Configuration of the ZDD-1 (used with ICX-AlphaCom)
From Zenitel Wiki
This article describes how to configure the Zenitel Display Door intercom (ZDD-1) when used in an ICX-AlphaCom system. The ZDD-1 must be configured in SIP mode, and a SIP account must be created in the ICX-AlphaCom.
License requirement
When using the Zenitel Display Door intercom (ZDD-1) in an ICX-AlphaCom system a SIP Station license ILS-SIP is required for the ZDD-1.
Configuration
Create a SIP Account in ICX-AlphaCom
- Use AlphaPro to create a SIP Account in the ICX-AlphaCom
Configuration of the ZDD-1
- Log on to the device
- Main Settings: Go to Main > Main Settings and set "Mode" = SIP. Enter the IP Settings for the device.
- Account Settings: Select SIP Configuration > Account/Call and enter as a minimum Display Name, Directory Number, Server Domain and Authentication User Name.
- GUI and Display configuration
Door Opening Feature
During a call between ZDD-1 and a master station, the master station operator can activate the Door Opening feature in the ICX-AlphaCom by pressing digit 6.
The Door Opening feature is programmed in the Event Handler. An event must be created to send the digit "6" as a DTMF signal to the ZDD-1.
In AlphaPro, open Users & Stations, select the ZDD-1 and press Events. In the Events window press Insert and create the following event:
| Event Owner: | The Akuvox R29S |
| Event type: | 2 – Door Opening - During Conversation |
| Subevent: | 0 |
| When change to: | ON or OFF |
| When related to: | All |
| Action: | IF %chg(1,0) $D2S L146 B 1 stop endif $D2S L146 B 0 |
When digit 6 is pressed on the master station, the symbol "#" will be sent to the Akuvox R29S and will activate Relay A.
|
In action D2S, parameter 1 can have the following values to represent a digit: 0-9 = DTMF tones 0-9 A and B = '*' and '#' |
Additional info
|
|
When the ZDD-1 is used with an ICX-AlphaCom system two-way video is not supported. In this case only one-way video is supported; that is from ZDD-1 to the video enabled device (Such as ITSV-5). Video in the other direction is not supported. |