Difference between revisions of "ENA2100-AC Amplifier"
From Zenitel Wiki
(→SIP mode) |
|||
| (32 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | {{Obsolete}} |
| + | [[Category: Discontinued Stations]] | ||
| + | {{note|This product is replaced by the [[ENA2100-AC2 Amplifier]]}} | ||
| + | {{AIS}}[[File:ENA2100-AC-4.jpg|thumb|400px|ENA2100-AC amplifier (1023102100)|alt=]] | ||
The '''ENA2100-AC Amplifier''' is a 2 x 100 watt IP based amplifier that can register to the AlphaCom server over an IP network. | The '''ENA2100-AC Amplifier''' is a 2 x 100 watt IP based amplifier that can register to the AlphaCom server over an IP network. | ||
| Line 9: | Line 12: | ||
The amplifier’s control inputs/outputs and audio inputs can be used locally by the amplifier (e.g. for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music). | The amplifier’s control inputs/outputs and audio inputs can be used locally by the amplifier (e.g. for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music). | ||
| − | == Installation, | + | ==Installation, Indicators and Dimensions== |
| − | |||
| − | |||
| − | |||
| − | + | *[[ENA2100-AC Amplifier - Mounting and Installation|Mounting and Installation]] | |
| − | * [[ | + | *[[ENA2100-AC - Dimensions|Dimensions]] |
| − | * [[ | + | *[[ENA2100 Status LEDs|Status LEDs]] |
| − | |||
| − | * [[ | ||
| − | |||
| − | |||
| − | |||
| − | == Software Upgrade and Restore Factory Defaults == | + | ==Configuration== |
| + | ===AlphaCom mode=== | ||
| + | |||
| + | *[[ENA Amplifier - Basic configuration (AlphaCom mode)|Getting started (ICX-AlphaCom mode)]] | ||
| + | *[[ENA Configuration - AlphaCom mode|ICX-AlphaCom mode]] | ||
| + | *[[ENA Amplifier - Monitoring|Amplifier monitoring]] | ||
| + | *[[ENA Amplifier - Report faults to Display Station|Report amplifier faults to Display Station]] | ||
| + | *[[HD audio for background music distribution]] | ||
| + | *[[Distributed Automatic Volume Control (DAVC)]] | ||
| + | |||
| + | ===SIP mode=== | ||
| + | |||
| + | *[[ENA Amplifier - Basic configuration (SIP mode)|Getting Started (SIP mode)]] | ||
| + | * [[ENA Amplifier Configuration (SIP)|Web interface - SIP mode]] | ||
| + | *[[Distributed Automatic Volume Control (DAVC) (SIP)|Distributed Automatic Volume Control (DAVC) in SIP]] | ||
| + | |||
| + | ===Common Configuration=== | ||
| + | |||
| + | *[[ENA Amplifier - Calibrating the loudspeaker lines|Calibrating the loudspeaker lines]] | ||
| + | *[[ENA amplifier in Bypass Mode]] | ||
| + | *[[ENA2100 - One Channel Mode|One Channel Mode]] | ||
| + | |||
| + | ==Software Upgrade and Restore Factory Defaults== | ||
The ENA amplifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations. | The ENA amplifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations. | ||
| − | * [[Turbine Software Upgrade|Upgrade using the web interface of the amplifier]] | + | |
| − | * [[ | + | *[[Turbine Software Upgrade|Upgrade using the web interface of the amplifier]] |
| + | *[[IMT - Discover & Upgrade|Upgrade using the IMT tool]] | ||
Load Factory Default values: | Load Factory Default values: | ||
| − | |||
| − | |||
| − | == Accessories == | + | *Factory Default values can be loaded via the web interface of the amplifier, from the [[ENA_Configuration_-_AlphaCom_mode#Station_Administration_tab|Station Administration > Reboot]] menu |
| − | *[[ELTSI-1|ELTSI-1 Line End Transponder ]] | + | *Factory Reset Button: Insert a straightened paper clip or similar device into the hole - Wait 7 seconds after power-on, then push for 1 second and release. |
| + | |||
| + | ==Accessories== | ||
| + | |||
| + | *[[ENA2100-AC_Amplifier_-_Mounting_and_Installation#Mounting|Mounting Kits for single or double amplifiers in 19" rack]] | ||
| + | *[[ELTSI-1|ELTSI-1 Line End Transponder]] | ||
| − | == Related Information == | + | ==Related Information== |
| − | |||
| − | [ | + | *[https://www.zenitel.com/product/ena2100-AC Additional Documentation on Zenitel.com] |
Latest revision as of 11:36, 27 June 2024
|
This product is discontinued! |
|
This product is replaced by the ENA2100-AC2 Amplifier |
The ENA2100-AC Amplifier is a 2 x 100 watt IP based amplifier that can register to the AlphaCom server over an IP network.
The ENA2100-AC amplifier operates from a 115/230 VAC supply and is designed to survive minor interruptions to the power supply.
The amplifier has two separate loudspeaker channels. Each channel can be addressed separately, i.e. belong to two different zones, or the two channels can be combined into one channel.
The amplifier monitors the speaker lines for shorts, overload and opens. A Line End Transponder (ELTSI) can be used for reliable detection of an open line. More than one ELTSI can be connected to the same line, allowing monitoring of several branches on the speaker line. The amplifier also monitors control inputs, power, temperature, network connections and every other component required for operation of essential services. Faults will be indicated locally on the amplifier and the fault relay, as well as reported to the AlphaCom server which can raise an event or forward the reports to syslog, SNMP and internal log.
The amplifier’s control inputs/outputs and audio inputs can be used locally by the amplifier (e.g. for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music).
Contents
Installation, Indicators and Dimensions
Configuration
AlphaCom mode
- Getting started (ICX-AlphaCom mode)
- ICX-AlphaCom mode
- Amplifier monitoring
- Report amplifier faults to Display Station
- HD audio for background music distribution
- Distributed Automatic Volume Control (DAVC)
SIP mode
- Getting Started (SIP mode)
- Web interface - SIP mode
- Distributed Automatic Volume Control (DAVC) in SIP
Common Configuration
Software Upgrade and Restore Factory Defaults
The ENA amplifier is a "Turbine" device, and the software is upgraded in the same way as Turbine Intercom stations.
Load Factory Default values:
- Factory Default values can be loaded via the web interface of the amplifier, from the Station Administration > Reboot menu
- Factory Reset Button: Insert a straightened paper clip or similar device into the hole - Wait 7 seconds after power-on, then push for 1 second and release.