Difference between revisions of "TFIX-3-V2"

Latest revision as of 12:21, 29 January 2024

Turbine Industry - EX
(1008123130)

Highlights

Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU
Ethernet compatible 2-wire interface (FCDC-3)
Dust- and water-protected to IP66
ONVIF Compatible
Visible status indicators on front panel
Input power supply 24V-48Vdc SELV approved (48Vdc recommended)
Separate amplifier for external loudspeaker (25W/8ohm). 48Vdc input power needed.
Signal relay for external beacon (SELV approved power supply needed)
2 freely programmable pot.free inputs

TFIX-V2 Speaker and Beacon

Getting started

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Restore Factory Defaults and Software Upgrade

Connectors, Indicators and Dimensions

Accessories

Software and Hardware Requirements

This station is fully supported as form AlphaCom version 11.2.3.11
Flowire FCDC-3 is required at central location

FCDC-1 and FCDC-2 are not supported.
TFIX-3-V2 is supported from software version 6.1.3.0. Do not attempt to downgrade to software below 6.1.3.0!

Related Information

@@ Line 1: / Line 1: @@
-{{AEIS}}[[file:TFIX-3 Descr.png|thumb|400px|Turbine Industry - EX<br>(100 8123 130)]]
+{{AEIS}}
+[[file:TFIX-3-newZ.png|thumb|400px|Turbine Industry - EX<br>(1008123130)]]
+__TOC__
 ==Highlights==
 * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU
-* Ethernet compatible 2-wire interface
+* Ethernet compatible 2-wire interface (FCDC-3)
 * Dust- and water-protected to IP66
 * ONVIF Compatible
@@ Line 16: / Line 18: @@
 [[file:TFIX-V2 Speaker and Beacon.png|thumb|left|500px|TFIX-V2 Speaker and Beacon]]
 <br style="clear:both;" />
 == Getting started ==
-* [[TFIX-V2 Connections|Connections]]
 * [[Starting Up Turbine TFIX-V2 Station|Starting up]]
 * [[TFIE Keyboard Settings|TFIX Keyboard Settings]]
@@ Line 28: / Line 28: @@
 * [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
 * [[Adding station to existing system (Edge)|Edge mode]]
-* [[SIP Intercom Configuration|SIP mode]]
+* [[SIP Intercom - Web Interface|SIP mode]]
 == Restore Factory Defaults and Software Upgrade ==
 * [[TFIX Restore Factory Defaults|Restore Factory Defaults]]
 * [[Turbine Software Upgrade|Upgrade via the station web interface]]
-* [[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
+* [[IMT - Discover & Upgrade|Upgrade using the IMT tool]]
 * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
 * [[FCDC-3_-_Software_Upgrade_Procedure|FCDC-3 Software Upgrade Procedure]]
+* [[:Category:IMX28 Release notes|Software Release Notes]]
+* [[:Category:Flowire Release notes|Flowire Release notes]]
 == Connectors, Indicators and Dimensions ==
-* [[TFIX-V2 Connections|Board Connections]]
+* [[TFIX-V2 Connections|Device Connections]]
 * [[TFIX Indication LEDs|Station Indication LEDs]]
 * [[TFIE Dimensions & Mounting Instructions|Dimensions]]
@@ Line 47: / Line 49: @@
 * [[EMMAX-1H|Handheld microphone EMMAX-1H]]
-== Software Requirements ==
+== Software and Hardware Requirements ==
-This station is fully supported as form AlphaCom version 11.2.3.11
+* This station is fully supported as form AlphaCom version 11.2.3.11
+* Flowire FCDC-3 is required at central location
+{{note|
+* ''FCDC-1 and FCDC-2 are not supported. <br>
+* ''TFIX-3-V2 is supported from software version 6.1.3.0. Do not attempt to downgrade to software below 6.1.3.0!}}
 == Related Information ==
 * [[FCDC-3|Flowire FCDC-3]]
+* [[TFIX V2 - Installation Solutions]]
 * [https://www.zenitel.com/product/tfix-3-v2 Additional Documentation on Zenitel.com]
 [[Category: Turbine]]