Difference between revisions of "ECPIR-3P"
From Zenitel Wiki
(→Configuration) |
(→Configuration) |
||
| Line 12: | Line 12: | ||
* [[IP Station Configuration - Pulse mode|Pulse mode]] (*) | * [[IP Station Configuration - Pulse mode|Pulse mode]] (*) | ||
| − | :(*) SIP and Pulse mode is fully supported as from version 4.7. | + | :(*) SIP and Pulse mode is fully supported as from firmware version 4.7. |
== Advanced Network Settings == | == Advanced Network Settings == | ||
Revision as of 12:57, 16 June 2017
Contents
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
- AlphaCom mode
- SIP mode (*)
- Pulse mode (*)
- (*) SIP and Pulse mode is fully supported as from firmware version 4.7.
Advanced Network Settings
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Accessories
| 100px | 
|
|
|
|
| EBMDR-8 | MB-30G | EMMAR-1H | EMBR-1 | EMBR-2 |
