Actions

Difference between revisions of "Weather and Vandal Resistant IP Substation - 1008041100"

From Zenitel Wiki

(Specifications)
(Related information)
 
(60 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[image:Weather and Vandal Resistant IP Substation 100 8041 100.jpg|thumb|150px|]]
+
{{AEIPS}}
 +
[[image:80411 CC.PNG|right|175px|IP Substation, item 1008041100]]
  
== Features ==
+
===This product is '''Discontinued''' and replaced by [[IPVRS-1|1008041200 IP Vandal Resistant Substation]]===
* Designed to deliver CCoIP® - Critical Communication over IP
 
* Weather and vandal resistant
 
* One vandal proof direct call button
 
* Station electronics available as kit for custom design
 
* Superb audio quality through wide bandwidth codec and high quality, high output power amplifier
 
* Integrated Web server
 
* Remote software upgrade, configuration and monitoring
 
* Line monitoring
 
* Dual Ethernet ports for daisy chaining IP stations or connection of other IP devices
 
* Possible connection to external IP video camera
 
* One relay output for door lock control or flash strobe light etc.
 
* External call button option
 
  
== Description ==
+
== Connections ==
The STENTOFON Weather Resistant IP Substation is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance.
+
* [[IP Sub Connections|Intercom connections]]
 
 
Designed for CCoIP® the station offers a set of critical communication features such as integrated firewall, group call, call priority and override, to name just a few. This enables you to deliver instant, efficient and secure voice and data services in an IP environment.
 
 
 
The station provides superb wideband audio quality. If even higher audio volume is required, it is possible to interface the unit to an external power amplifier.
 
  
The station has one relay and one logical output. These outputs can, for instance, be used to open a door through a connected relay. The operation of the outputs is programmable and controlled by the AlphaCom E exchange.
+
==Configuration==
 +
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
 +
* [[IP Station Configuration - ICX-AlphaCom mode]]
 +
* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
 +
* [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
 +
* [[IP Station Configuration - Pulse mode]]
  
Further still, the station integrates into any AlphaCom E and upgraded AlphaCom solution, and is scalable from 2 to 1000’s of stations.
+
== Restore Factory Defaults and Software Upgrade ==
 +
* [[INCA Station Restore Factory Defaults|Reset to factory settings]]
 +
* [[INCA Station Software upgrade|Upgrade via the station web interface]]
 +
* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 +
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 +
* [[:Category:INCA Release notes|Software Release Notes]]
  
== Specifications ==
+
== Connectors, Indicators and Dimensions ==
[[Image:80411 - Specifications.PNG|800px|IP Sub 80411 Specifications]]
+
*[[INCA Substation Board Connectors|Board Connectors]]
 +
* [[INCA Substation LED Indicators|Station LED Indications]]
 +
* [[INCA Substation PCB LED Indicators|PCB LED Indications]]
 +
*[[IP Substation Dimensions & Mounting Instructions|Dimensions]]
  
== Connections ==
+
== Accessories ==
[[Image:IP substation connections.jpg|280px|right|IP Substation Connections]]
+
* [[Back box flush mount - 1008098100]]
There are four connectors on the IP substation board, P1-P4.
+
* [[Back box on wall mount - 1008098000]]
  
{|
+
== Software Requirements ==
|-
+
This station is fully supported as from AlphaCom version 10.20
|width="50pt" valign="top" |'''P1''':
 
|width="300pt"|RJ45 connector for LAN connection.
 
|-
 
| colspan="2" | The station can be powered from this connection if the line supports Power over Ethernet (PoE).
 
|-
 
| colspan="2" |  
 
|-
 
|valign="top"|'''P2''': || RJ45 connector for auxiliary LAN equipment like TV camera, PC or a second IP station.
 
|-
 
| colspan="2" | This port has not an individual IP address or power for aux equipment.
 
|-
 
| colspan="2" |  
 
|-
 
|'''P3''': || 6-pin plug-on screw terminal for external connections.
 
|-
 
|''Pin 1/2'': || Connect 24 VDC for station power if power is not distributed via LAN. Pin 1 is positive.
 
|-
 
|''Pin 3/4'': || Internal NO (Normal Open) relay contact for door lock control etc.
 
|-
 
|''Pin 5/6'': || Normally connected to station loudspeaker. May be used for 16-20 ohm/2 W external loudspeaker in parallel.
 
|-
 
| colspan="2" |  
 
|-
 
|'''P4''': || 6-pin plug-on screw terminal for internal connections.
 
|-
 
| ''Pin 1/4'': || Call button no. 1.
 
|-
 
| ''Pin 2/4'': || Call button no. 2 if included
 
|-
 
| ''Pin 3/4'': || Call button no. 3 if included
 
|-
 
| ''Pin 5/6'': || Station LED for call and message info.
 
|-
 
| colspan="2" |  
 
|-
 
| valign="top"|'''TP1/2''': || Optional external audio output.
 
|-
 
| colspan="2" | This is a 0 dB, 600 ohm balanced output for connection to a power amplifier. Note that the amplifier input MUST HAVE AN INSULATED INPUT (trafo, capacitors, etc.).
 
|-
 
|}
 
  
== Mounting ==
+
== Related information ==
*[[Back box on wall mount - 1008098000]]
+
* [http://www.zenitel.com/product/ip-vandal-resistant-substation-0 Additional Documentation on Zenitel.com]
*[[Back box flush mount - 1008098100]]
 
  
[[Category: Stations]]
+
[[Category: INCA Stations]]
[[Category: Vandal Resistant Stations]]
+
[[Category: Discontinued Stations]]
[[Category: IP Stations]]
 

Latest revision as of 13:31, 26 June 2023