Main Page

Welcome to AlphaWiki everything you need to know about STENTOFON AlphaCom. 1,960 articles in English

Software Hardware Features

AlphaNet MultiModule Event Handler

AlphaPro SIP Stations

Applications 3rd party integration Release notes

AlphaWiki User's Guide

All categories

AlphaCom XE The AlphaCom XE combines the best of the present advanced AlphaCom system with the latest IP, Linux and embedded networking technologies. When entering the IP world, no compromise has been made. The AlphaCom E provides the complete set of existing services, quality, reliability and security characteristics for which AlphaCom has always been recognized. Some of the special features it brings into the IP domain are wideband (7 kHz) audio, a built-in firewall, integrated Web and SIP server, and low latency switching. Several exchanges can be interconnected on AlphaNet over IP, as well as traditional methods, both locally and worldwide. All communication and services are available throughout the entire network. The AlphaCom XE Exchanges includes extended integration of different kinds of communication and alarm systems, access control, CCTV, public address, public telephones and a variety of features and solutions that can be added when desired. It is easy to interface to 3rd party systems to create special applications. The new technology allows remote programming, logging and maintenance via AlphaPro, Syslog and standard web browsers. What's new SOFTWARE The latest software versions are available on the download page IP Station version 02.03.3.1. New functions (since 02.02.3.1): General Enhancements: IPARIO now uses the same image as IP Desktop / Master / Sub Can now choose IGMP version Now possible to do factory reset from the web interface DHCP request option 12 and 81 is now used Now showing more network information in the station information screen The stations will now remember their last DHCP IP Address and request it during DHCP negotiation Stations can now continue to use last DHCP IP Address when the DHCP server fails to respond Enhancements in SIP mode: Added more SNMP GET information Added support for 3 parallel registrations and configurable serial registration Added support for DTMF Flash on Input Button Enhanced relay functionality Added option for increasing tone volume Added option to configure delay for setting up call (press input/dak button for X seconds) Enhancements in AlphaCom mode: Added support for using old handset in new 8023 hardware at the headset input Added support for tonetest in IP only environments Fixed several errors where sound could dissappear in conferences Fixed an error which caused multicast to dissappear when using IGMP snooping Note that the IP DualDisplay and the Turbine stations are using a different software than the rest of the IP stations. For a complete list of bug fixes and functional changes and enhancements, see IP Station release notes Upgrade the IP stations according to the IP Station upgrade procedure AMC-IP version 11.3.3.1b. News since 11.2.3.7: Built in DHCP-Server External DNS Server Support Built in NTP Server Changed and Improved IP Address Configuration in AlphaWeb Station Discovery and Assignment from AlphaWeb Dynamic Group Call Data Command $D2S for Sending Digit Signaling to SIP station Data Command for Display Update Event Handler Event if Recording Fails New Feature for Manual Activation of Recording During Conversation Report SX Conference Speaker to SysLog Statistic Priority Direct Paging with Feature 93 SIPd Reply to the "OPTION" Message SIPd Support of Delayed Offer IP Station Registration Changes IP-HA Enhancement, Part Of State Data Synchronized Backward Compatibility Flag for $EXT_MAIL For a complete list of bug fixes and functional changes and enhancements, see AMC-IP Release Notes Note 1: AMC 11.3.3.1 software cannot be used on the red AMC-IP boards Note 2: Prior to installing the AMC 11.3.3.1 software, the AMC-IP board must be upgraded to BSP version 30.02. How to upgrade: AMC-IP software upgrade procedure AlphaPro version 11.6.3.2. New features (since 11.5.3.4): SX conference flag: ON = Report current speaker to SysLog statistics. OFF = no statistics. Default OFF Station Flags: ON = Avoid increasing volume for Tone test (Station/user->Line monitoring menu) System flag: Recording on demand (System-> Recording) Event Handler Events: 38 - Dynamic group inclusion 39 - Additional call info 40 - Recording Event Various bug fixes and improvements NOTE: When installed for the first time, the Sentinel dongle driver must be installed separately. It is located in the \SentinelSystemDriver folder inside your AlphaPro installation directory. For a complete list of bug fixes and functional changes and enhancements, see AlphaPro release notes

AlphaPro AlphaPro is the programming tool for the AlphaCom exchange. AlphaPro gives the facility to program the features of the exchange off-line, and at a later stage download this programming into the exchange. AlphaPro does not extend the features of the exchange, it fills in the appropriate tables. AlphaPro gives the facility to program the features of the exchange off-line, and at a later stage upload this programming into the exchange. AlphaWeb The AlphaWeb is an embedded web server running on the AlphaCom E exchange. It allows the users to log in using a standard web browser such as Internet Explorer, Mozilla Firefox, Opera or Netscape to operate and manage the AlphaCom system. Event Handler The AlphaCom exchange is an intercom exchange of which the main task is to enable uni- and bi-directional speech. In order to be able to meet as many customer requirements as possible when it comes to special features an Event Handler has been implemented. The underlying idea is that by customer-programming this event handler functionality can be implemented which is not part of the standard feature list. The event handler is unique in the world of intercom. It is what gives the exchange its flexibility and makes it possible to meet most, if not all, customer requirements. The Event Handler is based on the software concept that when the intercom functions run, they report 'events' to a part of the software called the Event Handler. The event can be described as a trigger that sets off an action in the system depending on the information entered in AlphaPro, the programming tool for the AlphaCom exchange. In this way, the Event Handler provides a powerful engineering tool for configuring system behaviour to meet requirements from customers.