Difference between revisions of "Stored Voice Message Feature"
From Zenitel Wiki
(→Message selection) |
(→Message selection) |
||
| Line 42: | Line 42: | ||
==Message selection== | ==Message selection== | ||
| − | When | + | When dialing feature 111 from Idle, there are two possibilities: |
* The message is already specified in parameter 1 and 2 of the directory number. This is the case for auto loaded numbers 8181, 8182. | * The message is already specified in parameter 1 and 2 of the directory number. This is the case for auto loaded numbers 8181, 8182. | ||
Revision as of 11:39, 27 September 2023
| Feature: | Stored Voice Message |
| Default directory number: | 8180, 8181, 8182 |
| Feature number: | 111 |
| Parameter 1: | Message Group |
| Parameter 2: | Message individ |
| Description: | Feature to select, listen to, or record a Stored Voice Message.
The feature can be used in combination with PA activation, multi-step to select a Stored Voice Message for playback to group. |
Autoloaded directory numbers
| Dirno | DisplayText | Feature | Parm1 | Parm2 | Parm3 | Description |
|---|---|---|---|---|---|---|
| 8180 | MsgRecord | 111 | 0 | 0 | 0 |
Station recording feature. After 8180, dial message number to record. |
| 8181 | MenuMsg1 | 111 | 11 | 1 | 0 | Customer voice menu message 1 |
| 8182 | MenuMsg2 | 111 | 11 | 2 | 0 | Customer voice menu message 2 |
Message selection
When dialing feature 111 from Idle, there are two possibilities:
- The message is already specified in parameter 1 and 2 of the directory number. This is the case for auto loaded numbers 8181, 8182.
- Two-step selection: Parameter 1 is zero. Then you can dial a directory number to select the message (to record). This is the case for auto loaded number 8180. See following table.
| Dirno dialled | Feature | Message seleceted | |
|---|---|---|---|
| 8180+ | 8191-8199 | Voice Alarm Messages | Message Group 30 + param 1 |
| 8180+ | 9550 | Auto Attendant | Message Group 11 + param 2 |
| 8180+ | 623 | Send Call Request Feature | Message Group 10 + individ 47 ("Your call is registered") |
| 8180+ | 70 | Stationreset feature | Message Group 10 + individ 42 ("No messages") |
| 8180+ | 660-669 | Mail Messages | Message Group 110 + param 1 |
| 8180+ | 770-779 | Absence Messages | Message Group 100 + param 1 |
Message recording
If the station has the Message Record Feature in its Class of service, it is possible to record the selected message from the station. It is recommended to use a station with handset to get the best result. The recorded message is an Easy Message.
Dial 8180 + feature number, then:
- M-press recording start. (Each M-press starts a new recording)
- M-release recording ends, recorded message is played back
- 7 Listen once more to the message.
- 8 Store message
- C key, disconnect without storing message.
The Station Recorded message will mask any existing message in the ASVP system or Web loaded message.
If the selected message is already a Station Recorded message, you will have to delete the Station Recorded message, before you can record a new version of the message.
Dial 8180 + feature number, then:
- 0 + M-press: delete Station Recorded message.
- Follow the procedure above to record a new message, or press C key to terminate without a new recording.
Deleting the Station Recorded message will unmask any ASVP message or Web loaded message.