IP Heavy Duty Station V2: Difference between revisions

Latest revision as of 16:14, 3 January 2025

The device can operate in different modes. Set the mode according to the server the station should register to.

To use this device with Zenitel Connect Pro it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.

Station specific configuration for the IP Heavy Duty station:

This station is fully supported as from AlphaCom version 11.2.3.11

Additional Documentation on Zenitel.com:

@@ Line 1: / Line 1: @@
-{{AEIPS}}<gallery mode="nolines" widths=300px heights=200px>
+{{ACEIS}}<gallery mode="nolines" widths=300px heights=200px>
 File:IPHDT-Y-newZ.png|thumb|250px|(IPHDT-Y, 1008472120)
 File:IPHDT-KY-newZ.png|thumb|250px|(IPHDT-KY, 1008472100)
@@ Line 10: / Line 10: @@
 ==Configuration==
-The IP Heavy Duty Station (IPHDT-Y) can operate in different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
+The device can operate in [[Main Settings (IP Stations)|different modes]]. Set the mode according to the server the station should register to.
-General configuration:
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
 * [[SIP Intercom - Web Interface|SIP mode]]
+{{note|To use this device with [[:Category:Zenitel Connect Pro|Zenitel Connect Pro]] it must be factory defaulted. The device configuration is done from the Zenitel Connect Pro server.}}