Difference between revisions of "Message Formats (Sortable)"
From Zenitel Wiki
| Line 115: | Line 115: | ||
|[[DELETE_MAIL ]] || align=center |$DELM|| align=center |0x0034 || Delete a mail entry in the queue for an intercom station | |[[DELETE_MAIL ]] || align=center |$DELM|| align=center |0x0034 || Delete a mail entry in the queue for an intercom station | ||
|- | |- | ||
| − | |[[ | + | |[[DELETE_MAIL_ACK]] || align=center | || align=center |0x0035 || Response to the DELETE_MAIL message |
|- | |- | ||
| − | |[[ | + | |[[DEVICE_INFO]] || align=center | || align=center |0x003B || Response to the GET_DEVICE message |
|- | |- | ||
| − | |[[ | + | |[[DIAL_DAK ]] || align=center |$DIAL_DAK|| align=center |0x0094 || Dial DAK on a station |
|- | |- | ||
| − | |[[ | + | |[[DIAL_DIGITS ]] || align=center |$DD|| align=center |0x0050 || Simulate digit dialing from a station |
|- | |- | ||
| − | |[[ | + | |[[SINGLE_DIGIT ]] || align=center |$DIG || align=center |0x0051 || Dial one digit on a station |
|- | |- | ||
| − | |[[ | + | |[[DIGIT_RELEASE ]] || align=center |$DREL|| align=center |0x0052 || The station has released a digit press |
|- | |- | ||
| − | |[[ | + | |[[DISC_REQ ]] || align=center | || align=center |0x0011 || Conversation established with CONN_REQUEST: The external application disconnects a conversation. |
|- | |- | ||
| − | |[[ | + | |[[CONN_REF_ACK ]] || align=center | || align=center |0x000E || Conversation established with CONN_REQUEST: The AlphaCom acknowledges the DISC_REQ message |
|- | |- | ||
| − | |[[ | + | |[[DISCON_ST ]] || align=center |$DISCON_ST|| align=center |0x008E || Disconnect station from ongoing feature |
|- | |- | ||
| − | |[[ | + | |[[CONN_STATUS_BC ]] || align=center | || align=center |0x0042 || Broadcast message telling that a connection is disconnected |
|- | |- | ||
| − | |[[ | + | |[[DISCONNECTED ]] || align=center | || align=center |0x000F || Conversation established with CONN_REQUEST: Conversation was disconnected, e.g. the user pressed C-key |
|- | |- | ||
| − | |[[ | + | |[[DISCONNECTED_ACK ]] || align=center | || align=center |0x0010 || Conversation established with CONN_REQUEST: Acknowledge of the DISCONNECTED message |
|- | |- | ||
| − | |[[ | + | |[[DISPLAY_TEXT ]] || align=center |$DSPL|| align=center |0x005A || Send text and control characters to a station |
|- | |- | ||
| − | |[[ | + | |[[DPMT_INVALID ]] || align=center | || align=center |0x0000 || Reserved value for internal use |
|- | |- | ||
| − | |[[ | + | |[[DIGIT_RELEASE ]] || align=center |$DREL|| align=center |0x0052 || The station has released a digit press |
|- | |- | ||
| − | |[[ | + | |[[DUMMY ]] || align=center | || align=center |0xFFFE || Test message: Should be routed, accepted and ignored |
|- | |- | ||
| − | |[[ | + | |[[EVENT_REPORT]] || align=center |$ER U15 || align=center |0x0067 || Report an event to the event/action system |
|- | |- | ||
| − | |[[ | + | |[[EXECUTE_COMMAND ]] || align=center | || align=center |0x004F || Send a command string to the exchange to be executed there |
|- | |- | ||
| − | |[[ | + | |[[EXIT_FEATURE_BC ]] || align=center | || align=center |0x0043 || Broadcast message when a directory number (feature 50) is dialed on a station |
|- | |- | ||
| − | |[[ | + | |[[EXT_MAIL ]] || align=center | || align=center |0x0030 || Response to the GET_x_MAIL messages |
|- | |- | ||
| − | |[[ | + | |[[GET_ABSENCE ]] || align=center |$GABS|| align=center |0x0029 || Get absence status for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_REQ_TRANSF ]] || align=center | || align=center |0x002C || Get the Call Request Transfer status for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_DEVICE ]] || align=center |$GDEV || align=center |0x003A || Get information from an external device |
|- | |- | ||
| − | |[[ | + | |[[GET_FIRST_MAIL ]] || align=center | || align=center | 0x002E || Get the first mail entry in the queue for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_LAST_MAIL]] || align=center | || align=center |0x0064 || Get the last mail entry in the queue for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_NEXT_MAIL ]] || align=center | || align=center |0x002F || Get the next mail entry in the queue for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_PIN_COUNTS ]] || align=center |$GPC || align=center |0x0013 || Query a RIO about number of output and input pins and support for non mandatory features |
|- | |- | ||
| − | |[[ | + | |[[GET_PREV_MAIL]] || align=center | || align=center |0x0063 || Get the previous mail entry in the queue for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_REQ_TRANSF ]] || align=center | || align=center |0x002C || Get the Call Request Transfer status for an intercom station |
|- | |- | ||
| − | |[[ | + | |[[GET_SYSTEM_TIME ]] || align=center |$GTS|| align=center |0x0025 || Ask a device (AlphaCom) for date and time |
|- | |- | ||
| − | |[[ | + | |[[GET_THIS_MAIL]] || align=center | || align=center |0x004A || Get the identified mail entry in the queue for an intercom station |
|- | |- | ||
| − | |[[AUDIO_LINK_OK ]] || align=center | || align=center |0x8003|| Response to AUDIO_PATH_SETUP. Channel number is OK | + | |[[SET_GRP_FILT ]] || align=center | $GFLT || align=center | 0x007D || Set group call filter for a station |
| + | |- | ||
| + | |[[GLOB_GRP_MEMB ]] || align=center | || align=center |0x006A || A exchange tells which global groups this exchange is member of by broadcasting this to all exchanges | ||
| + | |- | ||
| + | |[[GET_PIN_COUNTS ]] || align=center | $GPC || align=center | 0x0013 || Query a RIO about number of output and input pins and support for non mandatory features | ||
| + | |- | ||
| + | |[[GROUP_MEMBERSHIP ]] || align=center | $GRM || align=center | 0x0081 || Set group membership in NVRAM for a station | ||
| + | |- | ||
| + | |[[HANDSET_OFF ]] || align=center | $HOFF|| align=center | 0x0056 || Order station to lift handset | ||
| + | |- | ||
| + | |[[HANDSET_ON ]] || align=center | $HON || align=center | 0x0057 || Order station to replace handset | ||
| + | |- | ||
| + | |[[ILLEGAL_PARAM ]] || align=center | || align=center | 0x0023 || Negative response | ||
| + | |- | ||
| + | |[[PARK_INQ_BROKER ]] || align=center | $INQ || align=center | 0x0086 || Park station from conversation, enter Inquiry call state | ||
| + | |- | ||
| + | |[[LOG_STRING ]] || align=center | $LOG || align=center | 0x0075 || Output String to System Log | ||
| + | |- | ||
| + | |[[LOOPBACK_IMPOSSIBLE ]] || align=center | || align=center | 0x8014 || Response to AUDIO_CH_LOOPBACK_REQ | ||
| + | |- | ||
| + | |[[M_KEY ]] || align=center | $M || align=center | 0x0054 || Order station to press M-key | ||
| + | |- | ||
| + | |[[M_KEY_RELEASE ]] || align=center | $MREL || align=center | 0x0055 || Order station to release M-key | ||
| + | |- | ||
| + | |[[MAILQ_NAVIG ]] || align=center | $MAILQ_NAVIG || align=center | 0x008D || Do operation on mail queue, or step current mail in mail queue | ||
| + | |- | ||
| + | |[[PUT_STRING ]] || align=center | || align=center | 0x0073 || Output String to Exchange serial port after adding appropriate framing depending on selected port | ||
| + | |- | ||
| + | |[[NAME_EXTENSION ]] || align=center | || align=center | 0x0080 || Special exchange mode using two line names: Send the second line through AlphaNet | ||
| + | |- | ||
| + | |[[NO_ACCESS ]] || align=center | || align=center | 0x003F || Negative response to CONN_REQUEST | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
| + | |- | ||
| + | |[[AUDIO_LINK_OK ]] || align=center | || align=center | 0x8003 || Response to AUDIO_PATH_SETUP. Channel number is OK | ||
|- | |- | ||
Revision as of 14:52, 25 June 2007
| Message | Short format | Message id, Hex | Description |
|---|---|---|---|
| ABSENCE_STATUS | 0x002A | Response to SET_ABSENCE and GET_ABSENCE messages | |
| ALARM_MSG | $ALRM | 0x0007 | Set up (or disconnect) an ASVP Alarm message to a single station or a predefined group of stations |
| ALARM_MSG_ACK | 0x0009 | Positive response to ALARM_MSG | |
| AUDIO_CH_DISCON | 0x8012 | Disconnect a audio channel after loopback test | |
| AUDIO_CH_FAULTY | 0x8013 | Response to AUDIO_CH_LOOPBACK_REQ: Requested channel was faulty | |
| AUDIO_CH_LOOPBACK_ACK | 0x8011 | Positive acknowledge of AUDIO_CH_LOOPBACK_REQ | |
| AUDIO_CH_LOOPBACK_REQ | $ALRM | 0x8010 | Request for loopback audio connection. Used by the Audio Channel Testing process |
| AUDIO_CH_TONE_REQ | 0x8015 | Request a peer exchange to put a 500Hz tone on a audio channel | |
| AUDIO_DETECT | $VOX | 0x0053 | Triggers the event Simplex_Conference_Audio |
| AUDIO_LINK_NOT_AVAILABLE | 0x8006 | Response to AUDIO_PATH_SETUP from next node: Channel not granted | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_RELEASE | 0x8005 | Used to release audio path backwards stepwise from node to node when setup meets busy or faulty link | |
| AUDIO_M_FEED_REQ | 0x801A | Global Simplex Conference: Some station is pressing the M-key when participating in a conference | |
| AUDIO_M_FEED_STOP | 0x801B | Global Simplex Conference: The station is releasing the M-key | |
| AUDIO_M_LINK_OK | 0x8019 | Per hop positive response to AUDIO_M_PATH_SETUP | |
| AUDIO_M_PATH_BACKTRACK | 0x8018 | AUDIO_M_PATH_SETUP failed | |
| AUDIO_M_PATH_OK | 0x8017 | Contains statuses for an AUDIO_M_PATH_SETUP from one or more destination exchanges | |
| AUDIO_M_PATH_SETUP | 0x8016 | Communication in a multi-node network | |
| AUDIO_PATH_CHECK_OK | 0x800F | Positive response to CHECK_AUDIO_PATH | |
| AUDIO_PATH_DELAY | 0x8007 | Set Duplex switch delay | |
| AUDIO_PATH_DISCONNECT | 0x8006 | Release the endtoend audio path. Normal disconnect from source or destination | |
| AUDIO_PATH_OK | 0x8002 | End to end message: Audio path is ready | |
| AUDIO_PATH_SETUP | 0x8001 | Set up audio path between a source node and a destination node (possibly via transit nodes) | |
| BUILD_GLOB_GRP | 0x0070 | Broadcast message to all exchanges to make them rebuild global group indexes | |
| C_KEY | $C | 0x0058 | Order station to press C-key |
| CALL_SETUP | $CALL | 0x0008 | Sets up a coversation between two users |
| CALL_STATUS_BC | 0x0040 | Broadcast message telling the status of a call | |
| CALL_TRANSFER | $TRF | 0x0044 | Set or remove call transfer for a station |
| CALL_TRANSFER_NOK | 0x0046 | Negative response to CALL_TRANSFER | |
| CALL_TRANSFER_OK | 0x0045 | Positive response to CALL_TRANSFER | |
| CANCEL_MAIL | $CANM | 0x0065 | Delete one or more mail/call request/alarm messages queued at a station |
| CHECK_AUDIO_PATH | 0x800E | Check of established audio path at regular intervals | |
| CLEAR_RCO | $CLR | 0x0015 | Turn the given remote control output off |
| CLEAR_RCO_FAILED | 0x0017 | Negative response to the CLEAR_RCO message | |
| PULSE_RCO_OK | 0x001C | Positive response to the PULSE_RCO message | |
| COMMAND_RESPONSE | 0x0066 | General response message to messages | |
| CONF_TALK | $CONF_TALK | 0x008B | Set Simplex conference speaker |
| CONF_TALK_STOP | $CONF_TALK_STOP | 0x008C | Stop station form feeding Simplex conference |
| PROG_CONF | $CONF | 0x0004 | Set Simplex conference for predefined group of stations or a single station |
| CONF_IS_ROOT | 0x007B | Broadcast message. Sender informs that it is root of conference | |
| CONF_JOIN | 0x0078 | Exchange wants to join conference, asks root-exchange to setup connection back to sender | |
| CONF_MEMB_CHK | 0x0079 | Ask whether any neighbor exchange has any ordinary member left in conference | |
| CONF_NOT_ROOT | 0x007C | Broadcast message. Sender informs that it is no longer root of conference | |
| CONF_ORD_MEMB | 0x007A | An exchange tells its neighbors that it has ordinary member left in conference | |
| CONF_TALK | $CONF_TALK | 0x008B | Set Simplex conference speaker |
| CONF_TALK_STOP | $CONF_TALK_STOP | 0x008C | Stop station form feeding Simplex conference |
| CONN_REQUEST | $CONN | 0x000A | Sets up a coversation between two users |
| CONN_REF_ACK | 0x000E | The external application acknowledges the CONN_REFERENCE | |
| CONN_REFERENCE | 0x000B | Positive response from the exchange to CONN_REQUEST | |
| CONN_STATUS_BC | 0x0041 | Broadcast message telling that a connection is established | |
| CONSOLE_DISC | 0x007E | Log off from system debug console (TST) | |
| CONSOLE_REQ | 0x007E | Log on to system debug console (TST) | |
| COPY_MAIL | $CPYM | 0x0083 | Send a copy of a mail in own queue to a new destination (station or group) |
| DIAL_DIGITS | $DD | 0x0050 | Simulate digit dialing from a station |
| DELETE_MAIL | $DELM | 0x0034 | Delete a mail entry in the queue for an intercom station |
| DELETE_MAIL_ACK | 0x0035 | Response to the DELETE_MAIL message | |
| DEVICE_INFO | 0x003B | Response to the GET_DEVICE message | |
| DIAL_DAK | $DIAL_DAK | 0x0094 | Dial DAK on a station |
| DIAL_DIGITS | $DD | 0x0050 | Simulate digit dialing from a station |
| SINGLE_DIGIT | $DIG | 0x0051 | Dial one digit on a station |
| DIGIT_RELEASE | $DREL | 0x0052 | The station has released a digit press |
| DISC_REQ | 0x0011 | Conversation established with CONN_REQUEST: The external application disconnects a conversation. | |
| CONN_REF_ACK | 0x000E | Conversation established with CONN_REQUEST: The AlphaCom acknowledges the DISC_REQ message | |
| DISCON_ST | $DISCON_ST | 0x008E | Disconnect station from ongoing feature |
| CONN_STATUS_BC | 0x0042 | Broadcast message telling that a connection is disconnected | |
| DISCONNECTED | 0x000F | Conversation established with CONN_REQUEST: Conversation was disconnected, e.g. the user pressed C-key | |
| DISCONNECTED_ACK | 0x0010 | Conversation established with CONN_REQUEST: Acknowledge of the DISCONNECTED message | |
| DISPLAY_TEXT | $DSPL | 0x005A | Send text and control characters to a station |
| DPMT_INVALID | 0x0000 | Reserved value for internal use | |
| DIGIT_RELEASE | $DREL | 0x0052 | The station has released a digit press |
| DUMMY | 0xFFFE | Test message: Should be routed, accepted and ignored | |
| EVENT_REPORT | $ER U15 | 0x0067 | Report an event to the event/action system |
| EXECUTE_COMMAND | 0x004F | Send a command string to the exchange to be executed there | |
| EXIT_FEATURE_BC | 0x0043 | Broadcast message when a directory number (feature 50) is dialed on a station | |
| EXT_MAIL | 0x0030 | Response to the GET_x_MAIL messages | |
| GET_ABSENCE | $GABS | 0x0029 | Get absence status for an intercom station |
| GET_REQ_TRANSF | 0x002C | Get the Call Request Transfer status for an intercom station | |
| GET_DEVICE | $GDEV | 0x003A | Get information from an external device |
| GET_FIRST_MAIL | 0x002E | Get the first mail entry in the queue for an intercom station | |
| GET_LAST_MAIL | 0x0064 | Get the last mail entry in the queue for an intercom station | |
| GET_NEXT_MAIL | 0x002F | Get the next mail entry in the queue for an intercom station | |
| GET_PIN_COUNTS | $GPC | 0x0013 | Query a RIO about number of output and input pins and support for non mandatory features |
| GET_PREV_MAIL | 0x0063 | Get the previous mail entry in the queue for an intercom station | |
| GET_REQ_TRANSF | 0x002C | Get the Call Request Transfer status for an intercom station | |
| GET_SYSTEM_TIME | $GTS | 0x0025 | Ask a device (AlphaCom) for date and time |
| GET_THIS_MAIL | 0x004A | Get the identified mail entry in the queue for an intercom station | |
| SET_GRP_FILT | $GFLT | 0x007D | Set group call filter for a station |
| GLOB_GRP_MEMB | 0x006A | A exchange tells which global groups this exchange is member of by broadcasting this to all exchanges | |
| GET_PIN_COUNTS | $GPC | 0x0013 | Query a RIO about number of output and input pins and support for non mandatory features |
| GROUP_MEMBERSHIP | $GRM | 0x0081 | Set group membership in NVRAM for a station |
| HANDSET_OFF | $HOFF | 0x0056 | Order station to lift handset |
| HANDSET_ON | $HON | 0x0057 | Order station to replace handset |
| ILLEGAL_PARAM | 0x0023 | Negative response | |
| PARK_INQ_BROKER | $INQ | 0x0086 | Park station from conversation, enter Inquiry call state |
| LOG_STRING | $LOG | 0x0075 | Output String to System Log |
| LOOPBACK_IMPOSSIBLE | 0x8014 | Response to AUDIO_CH_LOOPBACK_REQ | |
| M_KEY | $M | 0x0054 | Order station to press M-key |
| M_KEY_RELEASE | $MREL | 0x0055 | Order station to release M-key |
| MAILQ_NAVIG | $MAILQ_NAVIG | 0x008D | Do operation on mail queue, or step current mail in mail queue |
| PUT_STRING | 0x0073 | Output String to Exchange serial port after adding appropriate framing depending on selected port | |
| NAME_EXTENSION | 0x0080 | Special exchange mode using two line names: Send the second line through AlphaNet | |
| NO_ACCESS | 0x003F | Negative response to CONN_REQUEST | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK | |
| AUDIO_LINK_OK | 0x8003 | Response to AUDIO_PATH_SETUP. Channel number is OK |