Actions

Difference between revisions of "IP Desktop Station with Video Display - 1408001635"

From Zenitel Wiki

(Created page with "File:IP Desktop Station with Video Display.PNG This article provides a detailed step-by step guide to the configuration and programming of the STENTOFON IP Desktop Station w...")
 
(Restore Factory Defaults and Software Upgrade)
 
(207 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[File:IP Desktop Station with Video Display.PNG]]
+
{{obsolete}}
 +
{{AEIPS}}[[File:1408001635.jpg|thumb|300px|IP Desktop Station with Video Display - 1408001635]]
 +
This product can be replaced by [[ITSV-2]] or [[ITSV-3]]
  
This article provides a detailed step-by step guide to the configuration and programming of the STENTOFON IP Desktop Station with Video Display. Only the Video Display part is handled by this article. for ordinary IP Station configuration please see [[IP Station Configuration]].
+
== Getting Started ==
 +
* [[IP Video Desk Connections|Connecting the Intercom station]]
 +
*[[Display Setup Menu (IP Stations)|Configuration from Display Menu]]
  
==Login==
+
==Configuration==
The IP Video Display has an integrated web server which allows users to log in via a standard web browser. In order to login on the IP Video Display for the first time with its default settings, proceed as follows:
+
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. <br>
* Connect your PC with the switch.  
 
* Connect the LAN connector of the IP Desktop Station to the PoE-switch port.
 
* Make sure your PC is set in the same address range as the IP camera. Otherwise, there is no access to it.
 
The default setting has the address range 169.254.1.xxx. Assign your network connection an additional IP address (e.g. 169.254.1.90, net mask 255.255.255.0).  
 
  
The IP Video Display default IP address is 169.254.1.101.  
+
General configuration.
* Open a web browser
+
* [[IP Station Configuration - ICX-AlphaCom mode]]
* Enter the default IP 169.254.1.101 in the address bar.
+
* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
* Enter the user name (default: '''admin''')
+
* [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
* Enter the password (default: '''alphaadmin''')
+
* [[IP Station Configuration - Pulse mode]]
  
[[File:IPVideoDesk 1.PNG|left|500px]]
+
Station specific configuration for the IP Desktop Station with Video Display:
 +
* [[IP Desktop - Video Module Configuration]]
 +
 
 +
== Restore Factory Defaults and Software Upgrade ==
 +
* [[INCA Display Station Restore Factory Defaults|Reset the intercom station to factory default settings]]
 +
* [[IP Desk Video Display Factory Reset|Reset the Video Module to factory default settings]]
 +
* [[INCA Station Software upgrade|Upgrade via the station web interface]]
 +
* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 +
* [[Video Desktop Display module upgrade|Software Upgrade of the Video Module]]
 +
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 +
* [[:Category:INCA Release notes|Software Release Notes]]
 +
 
 +
== Connectors, Indicators and Dimensions ==
 +
*[[INCA Desk Station LED Indicators|LED Indications]]
 +
*[[IP Desk Dimensions & Mounting Instructions|Dimensions]]
 +
 
 +
== Accessories ==
 +
* [[Wall bracket for Desktop - 1008091100]]
 +
 
 +
== Software Requirements ==
 +
This station is fully supported as form AlphaCom version 11.2.3.4.
 +
 
 +
== Related information ==
 +
* [http://www.zenitel.com/product/ip-desktop-video-station-0 Additional Documentation on Zenitel.com]
 +
 
 +
[[Category: Discontinued Stations]]

Latest revision as of 09:25, 16 August 2022

Obsolete icon This product is discontinued!


AEIPS.png
IP Desktop Station with Video Display - 1408001635

This product can be replaced by ITSV-2 or ITSV-3

Getting Started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

General configuration.

Station specific configuration for the IP Desktop Station with Video Display:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 11.2.3.4.

Related information