Station Input or Station DAK key (Event Type)

When an Input or a DAK key on a station is activated, this is reported to the event handler, event 30.

Event description

Event Owner:	A station
Event type:	30 - Station Input or Station DAK key
Subevent:	Input or DAK key (1->)
When change to ON:	When Input or DAK key is activated
When change to OFF:	When Input or DAK key is released
When related to:	N/A

If Subevent is set to 255, all Inputs or DAK keys will be reported. One can use %sev to read the subevent number.

See also Inputs_from_IP_Stations/Devices

Application

Examples:

• IP substation call buttons as M- and C-key
• Delayed Call

Important note on Turbine Stations

On the Turbine series of intercom stations, the Subevent number depends on the AMC software version:

• AMC 11.2.3.9 and lower: Input 1-6 are reported as Subevent number 1 - 6
• AMC 11.2.3.10: Input 1-6 are reported as Subevent number 101 - 106
• AMC 11.2.3.11 and higher: Input 1-6 are reported as Subevent number 11 - 16

Additional information

• Only one DAK key can be ON at a time
• Multiple DAK's can be ON at the same time when using the inputs on connector P4 of the IP Substation, and when using the additional inputs on connector P4 of the IP Flush master station.

Subevents:

• IP substations:
  • Subevent 1: The standard call button
  • Subevent 2: Input 2
  • Subevent 3: Input 3

• Conventional substations:
  • Subevent 1: ID
  • Subevent 2: ID+M

See also: IP_Substation_-_Additional_DAK_keys

Software requirement

Minimum software requirement: AMC 10.03