fixed an issue where 16 character node name sent from Alphapro caused reset

MTN-3953 Fixed issue where Alphacom replied to wrong SIP port on CANCEL-request if alternative port is used




ICX 1.2.3.6

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.6
Date: 28.06.2022
Status: General Availability

Bug fixes

MTN-3804 ICX-Core: Default gateway is now saved after installation script is run on a VM

MTN-3811 Fix issue where IPHA lost operational IP on cable hot swapping.


Security fixes and improvements

MTN-3836 Added new function $SMALL_RESET to simulate small reset sent from web

Will send proper shutdown signal and trigger system status messages, improvement on $RESET implementation.

MTN-3837 Added ZAP port in web firewall settings


ICX 1.2.3.5

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.5
Date: 04.05.2022
Status: General Availability

Bug fixes

MTN-3704 Fixed issue where noise was introduced after a voice message stopped playing

When a prerecorded voice message played there sometimes was a noticeable pop noise at the end of the playback.

MTN-3737 All ENA amplifiers now take the correct ENA license

The ENA amplifiers ENA-2200, ENA-2200-AC2 and ENA-2400-AC2 did not take the "ENA Amplifier" license.

MTN-3740 Fixed audio recording issue with outbound calls to SIP Trunk

MTN-3753 Fixed ICX-Core VM install script failure issue

An error message was displayed at the end of the installation of the ICX-Core software.

MTN-3770 When updating firmware on a registered device, the Noise Reduction value will now be kept

In previous versions the Noise Reduction would be disabled (the value set to 0 in the ICX-AlphaCom server) after firmware update of a device. This could be perceived as different audio quality after an upgrade of the device. This is now fixed, and the Noise Reduction value is kept in ICX-AlphaCom server after upgrading the firmware of a device.


ICX 1.2.3.4

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.4
Date: 08.03.2022
Status: General Availability

Bug fixes

MTN-3519 IPHA Did not Trigger Subevent 231 on Small/Chilly Reset

MTN-3614 Force gratuitous ARP on IPHA takeover

MTN-3622 Fixed issue with missing SIP "From" field to Recorder

The Recorder would show originating station as a question mark (?). This is now fixed.

MTN-3655 Resolved an Issue Causing IPHA Conflict on Takeover


ICX 1.2.3.3

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.3
Date: 26.11.2021
Status: General Availability

Security fixes and improvements

MTN-3575 Production update, no impact on the functionality



ICX 1.2.3.2

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.2
Date: 26.11.2021
Status: General Availability

Security fixes and improvements

MTN-3575 Production update, no impact on the functionality


ICX 1.2.3.1

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.1
Date: 26.11.2021

Security fixes and improvements

MTN-3574 Production update, no impact on the functionality


ICX 1.2.3.0

Release info

Name: VSF-ICX-500 and ICX-Core
ICX Version: 1.2.3.0
Date: 19.11.2021
Status: General Availability

Bug fixes

MTN-2971 Updated JQuery library for security hardening

MTN-3047 Expand SIP trunk to SIP trunk digit limit from 7 to 16 digits

MTN-3175 Fixed issue with scripter SSH access

Will now also sync web user credentials with Linux credentials for script users

MTN-3246 Fixed NTP Get Time issue

MTN-3297 Expand SIP numbers from 16 digits to 24 digits

MTN-3371 NTP no longer uses mode 0 to send initial request

MTN-3382 Improved handling of logs for better flash utilization

MTN-3392 Corrected ENA-2200AC now ENA license issue

MTN-3396 $ALRM to single station now correctly triggers volume override

MTN-3414 Hanging SIP Station in Ringing group After Lost Connection

Fixed issue causing a disconnected SIP station in a ringing group call to hang.

MTN-3431 Support for SNMP walk nodeState

MTN-3505 Fixed issue where billing with PIN code did not work as expected



Security fixes and improvements

MTN-2984 Setting Unreachable NTP Server is now Possible

It should now be possible to set an unreachable NTP server if needed for offline configuration.

MTN-3441 Support for Custom SNMPTrap Community String


Retrieved from "https://wiki.zenitel.com/w/index.php?title=ICX_1.2.3.X_-_Release_Notes&oldid=235068"