Difference between revisions of "IP-LCM"

Revision as of 09:24, 22 April 2024

The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.

DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.

IP Line Connection Module (1008095201)

The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.

8 relay outputs
8 control inputs
Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
Device powered via the TKIS-2 kit using PoE or local power
All TKIS-2 features are available, including:
- 1 relay
- 6 inputs

In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.

License Requirements

Even if only the I/O part of the IP-LCM is used a license is required.

Getting started

Starting up

Configuration

General configuration:

Device specific configuration for the IP-LCM:

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Software Requirements

The IP-LCM is fully supported from device version 4.11.x.x

When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7

Related Information

@@ Line 43: / Line 43: @@
 Device specific configuration for the IP-LCM:
-*[[IP-LCM Configuration (AlphaCom mode)|AlphaCom mode]]
+*[[IP-LCM Configuration (ICX-AlphaCom)|ICX-AlphaCom mode]]
 *[[Relay_Settings_(Edge)#Operating the relay of a Remote Device|Edge mode]]
 *[[Relay_Settings_(SIP)|SIP mode]]