Actions

Difference between revisions of "IP Video Door Station - 1401110100"

From Zenitel Wiki

(→‎CP-Cam Factory Reset)
(→‎Restore Factory Defaults and Software Upgrade)
 
(112 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
[[File:IP Video Door Station.PNG|thumb|600px|IP Video Station, item 1401110100]]
+
{{Obsolete}}
 +
{{AEIPS}}
 +
[[File:IP Video Door Station.PNG|thumb|600px|IP Video Station with CP-CAM camera, item 1401110100]]
  
−
'''Camera Type: CP-Cam'''
+
== Connections ==
 +
* [[IP Video Doorstation Connections|Intercom connections]]
  
−
The STENTOFON Vandal Resistant '''IP Video Station''' (item 1401110100) is tough, durable and resilient, and designed for use in the harshest of environments. The station is typically used as a communication, information or emergency point and connects directly to the IP network making it easy to deploy – anywhere and at any distance. Designed for CCoIP® the station offers a set of critical communication features such as integrated firewall, group call, call priority and over-ride, to name just a few. This enables you to deliver instant, efficient and secure voice, video and data services in an IP environment.
+
==Configuration==
 +
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.  
  
−
==Installation==
+
General configuration:
−
See article: [[IP Station Installation]]
+
* [[IP Station Configuration - ICX-AlphaCom mode]]
 +
* [[Adding station to existing system (Edge)|IP Station Configuration - Edge mode]]
 +
* [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
 +
* [[IP Station Configuration - Pulse mode]]
  
−
==Station Board Connectors and LED Indications==
+
Station specific configuration:
−
See article: [[IP_Station_Board_Connections_and_Indications#1401110100.2F1401110100|IP Station Board Connections and Indications]]
+
* [[CP Cam Configuration]]
  
−
== IP Station Configuration ==
+
== Restore Factory Defaults and Software Upgrade ==
−
See article: [[IP_Station_Configuration#Configuration_in_IP-StationWeb|IP Station Configuration]]
+
* [[INCA Station Restore Factory Defaults|Factory reset of the intercom station]]
 +
* [[CP-Cam Factory Reset|Factory reset of the Camera Module]]
 +
* [[INCA Station Software upgrade|Upgrade via the station web interface]]
 +
* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 +
* CP Cam upgrade
 +
* [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 +
* [[:Category:INCA Release notes|Software Release Notes]]
  
−
==Reset to factory settings==
+
== Connectors, Indicators and Dimensions ==
−
See article: [[IP_Station_Restore_Factory_Defaults|IP Station Restore Factory Defaults]]
+
*[[INCA Video Doorstation Board Connectors|Board Connectors]]
 +
* [[INCA Video Doorstation LED Indicators|Station LED Indications]]
 +
* [[INCA Substation PCB LED Indicators|PCB LED Indications]]
 +
* [[IP Video Doorstation Dimensions & Mounting Instructions|Dimensions]]
  
−
==Software Upgrade==
+
== Accessories ==
−
See article: [[IP Station Software upgrade]]
+
* [[Back box flush mount - 1401199101]]
 +
* [[Back box on wall mount - 1401199111]]
 +
* [[Protection Roof - 1401199112]]
  
−
==Dimensions==
+
== Software Requirements ==
−
See article: [[IP_Stations_Dimensions_%26_Mounting_Instructions#IP_Video_Door_Station|IP Stations Dimensions and Mounting Instructions]]
+
This station is fully supported as form AlphaCom version 10.20
  
−
==Camera==
+
== Additional information ==
−
Connect to the camera using a webbrowser on default IP address 169.254.1.101.
+
* [http://www.zenitel.com/product/ip-vandal-resistant-video-intercom-station-w-cp-cam-camera Additional Documentation on Zenitel.com]
  
−
In the menu that appears, click '''System Settings''', and you will be asked to login:
 
  
−
Username: '''admin''' <br/>
+
[[Category: Discontinued Stations]]
−
Password: '''1234'''
+
[[Category:Video]]
−
 
 
−
 
 
−
==Compability==
 
−
This table descibes the camera specific settings that must be set depending on the receiver
 
−
{| border="1"
 
−
| align="center" style="background:#ffcb00;" width="200pt"|'''Receiving unit'''
 
−
| align="center" style="background:#ffcb00;" width="90pt"|'''Resolution'''
 
−
| align="center" style="background:#ffcb00;" width="90pt"|'''Frame Rate'''
 
−
| align="center" style="background:#ffcb00;" width="90pt"|'''Compression'''
 
−
| align="center" style="background:#ffcb00;" width="90pt"|'''Other2'''
 
−
| align="center" style="background:#ffcb00;" width="400pt" |'''Comments'''
 
−
|-
 
−
| [[IP Desktop Station with Video Display - 1408001635|IP Video Desktop]] ||align="center" | 320x240 ||align="center" | Unlimited ||align="center" | 30 ||align="center" | xx || yy
 
−
|-
 
−
| [[Cisco xxx]] ||align="center" | xx ||align="center" | xx ||align="center" | xx ||align="center" | xx || yy
 
−
|-
 
−
| [[SNOM IP Phone]] ||align="center" | xx ||align="center" | xx ||align="center" | xx ||align="center" | xx || yy
 
−
|-
 
−
| [[Grandstream xxx]] ||align="center" | xx ||align="center" | xx ||align="center" | xx ||align="center" | xx || yy
 
−
|-
 
−
| [[PhonerLite SIP Client]] ||align="center" | xx ||align="center" | xx ||align="center" | xx ||align="center" | xx || yy
 
−
|-
 
−
| [[DIVUS Videophone]] ||align="center" | xx ||align="center" | xx ||align="center" | xx ||align="center" | xx || yy
 
−
|-
 
−
|}
 
−
 
 
−
These units have been tested and found to be not supported:
 
−
* BRIA (CounterPath) SIP client
 
−
* CPCAM viewer
 
−
 
 
−
=Setup with STENTOFON Video Display Station=
 
−
To configure the STENTOFON Video Display Station please see: [[IP Desktop Station with Video Display - 1408001635]]
 
−
 
 
−
This chapter describes the steps for configuring the CP-Cam:
 
−
 
 
−
From the Main Menu select '''System Settings > Network'''
 
−
:1. Under section '''IP-SETUP''', set ''IP-SETUP Type'' to '''Manual'''
 
−
[[File:IP-VideoDoorStation1.png|left|thumb|500px]]
 
−
<br style="clear:both;" />
 
−
:2. Enter a static IP adresss, Netmask, Gateway and DNS
 
−
:3. Under section '''System''', set ''Authentication required for Picture/Video'' to '''No'''
 
−
[[File:IP-VideoDoorStation2.png|left|thumb|500px]]
 
−
<br style="clear:both;" />
 
−
:4. Click '''Save Changes''' at the bottom of the page
 
−
<br style="clear:both;" />
 
−
----
 
−
 
 
−
From the Main Menu select '''System Settings > Camera'''
 
−
:1. Under section '''Settings''', set ''Mode'' to '''Custom'''
 
−
:2. Set '''Res X''' to 320
 
−
:3. Set '''Res Y''' to 240
 
−
[[File:IP-VideoDoorStation3.png|left|thumb|500px]]
 
−
<br style="clear:both;" />
 
−
:4. Under section '''Settings''', set ''Frames per Second (Sensor)'' to '''15'''
 
−
[[File:IP-VideoDoorStation4.png|left|thumb|500px]]
 
−
<br style="clear:both;" />
 
−
 
 
−
 
 
−
 
 
−
[[Category: Stations]]
 
−
[[Category: IP Stations]]
 
−
[[Category: Vandal Resistant Stations]]
 
−
[[Category: Video]]
 

Latest revision as of 08:24, 16 August 2022

Obsolete icon This product is discontinued!


AEIPS.png
IP Video Station with CP-CAM camera, item 1401110100

Connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

General configuration:

Station specific configuration:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software Requirements

This station is fully supported as form AlphaCom version 10.20

Additional information

Retrieved from "https://wiki.zenitel.com/w/index.php?title=IP_Video_Door_Station_-_1401110100&oldid=230796"