Actions

Difference between revisions of "Audio (Event Type)"

From Zenitel Wiki

(→‎Sub-Event 14 - Always)
 
(48 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
[[Image:AlphaPro Audio Event subevents.jpg|thumb|Sub-event flags in the Audio Event]]  
+
{{AI}}
−
The '''Audio''' event is intended for PA control or mobile radio keying, that is, as an extension to the audio function of the 'owner' station. Normally the action for this event is the operation of a [[RCO]]. The Audio event is divided into a number of sub-events, which are closely related to each other, and which can be combined to operate the same RCO. [[UDP group]]s cannot be used with Audio events. Audio events are not associated with a  "When Related to" number. In [[AlphaPro]] the sub-events can be selected after clicking the 'Details'-button.  
+
[[Image:AlphaPro Audio Event subevents.jpg|thumb|300px|Sub-event flags in the Audio Event]]  
 +
The '''Audio''' event is intended for PA control or mobile radio keying, that is, as an extension to the audio function of the 'owner' station. Normally the action for this event is the operation of a [[RCO]]. The Audio event is divided into a number of sub-events, which are closely related to each other, and which can be combined to operate the same RCO. [[UDP group]]s cannot be used with Audio events. Audio events are not associated with a  "When Related to" number. In [[AlphaPro]] the sub-events can be selected after clicking the ''''Details''''-button.  
  
−
The sub-events flags are devided in two groups. One group of flags is related to point-to-point conversations:
+
The sub-events flags are devided in two groups. Flags related to point-to-point conversations:
−
* Always
+
:* Always
−
* Incoming Calls
+
:* Incoming Calls
−
* Private Ringing
+
:* Private Ringing
−
* Never
+
:* Never
 +
Only one of these flags can be enabled at a time.
  
 
The other group of sub-event flags are related to "other" types of audio:
 
The other group of sub-event flags are related to "other" types of audio:
−
* Voice Paging (i.e. reception of group call or all call)
+
:* Voice Paging (i.e. reception of group call or all call)
−
* Audio Program/Alarm Distribution (i.e. listening to audio from the audio program channel or from the [[ASVP]] board)
+
:* Audio Program/Alarm Distribution (i.e. listening to audio from the audio program channel or an [[Start_Alarm_message_at_station_feature|alarm messages]] from the [[ASVP]] board)
−
* Program Conference (i.e. listening to [[Simplex Conference]])
+
:* Program Conference (i.e. listening to [[Simplex Conference]])
 +
Any combination of these flags can be enabled simultanously.
  
−
 
+
== Always (sub-event 14)==
−
== Sub-Event 14 - Always ==
 
 
This event is triggered on both incoming and outgoing calls.
 
This event is triggered on both incoming and outgoing calls.
 
{|  
 
{|  
 
|-
 
|-
−
|width="100pt"|'''Event Owner''':
+
|width="170pt"|'''Event Owner''':
−
|width="300pt"| A station (normally a [[FBSAR|PA Interface]])
+
|width="400pt"| A station (normally a [[FBSAR|PA Interface]])
 
|-
 
|-
 
|'''Event type''': || 01 – Audio
 
|'''Event type''': || 01 – Audio
Line 25: Line 27:
 
|'''Subevent''': || 14 (Always)
 
|'''Subevent''': || 14 (Always)
 
|-
 
|-
−
|'''When change to ON''': || Simplex listen:
+
|valign="top" |'''When change to ON''': || - Simplex listen:
 
: - The other station pressing M-key, or
 
: - The other station pressing M-key, or
 
: - Release own M-key<br>
 
: - Release own M-key<br>
Line 32: Line 34:
 
- Voice message (ASVP)
 
- Voice message (ASVP)
 
|-
 
|-
−
|'''When change to OFF''': || When the "microphone alive" LED of the station goes OFF
+
|'''When change to OFF''': || When Simplex listen or the tones stop
 
|-
 
|-
 
|'''When related to''': || N/A
 
|'''When related to''': || N/A
 
|-
 
|-
 
|}
 
|}
−
<br><br><br>
+
<br>
 +
'''Additional notes:'''
 +
* The station state must be Handset On or Volume/Handset Override
 +
 
 +
== Incoming Calls (sub-event 12) ==
 +
 
 +
This event is triggered on incoming calls only
  
−
{| border="1" cellpadding="4"
+
{|  
−
! align="left"|[[Event Owner]]:
 
−
| A station (normally a [[FBSAR|PA Interface]])
 
 
|-
 
|-
−
! align="left"|[[Event Handler#Events Types - Grouped by Function|Event type]]:
+
|width="170pt"|'''Event Owner''':
−
| 1 - Audio
+
|width="400pt"| A station (normally a [[FBSAR|PA Interface]])
 
|-
 
|-
−
! align="left"|[[Sub-Event (Event Handler)|Sub-Event]]:
+
|'''Event type''': || 01 – Audio
−
| 14 (Always)
 
 
|-
 
|-
−
! align="left"|[[When Change to (Event Handler)|When Change to ON]]:  
+
|'''Subevent''': || Incoming Calls (12)
−
|Simplex listen
+
|-
 +
|valign="top" |'''When change to ON''': || - Incoming Simplex listen:
 
: - The other station pressing M-key, or
 
: - The other station pressing M-key, or
 
: - Release own M-key<br>
 
: - Release own M-key<br>
−
Tones (connect- and disconnect-tones, private ringing etc)<br>
+
- Tones (connect- and disconnect-tones, private ringing etc.)<br>
−
Sending gong (this station makes a group call)<br>
 
−
Voice message
 
 
|-
 
|-
−
! align="left"|[[When Change to (Event Handler)|When Change to OFF]]:  
+
|'''When change to OFF''': || When Simplex listen or the tones stop
−
|When Simplex listen or the tones stop
 
 
|-
 
|-
−
! align="left"|[[When Related to (Event Handler)|When Related to]]:
+
|'''When related to''': || N/A
−
|N/A
 
 
|-
 
|-
 
|}
 
|}
  
−
== Sub-Event 12 - Incoming Call==
+
'''Additional notes:'''
 +
* The station state must be Handset On or Volume/Handset Override
 +
* The event is reported OFF (and stays OFF) if the user touches any key or the handset. This is called “take down” intended to transfer an incoming call from an external RCO-controlled speaker to the station’s internal speaker when the user touches any key or the handset.
 +
<br><br>
 +
 
 +
== Private Ringing (sub-event 08) ==
 +
 
 +
The event is triggered on incoming calls only
 +
{|
 +
|-
 +
|width="170pt"|'''Event Owner''':
 +
|width="400pt"| A station
 +
|-
 +
|'''Event type''': || 01 – Audio
 +
|-
 +
|'''Subevent''': || Private Ringing (08)
 +
|-
 +
|valign="top" |'''When change to ON''': || Incoming private ringing tone
 +
|-
 +
|'''When change to OFF''': || When the private ringing tone stops
 +
|-
 +
|'''When related to''': || N/A
 +
|-
 +
|}
 +
<br>
  
−
This event is triggered on incoming calls only
+
'''Additional notes:'''
 +
* The station state must be Handset On or Volume/Handset Override
 +
* This event is goes ON and OFF with the ringing signal, i.e. ON for 1,5 sec then OFF for 1,5 sec. The event goes OFF when private ringing stops.
 +
* See also event [[Private_Ringing_mode_%28Event_Type%29|"09 - Private Ringing Mode"]]
 +
<br>
  
 +
== Voice Paging (Group Call) (sub-event 16) ==
  
 +
This event is triggered when receiving group call audio. It is also triggered during the ding-dong signal.
 
{|  
 
{|  
−
! align="left"|[[Event Owner]]:
 
−
| A station (normally a [[FBSAR|PA Interface]])
 
 
|-
 
|-
−
! align="left"|[[Event Handler#Events Types - Grouped by Function|Event type]]:  
+
|width="170pt"|'''Event Owner''':
−
| 1 - Audio
+
|width="400pt"| A station
 +
|-
 +
|'''Event type''': || 01 – Audio
 
|-
 
|-
−
! align="left"|[[Sub-Event (Event Handler)|Sub-Event]]:
+
|'''Subevent''': || Voice Paging (16)
−
| 12 (Incoming Call)
 
 
|-
 
|-
−
! align="left"|[[When Change to (Event Handler)|When Change to ON]]:  
+
|valign="top" |'''When change to ON''': || When receiving group call audio and ding-dong
−
|Simplex listen
 
−
: - The other station pressing M-key, or
 
−
: - Release own M-key<br>
 
−
Tones (connect- and disconnect-tones, private ringing etc)<br>
 
−
Sending gong (this station makes a group call)<br>
 
−
Voice message
 
 
|-
 
|-
−
! align="left"|[[When Change to (Event Handler)|When Change to OFF]]:  
+
|'''When change to OFF''': || When the group call audio is switched off
−
|When Simplex listen or the tones stop
 
 
|-
 
|-
−
! align="left"|[[When Related to (Event Handler)|When Related to]]:
+
|'''When related to''': || N/A
−
|N/A
 
 
|-
 
|-
 
|}
 
|}
 +
<br>
 +
 +
'''Additional notes:'''
 +
* The station state must be Handset On or Volume/Handset Override
 +
* This event goes ON and OFF with the M-key of the announcer.
 +
<br>
 +
 +
== Audio Program/Alarm Distribution (sub-event 32) ==
  
−
-----
+
This event is triggered when receiving audio from the audio program channel, or when receiving [[ASVP]] alarm message.
−
;[[Event Owner]]
+
{|
−
: A station (normally a [[FBSAR|PA Interface]])
+
|-
−
;[[Event Handler#Events Types - Grouped by Function|Event type]]:  
+
|width="170pt"|'''Event Owner''':
−
: 1 - Audio
+
|width="400pt"| A station
−
;[[Sub-Event (Event Handler)|Sub-Event]]:
+
|-
−
: 12 (Incoming Call)
+
|'''Event type''': || 01 – Audio
−
;[[When Change to (Event Handler)|When Change to ON]]
+
|-
−
:Simplex listen
+
|'''Subevent''': || Audio Program/Alarm Distribution (32)
−
:: - The other station pressing M-key, or
+
|-
−
: - Release own M-key<br>
+
|valign="top" |'''When change to ON''': || When receiving audio from the audio program channel, or when receiving [[ASVP]] alarm message
−
:Tones (connect- and disconnect-tones, private ringing etc)<br>
+
|-
−
:Sending gong (this station makes a group call)<br>
+
|'''When change to OFF''': || When the audio is switched off
−
:Voice message
+
|-
−
;[[When Change to (Event Handler)|When Change to OFF]]
+
|'''When related to''': || N/A
−
:When Simplex listen or the tones stop
+
|-
−
;[[When Related to (Event Handler)|When Related to]]:
+
|}
−
:N/A
+
<br>
−
----
+
'''Additional notes:'''
 +
* The station state must be Handset On or Volume/Handset Override
  
−
'''Additional notes:''' The event is reported OFF (and stays OFF) if the user touches any key or the handset. This is called “take down” intended to transfer an incoming call from an external RCO-controlled speaker to the station’s internal speaker when the user touches any key or the handset
+
== Program Conference (sub-event 64) ==
  
−
==Example==
+
This event is triggered when receiving audio from a [[Simplex conference]], i.e. another station feeds the conference with audio (M-key pressed or Default Speaker). The event is often used for keying of radio transmitter when interfacing mobile radio systems.
  
 +
{|
 +
|-
 +
|width="170pt"|'''Event Owner''':
 +
|width="400pt"|  A station (normally a [[FBSAR - Mobile radio interface|Mobile radio interface]])
 +
|-
 +
|'''Event type''': || 01 – Audio
 +
|-
 +
|'''Subevent''': || Program Conference (64)
 +
|-
 +
|valign="top" |'''When change to ON''': || When receiving audio from a Simplex Conference
 +
|-
 +
|'''When change to OFF''': || When the audio is switched off
 +
|-
 +
|'''When related to''': || N/A
 +
|-
 +
|}
 +
<br>
 +
'''Additional notes:'''
 +
* The station state must be Handset On or Volume/Handset Override
  
 +
[[Category:Public Address - Features and configuration]]
 
[[Category:Event Handler]]
 
[[Category:Event Handler]]
 +
[[Category:Event types]]

Latest revision as of 09:57, 4 October 2019

AI.png
Sub-event flags in the Audio Event

The Audio event is intended for PA control or mobile radio keying, that is, as an extension to the audio function of the 'owner' station. Normally the action for this event is the operation of a RCO. The Audio event is divided into a number of sub-events, which are closely related to each other, and which can be combined to operate the same RCO. UDP groups cannot be used with Audio events. Audio events are not associated with a "When Related to" number. In AlphaPro the sub-events can be selected after clicking the 'Details'-button.

The sub-events flags are devided in two groups. Flags related to point-to-point conversations:

  • Always
  • Incoming Calls
  • Private Ringing
  • Never

Only one of these flags can be enabled at a time.

The other group of sub-event flags are related to "other" types of audio:

  • Voice Paging (i.e. reception of group call or all call)
  • Audio Program/Alarm Distribution (i.e. listening to audio from the audio program channel or an alarm messages from the ASVP board)
  • Program Conference (i.e. listening to Simplex Conference)

Any combination of these flags can be enabled simultanously.

Always (sub-event 14)

This event is triggered on both incoming and outgoing calls.

Event Owner: A station (normally a PA Interface)
Event type: 01 – Audio
Subevent: 14 (Always)
When change to ON: - Simplex listen:
- The other station pressing M-key, or
- Release own M-key

- Tones (connect- and disconnect-tones, private ringing etc)
- Sending gong (this station makes a group call)
- Voice message (ASVP)

When change to OFF: When Simplex listen or the tones stop
When related to: N/A


Additional notes:

  • The station state must be Handset On or Volume/Handset Override

Incoming Calls (sub-event 12)

This event is triggered on incoming calls only

Event Owner: A station (normally a PA Interface)
Event type: 01 – Audio
Subevent: Incoming Calls (12)
When change to ON: - Incoming Simplex listen:
- The other station pressing M-key, or
- Release own M-key

- Tones (connect- and disconnect-tones, private ringing etc.)

When change to OFF: When Simplex listen or the tones stop
When related to: N/A

Additional notes:

  • The station state must be Handset On or Volume/Handset Override
  • The event is reported OFF (and stays OFF) if the user touches any key or the handset. This is called “take down” intended to transfer an incoming call from an external RCO-controlled speaker to the station’s internal speaker when the user touches any key or the handset.



Private Ringing (sub-event 08)

The event is triggered on incoming calls only

Event Owner: A station
Event type: 01 – Audio
Subevent: Private Ringing (08)
When change to ON: Incoming private ringing tone
When change to OFF: When the private ringing tone stops
When related to: N/A


Additional notes:

  • The station state must be Handset On or Volume/Handset Override
  • This event is goes ON and OFF with the ringing signal, i.e. ON for 1,5 sec then OFF for 1,5 sec. The event goes OFF when private ringing stops.
  • See also event "09 - Private Ringing Mode"


Voice Paging (Group Call) (sub-event 16)

This event is triggered when receiving group call audio. It is also triggered during the ding-dong signal.

Event Owner: A station
Event type: 01 – Audio
Subevent: Voice Paging (16)
When change to ON: When receiving group call audio and ding-dong
When change to OFF: When the group call audio is switched off
When related to: N/A


Additional notes:

  • The station state must be Handset On or Volume/Handset Override
  • This event goes ON and OFF with the M-key of the announcer.


Audio Program/Alarm Distribution (sub-event 32)

This event is triggered when receiving audio from the audio program channel, or when receiving ASVP alarm message.

Event Owner: A station
Event type: 01 – Audio
Subevent: Audio Program/Alarm Distribution (32)
When change to ON: When receiving audio from the audio program channel, or when receiving ASVP alarm message
When change to OFF: When the audio is switched off
When related to: N/A


Additional notes:

  • The station state must be Handset On or Volume/Handset Override

Program Conference (sub-event 64)

This event is triggered when receiving audio from a Simplex conference, i.e. another station feeds the conference with audio (M-key pressed or Default Speaker). The event is often used for keying of radio transmitter when interfacing mobile radio systems.

Event Owner: A station (normally a Mobile radio interface)
Event type: 01 – Audio
Subevent: Program Conference (64)
When change to ON: When receiving audio from a Simplex Conference
When change to OFF: When the audio is switched off
When related to: N/A


Additional notes:

  • The station state must be Handset On or Volume/Handset Override
Retrieved from "https://wiki.zenitel.com/w/index.php?title=Audio_(Event_Type)&oldid=211727"