IP-LCM
From Zenitel Wiki
The IP-LCM module is an expansion to the TKIS-2, and adds high power relays and robust control inputs to the kit without extra wiring.
DIN-rail mounting allows for a flexible I/O device that reduces the amount of wiring for I/O inside racks and other systems.
 |
| IP Line Connection Module (1008095201) |
The large robust connectors allow for connections to external cabling without adding extra terminals and have been especially chosen to enable quick and easy connection of such systems.
- 8 relay outputs
- 8 control inputs
- Robust push-in connectors for cables up to 1.5 mm2 / 16 AWG
- Device powered via the TKIS-2 kit using PoE or local power
- All TKIS-2 features are available, including:
- 1 relay
- 6 inputs
In general Zenitel offers a number of IP based kits, which can be used for a wide range of applications. See the kit comparison chart.
Contents
License Requirements
- An IP Station License is required for ICX-AlphaCom.
- An IP Station License is required in the AlphaCom.
Even if only the I/O part of the IP-LCM is used a license is required.
Getting started
Configuration
General configuration:
Device specific configuration for the IP-LCM:
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Software Release Notes
Connectors, Indicators and Dimensions
Software Requirements
The IP-LCM is fully supported from device version 4.11.x.x
When used in AlphaCom mode, this device is fully supported as from AlphaCom version 11.2.3.7