Difference between revisions of "IP Hotline Station - 1008070010"
From Zenitel Wiki
(→Restore Factory Defaults and Software Upgrade) |
(→Configuration) |
||
| Line 9: | Line 9: | ||
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | ||
| − | *[[Adding station to existing system (Edge)|Edge mode]] | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | *[[SIP Intercom | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| − | *[[IP Station Configuration - Pulse mode|Pulse mode]] | + | * [[IP Station Configuration - Pulse mode|Pulse mode]] |
Station specific configuration for the IP Hotline Station: | Station specific configuration for the IP Hotline Station: | ||
Revision as of 14:41, 30 June 2022
Contents
Connections
Configuration
The IP Hotline can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.
Station specific configuration for the IP Hotline Station:
- Configuration of IP Hotline Station - AlphaCom mode
- Configuration of IP Hotline Station - Pulse and SIP mode
- Configuration of IP Hotline Station - Pulse and SIP mode
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Connectors, Indicators and Dimensions
Software Requirements
This station is fully supported as from AlphaCom version 11.2.3.11