Difference between revisions of "ELSIR-10C"
From Zenitel Wiki
(→Connectors, Indicators and Dimensions) |
|||
| Line 1: | Line 1: | ||
| − | {{ | + | {{AEPS}}[[File:IP Ceiling Turbine.PNG|thumb|350px|Turbine IP Speaker<br>(102 3300 010)]] |
== Getting started == | == Getting started == | ||
* [[TKIS Connections|Connections]] | * [[TKIS Connections|Connections]] | ||
| Line 7: | Line 7: | ||
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure. | ||
* [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | * [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | ||
| + | * [[Adding station to existing system (Edge)|Edge mode]] | ||
* [[SIP Intercom Configuration|SIP mode]] | * [[SIP Intercom Configuration|SIP mode]] | ||
* [[IP Station Configuration - Pulse mode|Pulse mode]] | * [[IP Station Configuration - Pulse mode|Pulse mode]] | ||
Revision as of 17:12, 5 December 2019
Contents
Getting started
Configuration
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
Restore Factory Defaults and Software Upgrade
The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
The ELSIR-10C IP Speaker has a Turbine kit TKIS-2 inside.
Software Requirements
This station is fully supported as form AlphaCom version 11.2.3.7