Difference between revisions of "TFIX-4"
From Zenitel Wiki
(→Configuration) |
|||
| Line 12: | Line 12: | ||
* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]] | ||
| − | *[[SIP Intercom | + | * [[Adding station to existing system (Edge)|Edge mode]] |
| − | *[[IP Station Configuration - Pulse mode|Pulse mode]] | + | * [[SIP Intercom - Web Interface|SIP mode]] |
| + | * [[IP Station Configuration - Pulse mode|Pulse mode]] | ||
{{note|TFIX-4 specific configuration: In the web interface of the station, select '''Product Model And Accessory''' <nowiki>=</nowiki> '''TFIX-1''' ("TFIX-4" is not an available option).}} | {{note|TFIX-4 specific configuration: In the web interface of the station, select '''Product Model And Accessory''' <nowiki>=</nowiki> '''TFIX-1''' ("TFIX-4" is not an available option).}} | ||
Revision as of 13:42, 30 June 2022
|
This product is discontinued! |
Contents
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
|
TFIX-4 specific configuration: In the web interface of the station, select Product Model And Accessory = TFIX-1 ("TFIX-4" is not an available option). |
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Flowire Software Upgrade Procedure