Configuration of the ZDD-1 (used with ICX-AlphaCom)

ZDD-1

This article describes how to configure the Zenitel Display Door intercom (ZDD-1) when used in an ICX-AlphaCom system. The ZDD-1 must be configured in SIP mode, and a SIP account must be created in the ICX-AlphaCom.

License requirement

When using the Zenitel Display Door intercom (ZDD-1) in an ICX-AlphaCom system a SIP Station license ILS-SIP is required for the ZDD-1.

Configuration

Create a SIP Account in ICX-AlphaCom

Use AlphaPro to create a SIP Account in the ICX-AlphaCom

Configuration of the ZDD-1

Log on to the device
Main Settings: Go to Main > Main Settings and set "Mode" = SIP. Enter the IP Settings for the device.
Account Settings: Select SIP Configuration > Account/Call and enter as a minimum Display Name, Directory Number, Server Domain and Authentication User Name.
GUI and Display configuration

Door Opening Feature

During a conversation between ZDD-1 and a master station, the master station operator can activate the Door Opening feature in the AlphaCom by pressing digit 6.

The Door Opening feature is programmed in the Event Handler. When Akuvox R29S is involved, an event must be created to send the DTMF signal. By default, Akuvox R29S uses sign "#" to activate Relay A, digit "2" to activate Relay B and digit "3" to activate Relay C.

In AlphaPro, open Users & Stations, select the ZDD-1 and press Events. In the Events window press Insert and create the following event

Door Opening event for Akuvox R29S

Event Owner:	The Akuvox R29S
Event type:	2 – Door Opening - During Conversation
Subevent:	0
When change to:	ON or OFF
When related to:	All
Action:	IF %chg(1,0) $D2S L146 B 1 stop endif $D2S L146 B 0

When digit 6 is pressed on the master station, the symbol "#" will be sent to the Akuvox R29S and will activate Relay A.

In action D2S, parameter 1 can have the following values to represent a digit:
0-9 = DTMF tones 0-9
A and B = '*' and '#'

Additional info

When the ZDD-1 is used with an ICX-AlphaCom system two-way video is not supported. In this case only one-way video is supported; that is from ZDD-1 to the video enabled device (Such as ITSV-5). Video in the other direction is not supported.