Difference between revisions of "ELSIR-10C"
From Zenitel Wiki
(→Software Upgrade) |
|||
| Line 7: | Line 7: | ||
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | ||
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | * [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | ||
| − | * [[ | + | * [[SIP Intercom Configuration|SIP mode]] |
* [[IP Station Configuration - Pulse mode|Pulse mode]] | * [[IP Station Configuration - Pulse mode|Pulse mode]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
== Restore Factory Defaults and Software Upgrade == | == Restore Factory Defaults and Software Upgrade == | ||
Revision as of 16:32, 19 July 2017
Contents
Getting started
Configuration
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)