IP-ARIO: Difference between revisions
From Zenitel Wiki
No edit summary |
|||
| Line 7: | Line 7: | ||
*Remote AlphaCom RS232 port over IP | *Remote AlphaCom RS232 port over IP | ||
== | == Requirements == | ||
'''Software:''' | |||
* AMC-IP version 11.2.3.1 or newer | * AMC-IP version 11.2.3.1 or newer | ||
* AlphaPro Version 11.2.3.0 or newer | * AlphaPro Version 11.2.3.0 or newer | ||
'''Server:''' | |||
* AlphaCom server is required | |||
* The IP-ARIO is not supported in Pulse or SIP mode. | |||
== License Requirements == | == License Requirements == | ||
Revision as of 09:00, 11 July 2017
The IP Audio Remote I/O (IP-ARIO) unit has a wide set of hardware functions. It can be used as:
- PA Interface over IP
- Radio Interface over IP
- Remote I/O unit over IP
- Remote AlphaCom RS232 port over IP
Requirements
Software:
- AMC-IP version 11.2.3.1 or newer
- AlphaPro Version 11.2.3.0 or newer
Server:
- AlphaCom server is required
- The IP-ARIO is not supported in Pulse or SIP mode.
License Requirements
- An IP-ARIO Audio License is required in the AlphaCom when the audio part of IP-ARIO is used, i.e. when the IP-ARIO is used as PA interface or as a Mobile Radio interface.
- If only the I/O part of the IP-ARIO is used, no license is required. The AlphaCom will automatically recognize the unit as an IP-ARIO and allow it to register without a license.