ECPIR-3P: Difference between revisions
From Zenitel Wiki
No edit summary |
|||
| Line 1: | Line 1: | ||
{{ | {{AEPS}}[[file:ECPIR-3PFront.PNG|right|400px|thumb|Exigo call panel (102 3200 033)]] | ||
== Getting started == | == Getting started == | ||
* [[ECPIR Connections|Connecting your Turbine Intercom station]] | * [[ECPIR Connections|Connecting your Turbine Intercom station]] | ||
| Line 9: | Line 9: | ||
** [[Turbine Configuration - AlphaCom mode|Basic configuration]] | ** [[Turbine Configuration - AlphaCom mode|Basic configuration]] | ||
** [[EBMDR-8 - Configuration|Configuration for Expansion Module EBMDB-8]] | ** [[EBMDR-8 - Configuration|Configuration for Expansion Module EBMDB-8]] | ||
* [[SIP Intercom Configuration|SIP mode]] (*) | * [[Adding station to existing system (Edge)|Edge mode]] (*) | ||
* [[SIP Intercom Configuration|SIP mode]] (**) | |||
** [[Direct Access Key & Ringlist Settings (Pulse)]] | ** [[Direct Access Key & Ringlist Settings (Pulse)]] | ||
* [[IP Station Configuration - Pulse mode|Pulse mode]] (*) | * [[IP Station Configuration - Pulse mode|Pulse mode]] (**) | ||
** [[Direct Access Key & Ringlist Settings (SIP)]] | ** [[Direct Access Key & Ringlist Settings (SIP)]] | ||
:(*) SIP and Pulse mode is fully supported as from firmware version 4.7 | :(*) Edge is supported from firmware version 5.0 | ||
:(**) SIP and Pulse mode is fully supported as from firmware version 4.7 | |||
== Restore Factory Defaults and Software Upgrade == | == Restore Factory Defaults and Software Upgrade == | ||
Revision as of 16:10, 5 December 2019
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
- AlphaCom mode
- Edge mode (*)
- SIP mode (**)
- Pulse mode (**)
- (*) Edge is supported from firmware version 5.0
- (**) SIP and Pulse mode is fully supported as from firmware version 4.7
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Accessories
| File:1023201008.png | 
|
|
|
|
| EBMDR-8 | MB-30G | EMMAR-1H | EMBR-1 | EMBR-2 |
Software Requirements
This station is fully supported as form AlphaCom version 11.2.3.11