Actions

Private mode

From Zenitel Wiki

Revision as of 12:27, 9 February 2023 by Asle (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
AI.png
State test of station private/open mode. "Always Open" flag was added in AMC software 12.3.x.x

When calls are made to a station in Private mode, the station will be ringing like a telephone, and the called user has to accept the call by pressing the M-key or lift the handset.

Private mode can be set:

  • By selecting "Private" mode on the station. On IP stations the C-button must be pressed for 3 seconds. Analog stations have a switch or a jumper on the circuit board to set the station in Private mode.
  • By enabling the Programable Open/Private in AlphaPro, then dial 7887 to set the station in Private mode.
  • By setting the "Always Private" flag in AlphaPro


Note: When using the feature Programable Open/Private, the current state (private or open) is stored in state data, thus will be removed during "chilly reset".


On IP stations the private mode is toggled by holding the C-key pressed in idle. Controlling private/open by C-key is disabled if:

  • The IP station is of hardware type without display, (I.e. no keyboard)
  • "Always Private" flag is set
  • "Always Open" flag is set

The use of C-key on IP station will simultaneously set both the state of "current programmed private mode" and "state of hardware switch".


Related articles