PA activation, one-step

Feature:	ReCall and Pre stored PA activation with one-step dialing. See also PA activation, multi-step
Default directory number:	9084 - 9088 (Group 1 - 5 as ReCall)
Feature number:	113
Parameter 1:	Group Call number (use bit in parameter 2 to define local or global)
Parameter 2:	Behaviour bitmap, default all bits = 0 . See below
Parameter 3:	Voice Alarm Message number. (Default 0 = ReCall) If different from 0, message played is Message Group 30 + param 2 Example, Param3 = 1 will play the file in "/opt/voice/svp_030_001.wav", param3 = 33 will play "/opt/voice/svp_030_033.wav"
Description:	Dispatch message as a Group Call to global or local group. The dispatched message can either be a pre-Stored Voice Message or a message recorded live (Recall). The function is activated with one single directory number.

Autoloaded directory numbers

Dirno	DisplayText	Feature	Parm1	Parm2	Parm3	Description
9084	ReCall Grp 1	113	1	0	0	Activate ReCallGroupCall to group 1 (84)
9085	ReCall Grp 2	113	2	0	0	2
9086	ReCall Grp 3	113	3	0	0	3
9087	ReCall Grp 4	113	4	0	0	4
9088	ReCall Grp 5	113	5	0	0	5
9101	ReCall GlobGr1	113	1	256	0	Activate ReCall global group call 1 (9001)
9184	MsgToGroup1	113	1	0	1	Activate announcement message 1 (8191) to local group 1 (84)

ReCall user interface

ReCall is a function to record a voice message from the station, and then dispatch the recorded message as a Group Call. The recorded message is a temporary message, which is discarded when the Group Call is finished.

1. Dial access number to group (or 765 + <destination> + M-key)
2. message recording. Choice of (possibly several times):
   • Pres M (* on phone) to record message.
     • If M is pressed again, recording is restarted
   • Release M (# on phone ) Recording stops, message is played back to user
   • C / on-hook to confirm and dispatch message. Return to Idle. Messages shorter than 0.5 seconds are discarded.
   • 8 to confirm and dispatch message, stay active to hear the message being broadcasted
   • 0 delete recording, cancel
   • 7 to hear the message once again

Simplest sequence is then:

1. Dial access number to group
2. M-pres
3. record message
4. M-release
5. C-pres / on-hook to dispatch.

With “AutoM” and "CHookDispatch" flags

Simplified, but less flexible user inferface if “AutoM” and "CHookDispatch" flags are set. (set Param 2 = 544).

• No waiting for initial M-press / '*'. Recording starts right away.
• '#' or '7' must then be used to stop recording and do pre-listen. Otherwise same as normal mode. M-Pres is required restart a recording.
• 0 to delete recording, cancel

Simplest sequence is then:

1. Dial access number to group
2. record message
3. C-pres / on-hook to dispatch.

PA control bitmap

Param2 is used as a control bitmap. Also used in Param1 of PA activation, multi-step.

BitNo	Weight	Value	Name	Description	Recall	Prestored
0	1	GoGroupCall	0	After the SVP message playback ends the group is disconnected and the initiator station goes back to idle (if not bit 4:1)(default).	Y	Y
			1	After the SVP message playback ends, the group and initiator station proceed to normal Group Call mode. (Use M-key and talk into the group, VP timer will start for use as group call "meet me" reply time out. Can be used replace the Gong with a custom SVP message for normal groupcall.)
1	2	DiscPlayback	0	Initiator Station is allowed to disconnect during message playback without stopping the message to the group.(default).	Y	Y
			1	If initiator station disconnect during the playout to group, the message is terminated immediately
2	4	MeetMe	0	"Meet me" (99) is not working and will not affect the SVP message or initiator station during SVP play (default). (If BIT0:1 "meet me" can be used after svp play finished)	Y	Y
			1	"Meet me" during SVP play will disconnect the SVP message and establish connection to initiator. If initiator is disconnected due to AutoDisconnect or CHookDispatch "Meet me" will not work.
3	8	AutoDisconnect	0	Initiator station listen to the SVP message together with the rest of the group (Default).	Y	Y
			1	Initiator station disconnect automatic before gong and SVP message start to play. For Recall it means that 8 dispatches the message, while the initiator is disconnected. ( No "meet me" function, group access level is not checked, event handler "conversation outgoing" is related to station 1. Same behaviour as $GROUP_MSG.)
4	16	reserved	0			Y
			1	Not implemented! Idea: Prestored SVP message followed by recall message
5	32	CHookDispatch	0	C key or On Hook cancel ReCall setup (Default)	Y
			1	C key or On Hook dispatch the ReCall message
6	64	LoopEndless	0	SVP message play once (Default)		Y
			1	Only if DiscPlayback = 1: SVP message is endless repeated
7	128	NoGong	0	Use default group gong (Default)	Y	Y
			1	No gong
8	256	GlobalGroup	0	Local Group call	Y	Y
			1	Global Group call
9	512	AutoM	0	Manuel M-key use	Y
			1	Auto M-key, Use in combination with CHookDispatch=1. (implemented 10.61.1.4) May be used alone from SIP or telephone: Pres # to end recording, 8 to dispatch.

Event reporting

Conversation_Outgoing_(Event_Type)

For Recall, Conversation-Outgoing is reported ON when entering recording-mode. For both Recall and Prestored PA, Conversation Outgoing is reported OFF when message playback to group is finished.

Related-to is the feature number.

Voice Paging (Event Type)

Is reported during playback to group of the message, both for recall and prestored messages.

Back to feature list