AlphaCom 10.4x - Release Notes

Software in production: AMC 10.20<br\> Software released date: 2007-04-12<br\> Note 1: We sometimes do bug fixes in older versions while working with a new version. You can’t read the list version by version, and always assume that a correction is included in the next. Be aware of high release numbers, e.g. 06.05 vs. 07.01. Check version dates, and also comments for each version. <br\> Note 2: For each software version the NVRAM version is listed. If the NVRAM version is different, the AMC board must be cold started, and then you must do a SendAll from AlphaPro to restore the configuration.<br\><br\><br\>

AlphaCom 10.xx Release Notes

<br\>

Upcoming 1052x

• Chilly start of AMC-IP
• Faster restart of slaves in multimodule, when multimodule data over IP. (Slave modules inform master when it receives TCP connection from Master. Master then proceeds with the startup procedure immediately.)
• ST_BUSY_BC/ST_FREE_BC broadcasts for AlphaNet audio lines (proxy), use NRF_LOCAL_ENTITY, in order to avoid confusion with the corresponding events from the end-stations for AlphaNet calls.
• Codec handling for incoming from SIP: Dont force to codec set in node-profile. Just use best codec offered in INVITE.
• Paging queue improvements. Allow several simultaneous calls to same receiver, so that a unacknowledged call does not block new calls to same receiver. ISO 1745 linklayer improved (send outgoing messages immediately, dont poll self if nothing to send).
• BZ 12 Logging of paging and group calls. Syslog of Paging ISO1745 linklayer up/down combined with System Status (Event Type) report.
• BZ 54 $CALL and call priority now control open/private
• BZ 61 RMD conflict with SIP nodes, AlphaWeb RMD configuration pages fixed.
• BZ 75 EDO number of characters over AlphaNet
• BZ 76 Feature reminder default off for ATLB stations, Ringing group still works.
• BZ 85 Sipd reset when not resolving hostname fails REMEMBER Build and Release SIPD 01.15!!!
• BZ 87 Copy mail and private ringing priority (150) fix.
• BZ 106 PUT_STRING : MPC header corrected from 0x80 to 0x00
• BZ 108 Buffer data for TCP client if no connection. Start connection on write if in wait state. Faster connect after reset.
• BZ 118 Call Req not deleted when using 7638 in Absent status.
• BZ 116 AMCD crashed in error report function
• BZ 127 No MAC address in multicast ping during free license periode
• BZ 140 O DUPL CONF bugs
• MPP - Mail to Pocket Pager improvements: Max length of Free text increased from 16 to 128. Possible to specify pager address directly in quotes.
• AlphaWeb station list shows 16 character display name (previous 12)
• Only IP station with display can use C-key as private/open key. DP command C_PRES also generate local C_RELEASE so that open/private mode change does not occure.
• UDP info added to ST_STATE message
• No Echo canceller in use during dial/busy/reset-tone on IP stations
• OPC license quantity steps adjusted to 40,80,160,240,320,400,552
• BZ 117 OPC: Non-existing stations are registered, consuming license
• Multi Module license added. For backward compatibility AlphaNet licenses will be used if no Multi module licenses in the license key. AlphaNet-Multi module licenses need licenses in all modules, Multi Module license is only needed in the master module.
• Multi Module license revised in 1052x213. License define the number of modules possible to connect 1,2 or 3. Always 31 audio channels.
• BZ 124Event 34, reporting boards UP/DOWN Board_Status_(Event_Type)
• BZ 129(Billing PIN CODE tone changed 1052x0108)
• Force conversation to Simplex mode. Data protocol command added $SIMP
• Improved handling of IP station up messages, close socket on duplicated MAC etc.
• Back Plane messages delay to ASVP did also effect VoIP setup speed, fixed
• Stability improvement for IP multi module calls 1052x0213
• Implemented ping-test of analog PrisCom station processor. "Cellstation" flag must be enabled. Every PrisCom station are tested in combination with the extended line test timer. (IND 99 is sent to the station and IND ack suspected as reply.) If no reply for two tests the station is reported down to ERR and event handler. However the station is still in active state. (1052x213)
• High availability system: If there has been connection to a configurable number of IP stations (op_constants(0).sbm_ip_st_down_trig) and all IP station connections are lost: set the standby request flag. (1052x213)
• Low level queue size of ACDP protocols increased.
• BZ 130 RCO trouble on IP master at physical 67&68 (1052x0119)
• BZ 135 AMC reset when using data commands to answer ringing group call (1052x0119)
• BZ 136 Duplex AlphaNet Call to IP station, lifting A-handset don't go "open" Duplex (1052x0119)
• BZ 138 Event conversation outgoing and RingingGroup call from SIP (1052x0119)
• BZ 141 Global Group call problems in previous 1052x versions fixed
• Busy/Free messages on MPC from IP Proxy AlphaNet links is removed for better consistence. Busy/Free/Connect from other nodes must be sent from event handler in remote nodes. (1052x219)
• Due to problems with the faders on ATLB12 cards, the faders and duplex resources is not used for ATLB12 with software versions bellow 05.30.

AMC 1051(2008-10-10)

Release: Official, available on request
/opt/amc/bin/amcd
NVRAM version 10.50. 

System upgrade file:<br\> alpha_sys_10_51.tbz2<br\>

Precautions:<br\> alpha_sys_10_00.tbz2 must be installed.<br\><br\> AlphaPro 1028 or later must be used due to WACS crash caused by to large nvram size when using older versions.

Errors Corrected

(BZ = Bugzilla reference number)

BZ 37 Missing stations after multi module reset

From time to time after slave reset some stations would not come up or board leds shown wrong status. <br\> Issues with package burst on the bakplane fixed.

BZ 83 E7 in slave mode, program distribution from master

Normal program distribution in slaves use port number 5 and 6 on board 1. When program distribution in master is configured the ports can now be used as stations.

BZ 86 RCO's on disabled ASLT ports used for IP stations

The RCO on ports configured for IP stations did not work, fixed

BZ 88 Feature IP config (7810)

When configuring you would receive cancel tone for more then 2 digits in last octet, fixed

BZ 89 Remote Reset of station feature

Failed if user number is different from physical number, fixed

BZ 96 Dual Display text update in AlphaNet

Long text was not updated in the display. Issues with update of dual display during AlphaNet calls fixed.

BZ 98 Sporadic resets when enter 83xx conference

RTP audio monitoring was not correctly turned of after AlphaNet use. Internal resource address problems could reset the exchange. Fixed

AMC 10.50 (2008-09-22)

Release: Official, available on request
/opt/amc/bin/amcd
NVRAM version 10.50. 

System upgrade file:<br\> alpha_sys_10_50.tbz2<br\>

Precautions:<br\> alpha_sys_10_00.tbz2 must be installed.<br\><br\> AlphaPro 1028 or later must be used due to WACS crash caused by to large nvram size when using older versions.

Errors Corrected

(BZ = Bugzilla reference number)

BZ 13 ASVP random reset

Some ASVP card is observed arbitrary to perform reset after playback of message. Additional delay added during data communication with ASVP cards.

BZ 17 Return of audio program

The audio progam is now return also for station in Private mode. (1043x0627)

BZ 18 IP audio gain adjustment

IP audio Gain adjustment: Changed default limit to zero dB

BZ 20 IP stations and 83xx conference

IP stations can now enter 83xx conference without ASLT cards present in the exchange(1043x826)

BZ 23 Echo in call from IP station to RM

Use of LEC added to RM station side of call. (1043x826)

BZ 24 IP Master display in call request mode

IP Master display is now update during call request mode (1043x0627)

BZ 27 RCI in slave modules

Issues when resetting slaves fixed. (1043x826)

BZ 30 Call request ASVP message to IP stations

Call request ASVP message to IP stations is now handled without echo cancelation. (1043x0627)

BZ 31 CRM at physical number 1, mail queue problems fixed

Mail queue of CRM at physical number 1 is now updated correctly. (1043x826)

BZ 32 Private break in and digits during conversation

If a station use Private Break-in (feat 106) towards a station, and the station accept the call, digits during conversation now work from A-subscriber (1043x0715)

BZ 33 New current mail event(23)

New current mail event(23) now reports correct OFF event when a new mail with higher priority is received.(1043x723)

BZ 35 Chime in IP station

A 100ms delay is added in front of the gong tone to allow the IP stations to be ready.(1043x826)

BZ 50 DTMF mode use of * and #

DTMF for * and # is now supported as DAK 1 and 2 (No DAK programming needed, same system as SIP/PNCI dialling)(1043x0715)

BZ 51 Feature 107 on DAK keys

Feature 107 now works when programmed on DAK.(1043x0715)

BZ 53 IP stations on ASLT physical positions

When IP stations configured on present ASLT positions the IP station will be reported down if removing the ASLT card, fixed. (1043x826)

BZ 68 "related to" UDP for event 25

UDP information added for event 25 when local user numbers dialled. (1043x826)

BZ 78 IP station call statistics got wrong time value

Too long call durations for some statistics call log entry fixed. Missing call log for IP - IP station conversations fixed. <br\> Added call log for outgoing SIP calls.

BZ 83 E7 with IP audio program distribution

E7 with IP audio program distribution from master now has physical number 5 and 6 available in the slaves.

Combination of program disconnect features

Using simultaneously the "no program during group call" flag and the temporary disconnect program ($TPROG) command did avoid the program coming back to the station after group call and $TPROG restore. <br\>

Functional changes / Enhancement

Set IP AlphaCom IP address feature

New feature for setting the AlphaCom IP address from the system station. IP_config (1043x826)

Reduced number of syslog messages

• System/Debug log messages of type INFO_DPMR_NO_ROUTE is only logged every 64 time to avoid "endless" log when nodes are missing.
• Debug log from SIPD, "unknown message received" removed.

M-key operation in calls with IP stations.

Data signalling to IP station added to assure correct M key operation.

70 program feeds

Extended number of program feeds from 38 to 70 program feeds (1043x723) <br\>

Direct transfer feature

Direct transfer feature implemented for transfer without inquiry. Direct transfer during connection(1043x723)

High availability license system

License use in High Availability systems of standby cards changed to allow only need of license on card in position 25.

BZ 5 Hold/Trf from IP Master

Hold/Trf from IP Master, now IP station default use DAK 4 for transparent mode (1043x0627)

BZ 25 Display on IP Stations update

Display on IP Stations is now update with no delay (1043x0627)

BZ 26 Remote delete of mail.

It is now possible from read mail from remote feature to delete mails. (Useful for deleting mails from substations) (1043x826)

BZ 28 IP master Open/Private mode

IP master Open/Private mode can now be Enable/Disable with "C" key on IP Station (1043x0627)

BZ 29 Dial tone during digit collection

Dial tone during digit collection of digit on AlphaNet/SIP trunk calls is now changed to handset dial tone.(1043x723)

BZ 77 Override and handset use

During volume override and use of handset the default overhearing from microphone to loudspeaker on the ASLT card is active. New DP message introduced to turn off overhearing HS_SIDE. (1043x826)

AMC 10.43X0609 (2008-06-09)

Release: Official, available on request
/opt/amc/bin/amcd
NVRAM version 10.30. 

System upgrade file:<br\> alpha_sys_10_43x0609.tbz2<br\>

Precautions:<br\> alpha_sys_10_00.tbz2 must be installed.<br\><br\> AlphaPro 1028 or later must be used due to WACS crash caused by to large nvram size when using older versions.

Errors Corrected

Open Duplex Conference with Line Echo Cancelation (LEC)

introduced in 10.43x430: 56-odc-transfer from conversation was not working, unless old 3 AGA mixers present.

Ringing group activation from SIP in a multi-node system fails.

Ringing group functionality changed, see "Functional changes" below

Issue 3356: Hold/Trf from IP Master

On hold / Transfer is now available from IP master when nvram variable : ex_profile.glob_const.trans_mode_dak is set to Dak key available on IP-master (1-4)

Functional changes / Enhancement

RCO and RCI now available in slave modules

RCO and RCI from slave modules can now be programmed and used. RCO numbers follow the station physical numbers. RCI is related to device number of slave module.

Ringing group is now default global.

The ringing group system will now broadcast ringing group calls on AlphaNet. Global Ringing Group Description

Play DAK system added.

A system for single digit dialing with programmable delay. Play DAK feature description <br\> This feature can be programmed within a DAK string or with a DP command.

Beta version IP master support adjusted

• Support of privacy setting
• Display protocol with UniCode and UTF-8 coding

Adjustable speed for multi-module "copy to slaves" system

Default setting of nvram copy to slave timer is one "record" every 3 second (30 * 100ms) that will give copy time of approx. 27 hours. If set to 1 the speed will be around 1 hour. The copy starts 10 minutes after restart.

ex_profile.timeouts.nvram_mm_update = 30

The timer will only be used for the first copying of nvram after restart next round will take 27 hours.

RTP audio check on AlphaNet connections

Active IP AlphaNet connections will monitor the received audio frames, if no audio received for 40 seconds the link will reset. AlphaNet RTP supervision

AMC 10.43X0430 (2008-04-30)

Release: Official, available on request
/opt/amc/bin/amcd
NVRAM version 10.30. 

System upgrade file:<br\> alpha_sys_10_43x0430.tbz2<br\>

Precautions:<br\> alpha_sys_10_00.tbz2 must be installed.<br\><br\> AlphaPro 1028 or later must be used due to WACS crash caused by to large nvram size when using older versions.

Errors Corrected

Issue 3050: ODX from slaves via VoIP link:

ODX from stations in slave modules are now supported over VoIP link see enhancement bellow<br\>

Functional changes / Enhancement

Beta version IP master support adjusted

• Support of volume and backlight adjustment.
• New display protocol,

AMC 10.42 (2008-04-17)

NVRAM version 10.30.

System upgrade file:<br\> alpha_sys_10_42.tbz2<br\>

Errors Corrected

Repaired SimpleLinklayer broadcast of ACDP-links

... which was also broken in 10.40

AMC 10.41 (2008-04-14)

NVRAM version 10.30.

System upgrade file:<br\> alpha_sys_10_41.tbz2<br\>

Errors Corrected

Repaired AlphaNet data over UART

... which was broken in 10.40

AMC 10.40 (2008-04-10)

Release: Official, available on request
/opt/amc/bin/amcd
NVRAM version 10.30. 

System upgrade file:<br\> alpha_sys_10_40.tbz2<br\>

Precautions:<br\> alpha_sys_10_00.tbz2 must be installed.<br\><br\> AlphaPro 1028 or later must be used due to WACS crash caused by to large nvram size when using older versions.

Errors Corrected

Issue 3326 IP master use of "7638" mail call back

The "7638" function is now working also from the IP master station

Issue 3333 IP substation volume control fails

Setting of volume with DP message now works for IP stations

Issue 3341 Master IP and Ringing Group

Call request queue on IP master with different priorities, ringing group and call req now works.

Issue Inquiry/transfer

Possible lockup state during faulty use of inquiry/transfer removed.

Audio quality problems with max number of voip channels in use

DSP SW optimized, 31 active VoIP channels now works without distortion.

Functional changes / Enhancement

Default use of TCP-IP with Simple Linklayer between AlphaCom nodes in AlphaNet

Description : Data_link_layer#Selecting_data_link_layer_between_IP_nodes

IP station enhancement

• IP station tones during call request mode and "notify" are now generated in the IP station.
• ON/OFF hook state support for IP master station

ATLB stations and SIP

Allow ATLB stations to use R-key (Flash key) during call to SIP. (Do inquiry and transfer).<br\> ATLB12 cards currently not support R-key. (ATLB-6 cards works).

DAK programming from station

When programming a global number (feat 83) the destination node type is checked.

• SIP node or "collect N digits" programmed allow extra digit being programmed, accept with M-key.
• Destination node AlphaCom behave as AMC 8-9.

<br\> <br\> <br\> <br\>

Known Issues (Latest release)

<br\>

Known Issues

Issue 3020: Missing “Exch. Missing” text:

When making a global group call and some exchanges do not receive the group call due to not available audio links, there should be a display message "Exchange Missing".<br\>

Issue 3124: AlphaNet - NAT

AlphaNet does not work if NAT traverse is used.

Log System (Syslog)

<br\> The logging is handled by the syslog-ng log daemon. This can be configured to route the logs to different media. The log can be stored on on-board flash, or sent over the network with different protocols.

Known Issues

Large log files on on-board FLASH

The log is stored on a limited sized Flash partition by a file system. Routines to handle larger log amounts, like automatic clean up of older files have been implemented, but we still experience problems if the log rates get to large. These problems occur before a theoretical log rate versus free space analysis, mainly because of file system issues with a small number of available flash sectors. This file system factor makes it difficult to make an accurate estimate of handled log rates so the following is based on experience:

Limits:

Log rates lesser than 1440 events a day (an average of one each minute) should be handled with no problem.
Log rates of 17280 events a day (one each 5th second) is experienced to give problems.

Guideline:

If you are above 1440 events a day you should evaluate to use the Remote Syslog option, and turn off the Local Filesystem Log.
If you are closer to the 17280 events log rate we strongly advise to use only the Remote Syslog option. 
If your system are logging above the 1440 events a day to the filesystem you should regularly monitor the logs.

Note:

From AlphaCom 10.23 a log limiter on the System and Debug log is implemented, allowing for a maximum of 60 events a hour. 
If this limit  is reached, it will be notified by a log message. Because of this limit the above guidline will only apply 
to the Statistics log.

Hardware Drivers

<br\>

Rtpdaemon

/opt/amc/bin/rtpdaemon

Rtpdaemon is a user mode service which handle the RTP audio streams. It receives control commands from the AMCD main application on a control socket (/tmp/rtpd). Rtpdaemon transfers and receives RTP packets via standard Linux network sockets. Rtpdaemon packs and unpacks RTP packets. Received packets are buffered before play out. It transfers and receives serialized audio data to the DSP via a DSP driver.<br\>

Version 01.06: 2007-12-10<br\> Description:

• Support of Line Echo Cancellation (by using DSP#2 for LEC, infrastructure added for controlling DSP#2)

Version 01.05: 2007-11-08<br\> Description:

• Optimised socket handling for unicast'ed groupcalls.

Version 01.04: 2007-10-17<br\> Description:

• G.729, first experimental support (no support for DTX, lost or reorderd packets).

Version 01.03: 2007-10-11<br\> Description:

• Issue 3269 Different UDP port on send/receive: Use sendto(), instead of connect()+write()
• txtap function to tap audio to an internal socket.

Version 01.02: 2007-03-23<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_20.tbz2<br\>

• Jitterbuffer adjustments (Issue 3101 Xlite). Improve stabilty of delay adaptation, as well on adaptive delay target.
• Set IP TTL to 31 when connecting to UDP to multicast.

Version 01.01: 2007-03-05<br\> Description:<br\>

• Fix issue 2935: Crash when ExpressTalk sends packet with zero payload at disconnect.
• Improved handling of termination signals with logging.

Version 01.00: 2006-05-31<br\> Description: Released version. <br\> Introduced in initial release<br\><br\>

SIPdaemon

/opt/amc/bin/sipd

SIPdaemon is a user mode service which handle data communications with SIP devices. It receives AlphaNet control commands from the AMCD main application on a TCP socket (port 40000).<br\>

Version 01.17 (2009-02-09)

• Handling of AudioCodes_X-detect
• Fixed crash (in alpha_sdp_parse) when receive INVITE with no SDP body

Version 01.16 (2008-12-18)

• Introduced JSON based interface towards AMCD. Various cleansups.

Version 01.15 (2008-11-05)

• BZ 85 Sipd reset when not resolving hostname fails
• sipd do not require a node definition in AMCD to start ( /tmp/sipd_config )

Version 01.13 (2008-06-29)

• Send and receive INFOs for DTMF signals A - D
• Filter on '+' in directory number

Version 01.12 (2008-01-03):

• Outgoing INVITE, early cancel: Cancel before "180 Ringing" caused lockup, because of incorrect check for "SIP-dialog".

Version 01.11 (2007-12-10):

• Outgoing INVITE: Send AUDIO_PATH_STATE(TRYING) to AMCD immediately, allowing AMCD to handle cancel before first response from external SIP device.

Version 01.10 (2007-10-12):

• CANCEL of outgoing INVITE: Send CANCEL, not BYE

Version 01.09 (2007-09-18):

• Fixed bug in reINVITE handling as implemented in 01.08: Wrong RTP portnumber is used if port number in reINVITE is less than 4096 (0x1000).

Version 01.08 (2007-08-30):
Only released in X-version 10.22 package

• Handle reINVITE which redirects RTP audio to different IP address and port.
• Fixed bug in parsing of AUDIO_LINK_OK from AMCD, which could be rejected erroneously

Version 01.07 (2007-07-01):
Description: Released version, date 2007-06-01.
Introduced in system upgrade file: alpha_sys_10_21x0604.tbz2

• Removed memory leaks, increasing stability (issue 3176).
• Issues 3203, 3182.
• Debug error messages forwarded to syslog.
• Set scheduling priority.

Version 01.05:
Description: Released version.
Introduced in system upgrade file: alpha_sys_10_20.tbz2<br\><br\>

DSP driver

/opt/amc/modules/dsp_drv

DSP driver is a kernel mode driver which provides a device file interface (/dev/dsp/) to RTP daemon for communicating control commands and audio to/from the DSPs. <br\>

Version 02.10: (2008-01-16)
Support for DSP_SW version 01.10: Setup of codec remapping for optimized DSP SW. (DSP SW 01.10 require driver version 02.10, but driver version 02.10 can support older versions of DSP SW)

Version 02.01 (2007-12-10):

• Required for Line Echo Cancellation ("disable" command, used to free DSP power for LEC).

Version 02.00: Board support package 03.xx (Linux 2.6):<br\> Description: Released version.
Introduced in system upgrade file: alpha_sys_10_03.tbz2<br\><br\>

Version 01.10 (2008-01-16):

• Same as 02.10, but for 2.4 linux kernel: Support for DSP_SW version 01.10

Version 01.01 (2007-12-10):

• Same as 02.01, but for 2.4 linux kernel

Version 01.00: Board support package 02.xx (Linux 2.4):<br\> Description: Released version.
Introduced in system upgrade file: alpha_sys_10_03.tbz2<br\>

DSP SW

/opt/amc/images/amc_dsp.hex

SW for the two DSPs. Currently the two DSPs runs identical SW. DSP does the G.711/G.722 transcoding. It also generates tones which are used in the system. Audio is transferred to the FPGA in 16 bit PCM format.

Version 01.15: 2009-02-17
Improved stability on inter-DSP serial link McBSP#1, used for LEC

Version 01.14: 2008-04-21
Conference mixing resources in DSP.

Version 01.13: 2008-04-07
More AGC adjusting: Reset at connection start, and wait 5 sec before start adjusting.

Version 01.12: 2008-03-03
AGC adjusted, stability timer wait 1 sec before reducing gain.

Version 01.11: 2008-02-15
Treble preemphasis towards backplane (DeEmp from backplane done in FPGA). Level adjustment and limiter function on 20xx/21xx codecs, ref AMCD 10.31.

Version 01.10: 2008-01-16
Optimized codec processing. Each codec type has now variable number of channels, sum is always 32. Controlled by structures set up from dsp_drv. Also optimised DTMF generators, units 0400-040f. Bottom line is that 32 channels is now working, with headroom for further development.
Requires dsp_drv version 02.10 / 01.10

Version 01.06: 2007-12-10
Full version with Line Echo Cancellation (LEC). 10 LEC-instances. (LEC processing moved to DSP#2, allowing 32 codec instances in DSP#1).

Version 01.05: 2007-11-20
Customer specific variant with Line Echo Canceling (LEC). Based on OSLEC. 6 channels of LEC, number of codec channels (G711/G722) reduced to 6.

Version 01.04: 2007-10-17<br\> Description: <br\>

• 16 bit linear PCM at 8Hz support, which is required for the G.729 support in rtpdaemon 01.04.

Version 01.03: 2007-03-05<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_21.tbz2<br\>

• Improved mixing units to support DTMF tones: 32 mixers, independent mixers(function=1 in "con" of input)

Version 01.02: 2006-11-30<br\> Description: <br\>

• DC-reduction filter on signals from backplane (to IP).(First order high pass IIR filter: timeconstant T ca 4ms, cutoff frequency ca 40 Hz)

Version 01.01: 2006-06-14<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_00.tbz2<br\><br\>

FPGA FW

/opt/amc/images/amc_ip_fpga.bit

Firmware for the FPGA. FPGA converts audio between PCM and the AlphaCom SigmaDelta format. FPGA also interfaces the time slotted audio buses on the AlphaCom backplane, and thus replaces the SBI ASIC used on earlier AlphaCom boards. <br\>

Version 01.67:<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_03.tbz2<br\><br\>

MBI driver

/opt/amc/modules/mbi_irq

MBI irq driver is a kernel mode driver which provides a signal to the AMCD main application when an interrupt is generated from the master backplane interface (MBI) <br\>

Version 01.00: Board support package 02.xx (Linux 2.4):<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_00.tbz2<br\>

Version 02.00: Board support package 03.xx (Linux 2.6):<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_03.tbz2<br\><br\>

LED / Watchdog driver

/opt/amc/modules/dev_amc_wdog

The watchdog driver is a kernel mode driver which is used for updating the hardware watchdog. This driver is also used for accessing the AMC-card LEDs <br\>

Version 01.00: Board support package 02.xx (Linux 2.4):<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_00.tbz2<br\>

Version 02.00: Board support package 03.xx (Linux 2.6):<br\> Description: Released version. <br\> Introduced in system upgrade file: alpha_sys_10_03.tbz2<br\> <br\> <br\> <br\>

Hardware Versions

<br\>

AMC hardware versions

Known problems AMC hardware 8000/4

---

None as of now<br\><br\>

---

Issue 2747: RCI not supported on ACE7:

RCI not supported on ACE7. The RCI signals on P1-c19 and P1-c22 are terminated in test points on AMC-IP. <br\>

Issue 2741: Redundancy control from APC:

The redundancy control system from APC is not working (software and hardware).<br\>

Issue 2787: AMC serial port: No RX, no data on TX:

It turns out that the RS232-drivers on the AMC-IP-board have an automatic shutdown when it detects missing received data (illegal voltage levels). This will be fixed in future hardware version, but it can be fixed on current hardware by a minor modification. Remove R698 and R695. The pins must be connected to Vcc (3,3V). <br\>

Issue 2806: “Temperature Alarm" in ACE.7:

This problem is probably related to the fact that the AMC-IP board never had a connection to the over-temp. signal from the ACE7 backplane. This is related to the problems with RCIs from the same backplane.

AMC Filter board

Issue 2723: RS422/RS485 Signal Pinning:

The pin out for RS422 signals on the filter print for E20 and E26 differs from the pin out on the E7. The Rx+ is switched with the Rx- and the Tx+ is switched with the Tx-. The only consequence is that the same cable can't be used on E7 and the E20-series. From filter print version 3 (DB8001/3) the mapping is correct.<br\>