Actions

Difference between revisions of "Licensing in IC-EDGE"

From Zenitel Wiki

(Installing a licence)
(Undo revision 201596 by Asle (talk))
Line 36: Line 36:
  
 
[[File:Edge SIP Licenses.png|thumb|700px|left|License for 4 SIP devices installed]]
 
[[File:Edge SIP Licenses.png|thumb|700px|left|License for 4 SIP devices installed]]
 
+
<br style="clear:both;" />
  
  
 
[[Category: IC-EDGE Configuration]]
 
[[Category: IC-EDGE Configuration]]

Revision as of 14:10, 1 April 2019

Edge-icon.jpg
icon This article is under construction!


Some devices used in the IC-EDGE System requires that a software license is installed. The license key is linked to the MAC address of the Edge Controller.

The following devices require a license:

Note icon
  • From factory there is a 60-day free license period during which all devices can be used without the need of any license.
  • When the free license period expires there must be a valid license installed, if not the licensed device will cease to operate


Available licenses

The following licenses are available:

License Item Number Comments
Intercom Extension 100 9661 001 License for additional Vingtor-Stentofon devices beyond 32. One license per device. Note that the first 32 devices do not require any license
SIP Client Extension 100 9661 201 License for 3rd party SIP telephone. One license per phone
Telephone Gateway 100 9662 001 License for GSM telephone gateway and Analog telephone gateway. One license per gateway


Installing a licence

To insert a license:

  • Obtain the license key from your local supplier
  • Log on to the Edge Controller
  • Select Edge Controller > Licensing
  • In the New License field enter a valid license code, then Activate License
License for 4 SIP devices installed