IP-LCM

IP Line Connection Module (1008095201)

The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.

• 8 relay outputs
• 8 control inputs
• Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
• Device powered via the TKIS-2 kit using PoE or local power
• All TKIS-2 features are available, including:
  • 1 relay
  • 6 inputs

In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.

License Requirements

• An IP Station License is required in the AlphaCom. An IP Station License is required for ICX-AlphaCom.
• Even if only the I/O part of the IP-LCM is used a license is required!

Getting started

• Connections
• Starting up

Configuration

General configuration:

• ICX-AlphaCom mode
• Edge mode
• SIP mode

Device specific configuration for the IP-LCM:

• AlphaCom mode
• Edge mode
• SIP mode

Restore Factory Defaults and Software Upgrade

• Restore Factory Defaults
• Upgrade via the station web interface
• Upgrade using the IMT tool
• Software Release Notes

Connectors, Indicators and Dimensions

• Board Connections
• Dimensions

Software Requirements

The IP-LCM is fully supported from device version 4.11.x.x

When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7

Related Information

• VoIP kit as PA Interface
• Additional Documentation on Zenitel.com