ZMK-1: Difference between revisions
From Zenitel Wiki
Lennert.werf (talk | contribs) No edit summary |
No edit summary |
||
| (10 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
{{CES}}[[file:ZMK_image.jpg|thumb|550px|ZMK Kit (1008560101)|alt=]] | |||
The '''ZMK-1''' is the kit to build your own station with touch display. | The '''ZMK-1''' is the kit to build your own station with touch display. | ||
In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the [[Kits - Comparison chart|kit comparison chart]]. | In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the [[Kits - Comparison chart|kit comparison chart]]. | ||
| Line 8: | Line 9: | ||
==Configuration== | ==Configuration== | ||
The | The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to. | ||
* [[Adding station to existing system (Edge)|Edge mode]] | * [[Adding station to existing system (Edge)|Edge mode]] | ||
* [[SIP Intercom - Web Interface|SIP mode]] | * [[SIP Intercom - Web Interface|SIP mode]] | ||
{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}} | |||
Device specific configuration: | Device specific configuration: | ||
| Line 23: | Line 23: | ||
*[[IMT - Discover & Upgrade|Upgrade using the IMT tool]] | *[[IMT - Discover & Upgrade|Upgrade using the IMT tool]] | ||
*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]] | *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]] | ||
*[[ | *[[VSF-Display Series 9.0 Release Notes|Software Release Notes]] | ||
==Accessories== | ==Accessories== | ||
| Line 33: | Line 33: | ||
* Some cameras support providing 2 independent streams at the same time, for example one H.264 stream and one MJPEG stream which can be independently accessed. If in addition to primary stream, camera supports MJPEG output on a separate video device (secondary stream), we will use that stream as a source for HTTP MJPEG stream to achieve better performance. | * Some cameras support providing 2 independent streams at the same time, for example one H.264 stream and one MJPEG stream which can be independently accessed. If in addition to primary stream, camera supports MJPEG output on a separate video device (secondary stream), we will use that stream as a source for HTTP MJPEG stream to achieve better performance. | ||
* Exposed v4l2 controls for setting contrast, brightness and saturation. | * Exposed v4l2 controls for setting contrast, brightness and saturation. | ||
==Related Information== | ==Related Information== | ||
*[https://www.zenitel.com/product/ | *[https://www.zenitel.com/product/zmk-1-multi-purpose-ip-intercom-module Additional Documentation on Zenitel.com] | ||
[[Category: Turbine]] | [[Category: Turbine]] | ||
Latest revision as of 10:52, 6 January 2025
The ZMK-1 is the kit to build your own station with touch display. In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.
Getting started
Configuration
The device can operate in different modes. Set the mode according to the server the station should register to.
|
To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server. |
Device specific configuration:
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
- Software Release Notes
Accessories
Used USB cameras should support the following:
- Output format:
- 1080P 30 FPS RAW (the best option), or
- 1080P 30 FPS H264, and at least 480P 15FPS MJPEG or RAW on a separate stream.
- Some cameras support providing 2 independent streams at the same time, for example one H.264 stream and one MJPEG stream which can be independently accessed. If in addition to primary stream, camera supports MJPEG output on a separate video device (secondary stream), we will use that stream as a source for HTTP MJPEG stream to achieve better performance.
- Exposed v4l2 controls for setting contrast, brightness and saturation.